Previously the deep-hole method was developed to measure residual stresses in thick-section engineering components. In this paper it is demonstrated that stresses arising from external applied loading can also be measured. A series of calibration studies using aluminium and steel samples, with thicknesses varying from 5 to 50 mm, are presented. The samples were subjected to tensions, bending and torsion. It is shown that the deep-hole method can measure linear and non-linear stress distributions.
De AngelisV.SampiertriC.Report on the state of the art regarding the problem of residual stresses in welds of LMFBR components. Report 5495, CISE Technologie Innovative, 1990.
2.
LiuJ.Handbook of Measurement of Residual Stresses, 1997 (Society for Experimental Mechanics, Fairmont Press, Bethel, Connecticut).
3.
BateS. K.GreenD.ButtleD. J.A Review of residual Stress Distributions in Welded Joints for the Defect Assessment of Offshore Structures, OHT 482, 1997 (HMSO, London).
4.
NoyanI. C.CohenJ. B.Residual Stresses—Measurement by Diffraction and Interpretation, 1987 (Springer-Verlag, Berlin).
5.
ParlaneA. J. A.The determination of residual stresses—a review of contemporary measurement techniques. InResidual Stresses in Welded Construction and Their Effects, Vol.1, 1977, Paper 8, pp. 63–78.
6.
KellerH. P.KerkoffH.GiffelerR.MeinhardtJ.Residual stresses and their influence on the integrity of pressure vessel. Report SB 203/89, T and V Rheinland Institut for Material Testing, 1989.
ProcterE.The basic centre hole techniqueResidual Stresses in Welded Construction, TWI Seminar, Newcastle, 1985.
9.
KeilS.Experimental determination of residual stresses with the ring core method and an on-line measurement system In Experimental Techniques, 1993, pp. 17–24 (Society for Experimental Mechanics, Bethal, Connecticut).
10.
BonnerN. W.Measurement of residual stresses in thick section steel welds. PhD thesis, University of Bristol, 1996.
11.
PrimeM. B.Residual stress measurement by successive extension of a slot: The crack compliance methodAppl. Mechanics Rev., 1999, 52 (2), 75–96.
12.
LeggattR. H.Residual stresses and distortion in multi-pass butt welded joints in type 316 stainless steel. In Proceedings of the International Conference onResidual Stresses, Germany, 1986, Vol.1, pp. 997–1004.
13.
HillM. R.NelsonD. V.The inherent strain method for residual stress determination and its application to a long welded joint In Structural Integrity of Pressure Vessels, Piping and Components—1995, 1995, PVP-Vol. 318, pp. 343–352 (American Society of Mechanical Engineers, New York).
14.
BeaneyE. M.Measurement of sub-surface stress. Report RD/ B/N4325, Central Electricity Generating Board, 1978.
15.
ZhdanovI. M.GoncharA. K.Determining residual stresses at a depth in metalsAutom. Weld., 1978, 31 (9), pp. 22–24.
16.
LeggattR. H.SmithD. J.SmithS. D.FaureF.Development and experimental validation of the deep-hole method for residual stress measurementsJ. Strain Analysis, 1996, 31 (3), 177–186.
17.
SmithD. J.BonnerN. W.Measurement of residual stresses in thick section steel welds In Engineering Integrity Assessment (Eds EdwardsJ.H.KerrJ.StanleyP.), 1994, pp. 259–274 (Engineering Materials Advisory Services, Chameleon Press).
18.
BonnerN. W.SmithD. J.Measurement of residual stresses using the deep-hole methodInt. J. Pressure Vessels Piping, 1996, 327, 53–65.
19.
BonnerN. W.SmithD. J.LeggattR. H.Measurement of residual stresses in thick section steel welds. In Proceedings of the 10th International Conference onExperimental Mechanics, 1994, pp 767–772 (A.A. Balkema, Rotterdam).
20.
Garcia-GranadaA. A.GeorgeD.SmithD. J.Assessment of distortions in the deep-hole technique for measuring residual stresses. In Proceedings of the 11th International Conference onExperimental Mechanics, Oxford, August 1998, pp. 1301–1306.
21.
GeorgeD.Determination of residual stresses in large section stainless steel welds. PhD thesis, University of Bristol, 2000.
22.
SmithD. J.BouchardJ.GeorgeD.Measurement and prediction of through thickness residual stresses in thick section weldsJ. Strain Analysis, 2000, 35 (4), 287–305.
23.
TimoshenkoS.GoodierJ. N.Theory of Elasticity, 2nd edition, 1951, pp. 258–280 (McGraw-Hill, New York).
24.
PriestM.The experimental charaterisation of residual stresses and fatigue crack growth in the vicinity of cold worked holes in Al2024-T351. PhD thesis, University of Bristol, 1997.
