A well-characterized residual stress distribution resulting from four-point bending has been analysed using the neutron diffraction technique. Residual stresses were obtained from the strains measured at discrete positions through the bent bar on the (111) and (311) crystal planes of a nickel-based alloy using the appropriate diffraction elastic constants. In addition a profile refinement method was used to determine the residual stresses from average strains from all the diffraction peaks in the spectrum. The measured residual stress profiles have also been compared with strain gauge data and with analytical and finite element predictions. It has been established that the profile refinement approach gives stresses which most closely match those obtained by the non-diffraction techniques.
StaceyA.WebsterG. A.Influence of residual stress on fatigue crack growth in thick-walled cylinders. In Proceedings of the ASTM Symposium onAnalytical and Experimental Methods of Residual Stress Effects in Fatigue (Eds ChampouxR. L.UnderwoodJ. H.KappJ. A.), ASTM STP 1004, 1988, pp. 107–121 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
2.
AlmerJ.D.CohenJ.B.McCallumK.R.WinholtzR.A.X-ray diffraction and finite element study of residual stress effects on fatigue crack growth. In Proceedings of the Fifth International Conference onResidual Stresses (Eds EricssonT.OdénM.AnderssonA.), Linköping, Sweden, 16–18 June 1997, 1998, pp. 1072–1077 (Institute of Technology Linköping University, Linköping).
3.
MughrabiH.BernhardD.FengH.VetterG.Optimal residual stresses introduced in thick-walled tubes by low-temperature autofrettage: Enhancement of fatigue resistance against pulsating internal pressures. In Proceedings of the Fifth International Conference onResidual Stresses (Eds EricssonT.OdénM.AnderssonA.), Linköping, Sweden, 16–18 June 1997, 1998, pp. 1084–1089 (Institute of Technology, Linköping University, Linköping).
4.
EricssonT.OdénM.AnderssonA. (Eds) In Proceedings of the Fifth International Conference on Residual Stresses, Linköping, Sweden, 16–18 June 1997, 1998 (Institute of Technology, Linköping University, Linköping).
5.
MacherauchE.KloosK. H.Origin, measurement and evaluation of residual stresses. In Proceedings of the International Conference onResidual Stresses, Garmisch-Partenkirchen, Germany, pp. 3–26.
6.
LuJ.RetrainteD.A review of recent developments and applications in the field of X-ray diffraction for residual stress studiesJ. Strain Analysis, 1998, 33 (2), 127–136.
7.
ChengW.FinnieI.An overview of the crack compliance method for residual stress measurements. In Proceedings of the Fourth International Conference onResidual Stresses, Baltimore, Maryland, 8–10 June 1994, pp. 449–458 (Society for Experimental Mechanics, Bethel, Connecticut).
8.
HoldenT. M.HosbonsR. R.MacEwenS. R.FlowerE. C.BourkeM. A.M.GoldstoneJ. A.Comparison between finite element calculations and neutron diffraction measurements of residual stress in a diametrically compressed ring In Measurement of Residual and Applied Stress Using Neutron Diffraction (Eds HutchingsM. T.KrawitzA. D.), 1992, pp. 93–112 (Kluwer, Deventer).
9.
LorentzenT.NielsenE. B.Neutron diffraction strain measurements on shrink-fit ring assembly. In Proceedings of the Fourth International Conference onResidual Stresses, Baltimore, Maryland, 8–10 June 1994, Vol.1, pp. 163–172 (Society for Experimental Mechanics, Bethel, Connecticut).
10.
FaurholdtT.LorentzenT.Measurements of residual stresses in a sheet metal bending specimen. In Proceedings of the Fifth International Conference onResidual Stresses (Eds EricssonT.OdénM.AnderssonA.), Linköping, Sweden, 16–18 June 1997, 1998, pp. 82–87 (Institute of Technology, Linköping University, Linköping).
11.
LudtkaG. M.MacEwenS. R.A comparison of residual stresses determined experimentally by a neutron-diffraction technique with analytically predicted values. IJ. Metals, 1988, 40 (11), 105.
12.
AllenA. J.AndreaniC.HutchingsM. T.WindsorC. G.Neutron diffraction methods for the study of residual stress fieldsAdv. Phys., 1985, 34, 445–473.
13.
WebsterG. A.EzeiloA. N.Principles of the measurement of residual stress by neutron diffraction In New Instruments and Science around SINQ, PSI Proceedings 96002 (Ed. FurrerA.), November 1996, pp. 217–234 (Paul Scherrer Institute, Zonz, Switzerland).
14.
PintchoviusL.JungV.MacherauchE.SchaferR.VohringerO.Determination of residual stress distributions in the interior of technical parts by means of neutron diffraction. In Sagamore Army Materials Research Conference Proceedings, Vol. 28, 1982, pp. 467–482.
15.
DaymondM. R.BourkeM. A. M.Von DreeleR. B.ClausenB.LorentzenT.Use of Rietveld refinement for elastic macrostrain determination and for evaluation of plastic strain history from diffraction spectraJ. Appl. Physics, 15 August 1997, 82 (4), 1554–1562.
16.
ReussA.Berechnung der Fliessgrenze von Mischkristallen aufgrund der Plastizitatsbedingung fuer EinkristalleZ. Angew. Mathematik Mechanik, 1924, 9, 49.
17.
VoigtW.Lehrbuch der Kristallphysik, 1928, p. 962 (Teubner, Leipzig).
18.
KronerE.Berechnung der elastischen Konstante des Vielkristalls aus den Konstanten des EinkristallsZ. Physik, 1958, 151, 504.
19.
EzeiloA. N.WebsterG. A.WebsterP. J.WangX.Characterisation of elastic and plastic deformation in a nickel superalloy using pulsed neutronsPhysica B, 1992, 180–181, 1044–1046.
20.
DjapicL.EzeiloA. N.WebsterG. A.The effect of cyclic deformation on the elastic constants in a nickel super-alloy's neutronsPhysica B, 1995, 213–214, 797–799.
21.
WangD. Q.EdwardsL.Pulsed neutron strain scanning. Technical Report FRG/97/3/1, Faculty of Technology, The Open University, Milton Keynes, 1997.
