This paper presents a non-contact and non-destructive method for full-field in-plane strain measurements. Digital image processing is employed for monitoring the deformations of grid lines marked on a planar surface of a component or a specimen. Full-field in-plane strain distributions are obtained by processing the geometrical characteristics of the grid with computer graphics algorithms. The strain field determined in the necking zone of a tensile specimen has demonstrated the benefit of the method.
GoldreinH. T.PalmerS. J.HuntleyJ. M.Automated fine grid technique for measurement of large-strain deformation mapsOptics Lasers Engng, 1995, 23, 305–318.
12.
D'AcquistoL.ParasporoF.PetrucciG.Automated grid method based on digital image processing. In Proceedings of the 1995, BSSM Conference, Sheffield, 1995, pp. 37–39.
13.
BaroneS.BeghiniM.BertiniL.An image processing based automated grid method using square pattern grids. In Proceedings of the 1998 SEM Spring Conference onExperimental and Applied Mechanics, Houston, Texas, 1998, pp. 3–5.
14.
BaroneS.BeghiniM.BertiniL.StoraiM.A development of the grid method for strain analysis (in Italian). In Proceedings of the 25th AIAS National Conference, Perugia, Italy, 1998, 209–218.
15.
DupréJ. C.BrémandF.LagardeA.Numerical spectral analysis of a grid: Application to strain measurementsOptics Lasers Engng, 1993, 18, 159–172.
16.
DupréJ. C.CottronM.LagardeA.Grating interrogations: From small to large strain measurementExpl Mechanics, 1995, 35, 153–158.
17.
ChuT. C.RansonW. F.SuttonM. A.PetersW. H.Applications of digital-image-correlation techniques to experimental mechanicsExpl Mechanics, 1985, 25, 232–244.
18.
SevenhuijsenP. J.Two simple methods for deformation demonstration and measurementStrain, 1981, 17 (1), 20–24.
19.
GonzalesR. C.WoodsR. E.Digital Image Processing, 1993 (Addison-Wesley, New York).
20.
BeghiniM.Applications of the least-squared cubic spline interpolation to mechanics (in Italian). In Proceedings of the Ninth ADM National Conference, Caserta, Italy, 1995, pp. 381–391.
21.
KreyszigE.Advanced Engineering Mathematics, 7th edition, 1993 (John Wiley, New York).
22.
FarinG.Curves and Surface for Computer Aided Geometric Design, 1990 (Academic Press, London).
23.
ParksV. J.DurelliJ.Various forms of the strain-displacement relations applied to experimental strain analysisExpl Mechanics, 1964, 4, 37–47.
