This paper is concerned with the stress state induced by a radial force applied to a circular shaft, shrink fitted into a plate. Conditions for the avoidance of separation and slip are considered, together with the overall strength of the contact. The problem is considered as a complete or receding contact, and solutions are developed by two independent routes, which bracket the perfectly lubricated and adhesive bounds to the problem, and which provide a versatile design route.
BS 449, Part 2:1969 The Design of Structural Steelwork, 1969 (British Standards Institution, London).
2.
PerssonA.On the stress distribution of cylindrical elastic bodies in contact. PhD thesis, Göteborg, 1964.
3.
JohnsonK. L.Contact Mechanics, 1985 (Cambridge University Press, Cambridge).
4.
HouJ. P.HillsD. A.Contact between a pin and plate with hole under interference-fit and clearance-fit conditionsProc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 2001, 215 (C6), 629–639.
5.
TimoshenkoS. P.GoodierJ. N.Theory of Elasticity, 2nd edition, 1951 (McGraw-Hill, New York).
