On the basis of the calculated mould temperature, a three-dimensional thermal stress model of the mould is established. A corresponding finite element method program is developed with six-face and eight-node isoparameter elements. The Newton method is used to solve the stress equations. Making using of the stress model, the thermal distortion and stress distribution of the mould are obtained when the thickness of the mould wall is different. Experimental data have been used to validate the model. From the result, it is proved that the mould stress is less than its yield strength and does not result does in residual deformation.
BrimacombeJ. K.SamasakeraI. V.LaitJ. E.Continuous casting, heat flow, solidification and crack formation, 1984 (Iron and Steel Society, Warrendale, Pennsylvania).
2.
ZanoniS.ZavanellaL.Model and analysis of integrated production-inventory system: The case of steel production. Int. J. Prod. Economics, 2005, 93–94, 197–205.
3.
SamarasekeraI. V.BrimacombeJ. K.Thermal and mechanical behaviour of continuous casting billet moulds. Ironmaking Steelmaking, 1982, 9(1), 267–281.
4.
TakeuchiE.BrimacombeJ. K.The formation of oscillation marks in the continuous casting of steel slabs. Metall. Trans. B, 1984, 15B, 493–509.
5.
VollerV. R.SwaminathanC. R.ThomasB. G.Fixed grid techniques for phase-change problems: A review. Int. J. Numer. Meth. Engng, 1990, 30, 875–898.
6.
HuespeA. E.CardonaA.FachinottiV.Thermomechanical model of a continuous casting process. Int. J. Computer Methods Appl. Mech. Engng, 2000, 182, 439–455.
7.
JanikM.DyjaH.Modelling of three-dimensional temperature field inside the mould during continuous casting of steel. J. Mater. Processing Technol., 2004, 157–158, 177–182.
8.
JanikM.DyjaH.BerskiS.BanaszekG.Two-dimensional thermomechanical analysis of continuous casting process. J. Mater. Processing Technol., 2004, 153–154, 578–582.
9.
ChandraS.BrimacombeJ. K.Samarase-keraI. V.Mould-strand interaction in continuous casting of steel billets. Part 3, mould heat transfer and mould taper. Ironmaking Steelmaking, 1993, 20(2), 104–112.
10.
XieY.YuH.RuanX.WangB.MaY.FE numerical simulation of mould temperature field during the continuous casting of steel. Int. J. Advd Mfg Technol., 2006, 30(7–8), 645–651.
11.
XieY.YuH.RuanX.WangB.MaY.Mathematical modeling of mould temperature field during continuous casting of steel. J. Mater. Processing Technol., 2008, 199(1), 49–55.
12.
WangQ.LiangS.FanZH. K.The current status and developing trend of mould materials in continuous casting machine (in Chinese). J. Spec. Foundry Colored Alloys, 2001, 2, 24–25.
13.
WangB.SamarasekeraI. V.Optimization design of mould taper in continuous casting of stainless steel billets (in Chinese). J. Continuous Casting, Suppl., 2000, 6, 109–112.
