This paper analyses the effect of bulk stress applied in the specimen on the contact conditions and stresses during a fretting fatigue test. The problem considered corresponds to that of a fretting bridge test using spherical contact pads. A three-dimensional finite element model together with a mesh subdivision h-adaptive procedure has been used. This has allowed for the evaluation of a precise solution at a reasonable computational cost. Finite element results have been compared with existing analytical models.
DomínguezJ.Cyclic variations in friction forces and contact stresses during fretting fatigueWear, 1998, 218, 43–53.
2.
McVeighP. A.FarrisT. N.Finite element analysis of frettingstresses.Trans.ASME, J.Tribology, 1997, 119, 797–801.
3.
HillsD. A.NowellD.Mechanics of fretting fatigue testsInt. J. Mech. Sci., 1987, 29 (5), 355–365.
4.
AmbricoJ. M.BegleyM. R.The role of macroscopic plastic deformation in fretting fatigue life predictionsInt. J. Fatigue, 2001, 23, 121–128.
5.
TsaiC. T.MallS.Elasto-plastic finite element analysis of fretting stresses in pre-stressed strip in contact with cylindrical padFinite Elements Analysis Des., 2000, 36, 171–187.
6.
IyerK.Peak contact pressure, cyclic stress amplitudes, contact semi-width and slip amplitude: Relative effects on fretting fatigue lifeInt. J. Fatigue, 2001, 23, 193–206.
7.
KralE. R.KomvopoulosK.Three-dimensional finite element analysis of surface deformation and stresses in an elastic-plastic layered medium subjected to indentation and sliding contact loadingJ. Appl. Mechanics, 1996, 63, 365–375.
8.
KralE. R.KomvopoulosK.Three-dimensional finite element analysis of subsurface stresses and shakedown due to repeated sliding on a layered mediumJ. Appl. Mechanics, 1996, 63, 967–973.
9.
KralE. R.KomvopoulosK.Three-dimensional finite element analysis of subsurface stress and strain fields due to sliding contact on an elastic-plastic layered mediumTrans. ASME, J. Tribology, 1997, 119, 332–341.
Vu-QuocL.ZhangX.LesburgL.Normal and tangential force-displacement relations for frictional elasto-plastic contact of spheresInt. J. Solids Structs, 2001, 38, 6455–6489.
12.
CattaneoC.Sul contatto di due corpi elastici: Distribuzion locale degli sforziReconditi II Accad. Nazi. Lincei, 1939, 27, 342–348, 434–436, 474–478.
13.
MindlinR. D.DeresiewiczH.Elastic spheres in contact under varying oblique forcesJ. Appl. Mechanics, 1953, 75, 327–344.
14.
MindlinR. D.Compliance of elastic bodies in contactJ. Appl. Mechanics, 1949, 16, 259–268.
15.
HamiltonG. M.GoodmanL. E.The stress field created by a circular sliding contactJ. Appl. Mechanics, 1966, 33, 371–376.
16.
HamiltonG. M.Explicit equations for the stresses beneath a sliding spherical contactProc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 1982, 197 (C1), 53–59.
17.
SackfieldA.HillsD. A.A note on the Hertz contact problem: A correlation of standard formulaeJ. Strain Analysis, 1983, 18 (3), 195–197.
18.
WittkowskyB. U.BirchP. R.DomínguezJ.SureshS.An experimental investigation of fretting fatigue with spherical contact in 7075-T6 aluminum alloyIn Fretting Fatigue: Current Technology and Practices, ASTM STP 1367 (Eds HoeppnerD. W.ChandrasekaranV.ElliotC. B.), 1999 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
19.
NavarroC.DomínguezJ.Contact conditions and stresses induced during fretting fatigueComput. Meth. Contact Mechanics, 2001, 1, 453–462.
20.
TurM.FuenmayorJ.RódenasJ. J.GinerE.3D analysis of the influence of specimen dimensions in fretting stressesFinite Elements Analysis Des., 2002 (in press).
21.
ABAQUS/Standard User's Manual, Version 5.8, 1996 (Hibbit, Karlsson and Sorensen, Pawtucket, Rhode Island).
22.
FuenmayorF. J.OliverJ. L.Criteria to achieve nearly optimal meshes in the h-adaptive finite element methodInt. J. Numer. Meth. Engng, 1996, 39, 4039–4061.
23.
RódenasJ. J.TurM.TarancónJ. E.FuenmayorF.h-Adaptatividad de elementos finitos en refinamiento por subdivision de malla. In Congreso Nacional de Ingeniería Mecánica III, 2000, pp. 1652–1658.
24.
ZienkiewiczO. C.ZhuJ. Z.A simple error estimator and adaptive procedure for practical engineering analysisInt. J. Numer. Meth. Engng, 1987, 24, 337–357.
25.
BuczkowskiR.21-node hexahedral isoparametric element for analysis of contact problemsCommun. Numer. Meth. Engng, 1998, 14, 681–692.
26.
LamaqV.DubourgM. C.VincentL.Crack path prediction under fretting fatigue — a theoretical and experimental approachTrans. ASME, J. Tribology, 1996, 118, 711–720.
