Abstract
The P-wave seismogram method is used to develop estimates of the time averaged shear wave velocity of the upper 30 m (VS30) at 251 seismic stations in Texas, Oklahoma, and Kansas. Geologic conditions at the sites are documented using large-scale geologic maps. The VS30 values from the P-wave seismogram method agree well with the limited in situ measurements across the study area and correlate well with the mapped geologic units. Compared with the VS30 proxy values assigned to the stations by the Next Generation Attenuation–East (NGA-East) project, the P-wave seismogram method generally produces larger VS30 estimates. These differences are likely due to the fact that very few V S measurements in Texas, Oklahoma, and Kansas were available for use in the development of the NGA-East proxies. Analysis of the P-wave seismogram VS30 values indicates that, in this geographic area, incorporating rock type along with geologic age better distinguishes the average VS30 of these materials than geologic age alone.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
