HachemM. M., MahinS. A., and MoehleJ. P., 2003. Performance of Circular Reinforced Concrete Bridge Columns under Bidirectional Earthquake Loading, Tech. Rep. 2003/06, Pacific Earthquake Engineering Research Center, University of California, Berkeley.
2.
JeongH. I., SakaiJ., and MahinS. A., 2008. Shaking Table Tests and Numerical Investigation of Self-Centering Reinforced Concrete Bridge Columns, Tech. Rep. 2003/06, Pacific Earthquake Engineering Research Center, University of California, Berkeley.
3.
LeeW. K., 2007. Simulation and Performance-Based Earthquake Engineering Assessment of Self-Centering, Post-Tensioned Concrete Bridge Systems, Ph.D. Thesis, Stanford University, California.
4.
LeeW. K., and BillingtonS., 2010. Modeling residual displacements of concrete Bridge Columns under Earthquake Loads Using Fiber Elements. Journal of Bridge Engineering15, 201–249.
5.
MenegottoM., and PintoP. E., 1973. Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending, International Association for Bridge and Structural Engineering (IABSE) Symposium on the Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, Lisbon, Portugal.
6.
SakaiJ., JeongH., and MahinS. A., 2006. Reinforced concrete bridge columns that re-center following earthquakes, in Proceedings of the 8th U.S. National Conference on Earthquake Engineering, Paper No. 1421, California.
7.
YazganU., 2009. The Use of Post-Earthquake Residual Displacements as a Performance Indicator in Seismic Assessment, Ph.D. Thesis No. 18645, Swiss Federal Institute of Technology (ETH), Zurich, Switzerland, available at http://e-collection.ethbib.ethz.ch/view/eth: 785 (last accessed 16 September 2012).
