This work used the crack compliance method for the determination of residual stresses in beams subjected to prior straining before the introduction of residual stresses through bending. The paper also introduces a support system that allows free movement of specimens during cutting by electric discharge machining. The experimental testing and verification procedure considered factors such as different materials and strain hardening levels. The results obtained provide a quantitative demonstration of the effect of prior strain hardening on residual stress distribution in beams.
BauschingerJ.Changes of the elastic limit and the modulus of elasticity on various metalsZivilingenieur, 1881, 27, 289–353.
2.
BauschingerJ.On the changes of the elastic limit and strength of iron and steel, by drawing out, by heating and cooling, and by repetition of loadingMittheilungen aus dem mechanischen technischen Laboratorium der k, 1886, pp. 463–465 (Hochschule in Munchen, Munchen).
3.
SidebottomO. M.ChangC.-T.Influence of the Bauschinger effect on inelastic bending of beams, 1963, pp. 631–639 (University of Illinois, Chicago, Illinois).
4.
ChenP. C. T.Bauschinger and hardening effects on residual stresses in autofrettaged thick-walled cylindersJ. Pressure Vessels Technol., 1986, 108, 108–112.
5.
TimoshenkoS. P.GereJ. M.Mechanics of materials, 1979, pp. 358–360 (Van Nostrand Reinhold, New York).
6.
ChengW.FinnieI.An overview of the crack compliance method for residual stress measurement. In Proceedings of the Fourth International Conference onResidual stress, Baltimore, Maryland, USA, 1994, pp. 449–458 (Society for Experimental Mechanics, Bethel, Connecticut).
7.
NowellD.TochilinS.HillsD. A.Measurement of residual stress in beams and plates using the crack compliance techniqueJ. Strain Analysis, 2000, 35 (4), 277–285.
8.
SchindlerH. J.ChengW.FinnieI.Measurement of residual stress distribution in a disk or a solid cylinder using the crack compliance method. In Proceedings of the Fourth International Conference onResidual stress, Baltimore, Maryland, USA, 1994, pp. 1266–1274 (Society for Experimental Mechanics, Bethel, Connecticut).
9.
KangK. J.SongJ. H.EarmmeY. Y.A method for the measurement of residual stresses using a fracture mechanics approachJ. Strain Analysis, 1989, 24, 23–30.
10.
WuX. R.CarlsonA. J.Weight function and stress intensity factor solutions, 1991 (Pergamon Press, Oxford).
11.
Urriolagoitia-SosaG.DurodolaJ. F.FellowsN. A.Determination of residual stress in beams under Bauschinger effect using surface strain measurementsStrain, 2003, 39 (4), 177–185.
12.
Urriolagoitia-SosaG.DurodolaJ. F.FellowsN. A.Determination of tensile and compressive stress-strain curves from bend tests. InAdvances in experimental mechanics (Ed. LucasM.), Appl. Mechanics Mater., 2004, 1–2, 133–138.
