The sputtering deposition (SPD) technique applicable for infra-red reflecting (IR) film coating on ellipsoidal bulbs of halogen lamps was investigated. To realize a uniform IR layer coating on such bulbs, a specifically designed spin and swing motion mechanism for coating bulbs and a novel monitoring system for controlling the coating layer thickness were developed. The IR film coating produced by the SPD processes is shown to offer a worthwhile energy saving of approximately 17% of the lamp power consumption.
Brett J, Fomtana R, Walsh P, Spura S, Parascandola L, Thouret W, Thorington L.Development of high energy-conserving incandescent lamps. J. of IES1981; July: 214-214.
3.
Bach H, Krause D.Thin films on glass. Heidelberg: Springer, 1997: Chapter 6.
4.
Pulker H.Coating on glass. Amsterdam: Elsevier; 1984.
5.
Bergman R.Application of thin film reflecting coating technology to lamps. Proc. LS-61992; 173-190.
6.
Goldstein L.The design, construction and performance of an incandescent light source with a transparent heat mirror. Lighting Res. Tech.1986; 18: 93-98.
7.
Kawakatsu A.Tungsten halogen lamps with infra-red reflective films. J. Illum. Engng. Inst. Jpn.1985; 69: 537-542.
8.
Flory F.Thin films for optical systems, Part II. New York: Marcel Dekker, Inc., 1995.
9.
Hashimoto N, Fujii K, Omata Y, Suemitsu T, Kitai M, Yokoyama M.The 61st Annual Conference, 3p-C7. The Japan Society of Applied Physics, 1999.
10.
Suzuki S, Kojima T, Shimaoka S, Ikeda H, Fujiwara T, Maeda K.Halogen lamps with infra-red reflective layers, `Multi Layer HE’. National Technical Report1997; 43: 16-22.
