A method has been developed to calculate the stresses in a plate containing a hole filled with a fastener (interference fit or clearance fit) with applied bolt load (in any direction) and subjected to any remote load (σ∞x σ∞y and τ∞xy). The material of the fastener can be different from that of the plate. The results using this method have been compared with finite element results and existing analytical results which had been solved for some special cases. Very good accuracy has been achieved.
JonesM. R.The local stress approach—on stresses in plates containing interference fit fasteners. Airbus Technical Report R&T/B5606/65681, British Aerospace, 1997.
2.
MuskhelishviliN. I.Some Basic Problems of the Mathematical Theory of Elasticity, 1963 (Noordhoff, Leyden).
3.
StippesM.WilsonH. B.JrKrullF. N.A contact stress problem for a smooth disk in an infinite plate. In Proceedings of the 4th US National Congress onApplied Mechanics, 1962, Vol. 2, pp. 799–806 (American Society of Mechanical Engineers, New York).
4.
PerssonA.On the stress distribution of cylindrical elastic bodies in contact. PhD thesis, Chalmers Technical University, Göteborg, Sweden, 1964.
5.
HowardB.WilsonH. B.JrApproximate determination of contact stresses in an infinite plate with a smooth circular insert In Developments in Theoretical and Applied Mechanics, Vol. 2, 1964, pp. 147–163 (Pergamon, Oxford).
6.
CiavarellaM.DecuzziP.The state of stress induced by the plane frictionless cylindrical contact. II: The general case (elastic dissimilarity)Int. J. Solids Structs, 2001, 38, 4525–4533.
7.
TimoshenkoS.GoodierJ. N.Theory of Elasticity, 1951, p. 116 (McGraw-Hill, New York).
