Höganäs Chair is an innovative research collaboration involving Höganäs AB and universities in Spain, Italy and Austria. Progress in the first five years has shown this initiative to be effective in involving young researchers in PM and also in furthering knowledge, not only within the traditional PM industry but also for those involved in other component forming technologies.
Get full access to this article
View all access options for this article.
References
1.
KremelS.: ‘Preparation and properties of chromium prealloyed sintered steels’, PhD thesis, Matr. Nr. 8925959, 2002, TUW, Wien.
2.
CamposM.: ‘New low alloyed Cr—Mo sintered steel: sinterbility, mechanical and tribilogical behaviour, heat and thermochemical treatments’, PhD the-sis, 2002, Carlos Ill University Madrid, Madrid.
3.
PuscasT. Marcu: ‘Sintering, through hardening and thermochemical treat-ments of low alloyed Cr and Mo structural steels’, PhD thesis, Uinversity of Trento, Trento, 2002.
4.
KremelS., DANNINGERH. and vuY.: Proc. Int. Conf. DF PM2002 ‘Deformation and fracture in structural PM materi-als’, Stara Lesna, Slovakia, 2002, IMR-SAS, Vol. 1, 132-142.
5.
KremelS., RAABC. and DANNINGERH.: Proc. EuroPM2001: European Congress and Exhibition on Powder Metallurgy, Nice, October 2001, EPMA, Vol. 1, 52-57.
6.
LindbergC. etal.: ‘Advances in powder metallurgy and particulate materials’, Part 6, 81; 2000, Princeton, NJ, MPIF.
7.
DanningerH., KREMELS., LEITNERG., JAENICKE-ROBLERK. and vuY.: ‘Advances in powder metallurgy and particulate materials’, Part 13, 291-301; 2002, Princeton, NJ, MPIF.
8.
DanningerH., GIERLC., KREMELS., LEITNERG., JAENICKE-ROBLERK. and YuY.: Powder Metall. Progr., 2002, 2, (3), 125–140.
9.
CamposM.; SANCHEZD. and TORRALBAJ. M.: J. Mater. Process. Technol. 2001, 143/144C, 464-469.
10.
CamposM., SANCHEZD., TORRALBAJ. M., KREMELS., PUSCAST. MARCU and vuY.: Mater. Sci. Forum, 2001, 416/418, 82–88
11.
MolinariA., PUSCAST. MARCU and YANGY.: Acta Technic. Napocensis, 2002, 45, 495–500.
12.
DanningerH., KREMELS., MOLINARIA., PUSCAST. MARCU, TORRALBAJ. M., CAMPOSM. and YuY.: Proc. EuroPM2001: European Congress and Exhibition on Powder Metallurgy, Nice, October 2001, EPMA, Vol. 1, 28-33.
13.
PuscasT. Marcu and MOLINARIA.: 7th Eur. Conf. on ‘Advanced materials and processes’, Rimini, June2001.
14.
PuscasT. Marcu, vuY., GRAFENW. and MOLINARIA.: Proc. EuroPM2003: European Congress and Exhibition on Powder Metallurgy, Valencia, Spain.
15.
StoyanovaV. and MOLINARIA.: Internal report, 2004.
16.
MolinariA., MARCUPUSCAST., STRAFFELINIG. and vuY.: ‘Advances in powder metallurgy and particulate engineering’; 2001, Princeton, NJ, MPIF
17.
PuscasT. Marcu, MOLINARIA. and STRAFFELINIG.: Proc. EuroPM2001: European Congress and Exhibition on Powder Metallurgy, Nice, October 2001, EPMA, Vol. 1, 46.
18.
CamposM., BILLAI. and TORRALBAJ. M.: Proc. Euro PM2003: European Congress and Exhibition on Powder Metallurgy, Valencia, 2003, EPMA.
19.
CamposM. and TORRALBAJ. M.: Proc. EuroPM 2001: European Congress and Exhibition on Powder Metallurgy, Nice, October 2001, EPMA.
20.
MolinariA., PUSCAST MARCU, STRAFFELINIG. and YANGVU: ‘Advances in powder metallurgy and particulate materials’; 2002, Princeton, NJ, MPIF.
