The fatigue behaviour of a representative high-performance aero-engine spline coupling is investigated under test conditions designed to simulate in-service conditions. The test load cycles consist of major cycle torque and axial load, simulating maximum thrust, combined with minor cycle rotating bending moment and fluctuating torque, simulating life-limiting conditions at take-off. The objective of the study is to develop understanding of the fatigue behaviour of the coupling over a range of loading conditions, including interaction between low-cycle fatigue, fretting fatigue and fretting wear. This information is necessary for the development of fatigue and fretting-fatigue life prediction techniques. The test results are interpreted with the help of three-dimensional finite element models, which include the frictional contact between the spline teeth.
BillR. C.Fretting wear and fretting fatigue—how are they related?Trans. ASME, J. Lubric. Technol., April 1983, 105, 230–238.
5.
JohnsonK. L.Contact Mechanics, 1985 (Cambridge University Press, Cambridge).
6.
HillsD. A.NowellD.Mechanics of Fretting Fatigue, 1994 (Kluwer, Dordrecht).
7.
CattaneoC.Sul contatto di due corpi elastici: Distribuzion locale sforziReconditi Accad. Naz. Lincei, 1938, 27, 342–348, 434–436, 474–478.
8.
MindlinR. D.Compliance of elastic bodies in contactTrans. ASME, J. Appl. Mechanics, 1949, 16, 259–268.
9.
PoritskyH.Stress and deflections of cylindrical bodies in contact with application to contact of gears and of locomotive wheelsTrans. ASME, J. Appl. Mechanics, 1950, 17, 191–201.
10.
DobrimirskiJ. M.Variables of fretting process: Are there 50 of them? In Standardisation of Fretting Fatigue Test Methods and Equipment, ASTM STP 1159 (Eds AttiaM. H.WaterhouseR. B.), 1992, pp. 60–66 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
VincentL.BertheirY.DubourgM. C.GodetM.Mechanics and materials in frettingWear, 1992, 153, 135–148.
13.
HillsD. A.Urriolagoitia-SosaG.Brief note: Some observations on the parametric relationships in Hertzian fretting fatigue testsJ. Strain Analysis, 2000, 35 (5), 441–443.
14.
VolfsonB. P.Stress sources and critical stress combinations for splined shaftJ. Mech. Design, July 1982, 104, 551–556.
15.
LeikinA. S.Vasil'evaG. A.Stress concentration and distribution in straight-sided splined shafts in torsionRuss. Engng J., 1974, 54 (3), 39–43.
16.
IvanovS. I.Residual stresses and fatigue resistance of splined shaftsSoc. Engng Res., 1985, 5 (7), 5–7.
17.
LevinaZ. M.Friction and wear in spline connectionsMach. Tooling, 1966, 37 (11), 14–21.
18.
LevinaZ. M.ReshetovD. N.Cyclic sliding in spur gear splined joints and nominal calculation of their wear-resistanceRuss. Engng J., 1974, 54 (7), 11–17.
19.
SkundinG. I.NikitinV. N.Wear resistance of straight splined jointsRuss. Engng J., 1971, LI (5), 8–11.
20.
TjenbergA.Load distribution in the axial direction in a spline couplingEngng Failure Analysis, 2001, 8, 557–570.
21.
TjenbergA.Load distribution and pitch errors in a spline couplingMater. Des., 22, 2001, 259–266.
22.
LeenS. B.HydeT. R.WilliamsE. J.BeckerA. A.McCollI. R.HydeT. H.TaylorJ. W.Development of a representative test specimen for frictional contact in splined joint couplingsJ. Strain Analysis, 2000, 35 (6), 521–544.
LeenS. B.RatsimbaC. H. H.WilliamsE. J.McCollI. R.Fatigue of a representative aeroengine splined coupling. In Fatigue 2002, Proceedings of the 8th International Fatigue Congress (Ed. BlomA. F.), Stockholm, Sweden, June 2002, Vol. II, pp. 1079–1086.
25.
LeenS. B.RichardsonI. J.McCollI. R.WilliamsE. J.HydeT. R.Macroscopic fretting variables in a splined coupling under combined torque and axial loadJ. Strain Analysis, 2001, 36 (5), 481–497.
26.
ABAQUS User's and Theory Manuals, Version 6.1, 2001 (Hibbit, Karlsson, and Sorensen, Pawtucket, Rhode Island).
27.
VincentL.BerthierY.GodetM.Testing methods in fretting fatigue: A critical appraisal In Standardisation of Fretting Fatigue Test Methods and Equipment, ASTM STP 1159 (Eds AttiaM. H.WaterhouseR. B.), 1992, pp. 33–48 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
