Abstract
Expressions for the expected value of the first mode damping ratio are derived by using 122 seismic responses from concrete buildings and 81 from steel. The results include dissipation at the soil-structure interface and are appropriate for situations in which this source of dissipation is not included in the model. Comparisons between models of different complexity indicate the appropriateness of using a single regressor, for which the building height is used. It is shown that the Fisher information about damping increases with the number of response cycles; this result is used to define weights for the residuals of the regression. The effective damping in steel buildings, with the exception of very tall structures, is found to be larger than the 2% typically used in practice, whereas the 5% assigned to concrete proves to be similar to the mean of the data set.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
