A general formulation obtained based on an inductive procedure is presented for the stress distribution in multi-material power-law creeping structures. The ratios of the nominal creep rates for the various materials are explicitly included in the formulation. It is only necessary to define the effects of the stress exponent n. The results are generalized to the case where n varies between materials. The formulation allows the effects of the material properties to be easily assessed and the results of parametric analyses to be presented in compact and easily manageable forms.
ASME, Boiler and Pressure Vessel Code, Section III, Rules for Construction of Nuclear Power Plant Components, Division 1, Subsection NH, Class 1 Components in Elevated Temperature Service, 1995.
2.
RCC-MR, Design and Construction Rules for Mechanical Components of FBR Nuclear Islands, June 1985 (AFCEN, Paris); see also Addendum 1, November 1987.
3.
AinsworthR. A. (Ed.) R5: Assessment Procedure for the High Temperature Response of Structures, Issue 2, 1998 (British Energy plc, Gloucester).
4.
ColemanM. C.ParkerJ. D.WaltersD. J.The behaviour of ferritic weldments in thick section 2Cr2Mo3V pipe at elevated temperatureInt. J. Pressure Vessels Piping, 1985, 18, 277–310.
5.
BS PD 6539:1994 Guide to Methods for the Assessment of the Influence of Crack Growth on the Significance of Defects in Components Operating at High Temperatures (British Standards Institution, London).
6.
BuddenP. J.GoodallI. W.Assessment procedures and design codes. In Proceedings of the IOM-IMechE Conference onthe Integrity of High-Temperature Welds, Nottingham, 1998, pp. 309–322.
7.
HallF. R.HayhurstD. R.Continuum damage mechanics modelling of high temperature deformation and failure in a pipe weldmentProc. R. Soc. Land. A, 1991, 443, 383–403.
8.
HydeT. H.SunW.Creep of welded pipesProc. Inst. Mech. Engrs, Part E, Journal of Process Mechanical Engineering, 1998, 212 (E3), 171–182.
9.
NicolD. A.The creep behaviour of cross-weld specimens under uniaxial loadingsInt. J. Engng Sci., 1985, 23, 541–553.
10.
CraineR. E.HawkesT. D.On the creep of ferritic weldments containing multiple zones in plates under uniaxial loadingJ. Strain Analysis, 1993, 28 (4), 303–309.
11.
CraineR. E.NewmanM. G.Modelling creep failure in welded plates under uniaxial loadingJ. Strain Analysis, 1996, 31 (2), 117–124.
12.
BuglinoV.DeliaM. A.MasnataA.MegnaG.Welded joint behaviour under conditions of creep. In Proceedings of the IOM-IMechE Conference onThe Integrity of High-temperature Welds, Nottingham, 1998, pp. 333–341.
13.
HydeT. H.YehiaK.SunW.Observation on the creep of two-material structuresJ. Strain Analysis, 1996, 31 (6), 441–461.
14.
HydeT. H.SunW.Stress singularities at the free surface of an axisymmetric two-material creep test specimenJ. Strain Analysis, 1997, 32 (2), pp. 107–117.
15.
HydeT. H.SunW.A method for estimating the stress distributions on the centre line of an axisymmetric, two-material, cross-weld, creep test specimensInt. J. Mech. Sci., 1997, 39 (8), 885–898.
16.
ABAQUS Version 5.5, 1996 (Hibbit, Karlsson and Sorenson, Incorporated, Pawtuchet, Rhode Island).
17.
FEMGEN/FEMVIEW, 1996 (Fensys Limited).
18.
HydeT. H.SunW.Determining high temperature properties of weld materials. In Proceedings of the International Conference onAdvanced Technology in Experimental Mechanics, July 1999.
19.
HydeT. H.SunW.BeckerA. A.WilliamsA. J.Creep continuum damage constitutive equations for the base, weld and heat-affected zone materials of a service-aged 1/2Cr1/2Mo1/4V:2 1/2CrIMo multi-pass weld at 640 ° CJ. Strain Analysis, 1997, 32 (4), 273–285.
20.
StoresundJ.TuS.-T.Geometrical effect on creep in cross weld specimensInt. J. Pressure Vessels Piping, 1995, 62, 179–193.
21.
HydeT. H.TangA.SunW.Parametric analysis of stresses and deformations in a pipe with a circumferential weld under creep conditions. In Proceedings of the IOM-IMechE Conference onThe Integrity of High-Temperature Welds, Nottingham, 1998, pp. 323–329.
22.
LawM.PaytenW.Weld performance under creep using finite element modellingInt. J. Pressure Vessels Piping, 1997, 72, 45–49.
