This paper extends plastic load solutions proposed by the authors for 90° thin-walled elbows, to thick-walled elbows, based on three-dimensional finite element analyses using the large geometry change option. For loading, internal pressure, in-plane, and out-of-plane bending, as well as combined pressure and bending, are considered. As no experimental data are available for thick-walled elbows, the proposed solutions are indirectly validated by comparing thin-walled solutions with exiting experimental data.
SpenceJ.FindlayG. E.Limit load for elbows under in-plane bending. In Proceedings of the 2nd International Conference onPressure Vessel Technology, San Antonio 1973, 1–28, 393–399.
2.
CalladineC. R.Limit analysis of curved tubesJ. Mech. Engng Sci.16 (197485–87
3.
GoodallI. W., Lower bound limit analysis of curved tubes loaded by combined internal pressure and in-plane bending moment, CEGB report, RD/B/N4360, Central Electricity Generating Board, 1978
4.
YahiaouiK.MoretonD. N.MoffatD. G.Evaluation of limit load data for cracked elbows under opening bending and comparisons with existing solutionsInt. J. Pressure Vessels Piping79 (200227–36
5.
GriffithsJ. E.The effect of cracks on the limit load of elbows under in-plane bending: Experimental studyInt. J. Mech. Sci.21 (1979119–130
6.
HilsenkopfP.BonehB.SollogoubP.Experimental study of behavior and functional capability of ferritic steel elbows and austenitic stainless steel thin-walled elbowsInt. J. Pressure Vessels Piping33 (1988111–128
7.
GreenstreetW. L.Experimental study of plastic responses of pipe elbows, ORNL/NUREG-24, Oak-Ridge National Laboratory, TN, USA, 1978
8.
YahiaouiK.MoffatD. G.MoretonD. N.Piping elbows with cracks – part II global finite element and experimental plastic loads under opening bendingJ. Strain Analysis35 (2000 47–57 DOI: 10.1243/0309324001514008
9.
YahiaouiK.MoffatD. G.MoretonD. N.Piping elbows with cracks – part Ia parametric study of the influence of crack size on limit loads due to internal pressure and opening bendingJ. Strain Analysis35 (2000 35–46 DOI: 10.1243/0309324001513991
10.
ShalabyM. A.YounanM. Y. A.Limit loads for pipe elbows with internal pressure under in-plane closing momentsTrans. ASME, J. Pressure Vessel Technol.120 (199835–42
11.
ShalabyM. A.YounanM. Y. A.Limit loads for pipe elbows subject to in-plane opening moments and internal pressureTrans. ASME, J. Pressure Vessel Technol.121 (199917–23
12.
RobertsonA.LiH.MackenzieD.Plastic collapse of elbows under combined internal pressure and in-plane bendingInt. J. Pressure Vessels Piping82 (2005407–16
13.
ChattopadhyayJ.NatahaniD. K.DuttaB. K.KushwahaH. S.Closed-form collapse moment equations of elbows under internal pressure and in-plane bending momentTrans. ASME, J. Pressure Vessel Technol.122 (2000431–436
14.
ChattopadhyayJ.TomarA. K. S.New plastic collapse moment equations of defect-free and throughwall circumferentially cracked elbows subjected to combined internal pressure and in-plane bending momentEngng Fracture Mechanics73 (2006829–854
15.
MouradH. M.YounanM. Y. A.The effect of modeling parameters on the estimated limit loads for elbows subjected to out-of-plane moment loading and internal pressureTrans. ASME, J. Pressure Vessel Technol.122 (2000450–456
16.
MouradH. M.YounanM. Y. A.Nonlinear analysis of elbows subjected to out-of-plane moment loading and internal pressureTrans. ASME, J. Pressure Vessel Technol.123 (2001253–258
17.
MouradH. M.YounanM. Y. A.Limit load analysis of elbows under out-of-plane moment loading and internal pressureTrans. ASME, J. Pressure Vessel Technol.124 (200232–37
18.
KimY-J.OhC. S.Limit loads for elbows under combined pressure and in-plane bending based on finite element limit analysisInt. J. Pressure Vessels Piping83 (200685–90
19.
KimY-J.OhC. S.Closed-form plastic collapse loads of elbows under combined pressure and in-plane bendingEngng Fracture Mechanics73 (20061437–1454
20.
KimY-J.OhC. S.Effect of attached straight pipes on finite element limit analysis of elbowsInt. J. Pressure Vessels Piping84 (2007177–184
21.
KimY-J.LeeK. H.OhC. S.YooB.ParkC. Y.Effect of bend angle on plastic loads of elbows under internal pressure and in-plane bendingInt. J. Mech. Sci.49 (20071413–1424
22.
KimY-J.KimN. H.OhC. Y.OhC. S.A method to estimate plastic loads for elbows with non-uniform thicknessesFatigue Fracture Engng Mater. Structs31 (2008822–837
23.
LeeK. H.OhC. S.KimY-J.YoonK. B.Quantification of the yield strength-to-elastic modulus ratio effect on TES plastic loads from FE limit analyses of elbowEngng Fracture Mechanics76 (2009856–875
24.
LeeK. H.KimY-J.ParkC. Y.Plastic loads of pipe bends under combined pressure and out-of-plane bendingInt. J. Fracture149 (200831–45
