Abstract
This review paper compares ANSI, NEHRP, SEAOC, and UBC. A few essential differences among these documents are as follows: (a) The NEHRP document gives force levels corresponding to a strength-based or limit states design, while the other three documents give force levels that correspond to working or service stress design; (b) the importance factor is used as a multiplier of base shear level in all documents except NEHRP, which treats building importance by a seismic hazard exposure group; (c) NEHRP and UBC-1988 contain detailing requirements for all common construction materials and all seismic zones, while UBC-1985 contains detailing requirements for zones of high seismicity but only limited requirements for zones of moderate seismicity; (d) P-delta analysis is specified by NEHRP for all buildings that must be analyzed, by SEAOC for buildings that exceed drift limits, by UBC-1988 for all buildings except those in Zones 3 and 4 meeting drift limits, and is not specified by ANSI.
Get full access to this article
View all access options for this article.