Abstract
The elastoplastic finite element method for the deformation of porous metals has been newly formulated using the yield condition advanced by Lee and Kim. Changes in geometries and densities of porous metals, and upsetting loads with upsetting strain have been calculated. The Brinell hardnesses of porous metals with various densities dependent on indenting geometries have been analysed. The calculated results were in very good agreement with the measured data. PM/0632
Get full access to this article
View all access options for this article.
References
1.
Oyane
M.
and
TABAT
T.
J. Jpn Soc. Technol. Plast ., 1974 , 15 , 43 .
2.
Oh
H.-K.
and
LEE
J.-K.
J. Mech. Work. Technol ., 1985 , 11 , 53 .
3.
Im
Y. T.
and
KOBAYASHI
S.
in ‘Finite element analysis of plastic deformation of porous materials’ , (ed.
Reid
S. R.
), 103 ; 1985 , Oxford , Pergamon Press .
4.
Mori
K.
,
SHIMA
S.
, and
OSAKADA
K.
Bull. Jpn Soc. Mech. Eng ., 1980 , 23 , 516 .
5.
Lee
D. N.
and
KIM
H. S.
Powder Metall ., 1992 , 35 , 275 .
6.
Doraivelu
S. M.
,
GEGEL
H. L.
,
GUNASEKERA
J. S.
,
MALAS
J. C.
,
MORGAN
J. T.
, and
THOMAS
J. F.
Int. J. Mech. Sci ., 1984 , 26 , 527 .
7.
Gurson
A. L.
: J. Eng. Mater. Technol. (Trans. ASME) , 1977 , 99 , 2 .
8.
Tvergaard
V.
: Int. J. Fract ., 1982 , 18 , 237 .
9.
Shima
S.
and
OYANE
M.
Int. J. Mech. Sci ., 1976 , 18 , 285 .
10.
Biner
S. B.
and
SPITZIG
W. A.
Acta Metall. Mater ., 1990 , 38 , 603 .
11.
Han
H. N.
,
KIM
H. S.
, and
LEE
D. N.
SCr. Metall. Mater ., 1993 , 29 , 1211 .
12.
Bathe
K.-J.
: ‘Finite element procedures in engineering analysis’ , 388 ; 1982 , Englewood Cliffs, NJ , Prentice-Hall .
13.
Zhdanovich
G. M.
: ‘Theory of compaction of metal powders’ , 1 ; 1969 , OH , Foreign Technology Division, Wright-Patterson AFB .
14.
Kim
K. T.
and
CHO
Y. H.
Powder Metall ., 1993 , 36 , 129 .
15.
Kuhn
H. A.
: in ‘Powder metallurgy processing’ , (ed.
Kuhn
H. A.
and
Lawley
A.
118 ; 1978 , New York , Academic Press .
16.
Tabata
T.
,
MASAKI
S.
, and
YABE
T.
Trans. Jpn Soc. Mech. Eng., 1987, 53, 2029 (in Japanese).
17.
Tabata
T.
and
MASAKI
S.
J. Eng. Mater. Technol. (Trans. ASME) , 1990 , 112 , 95 .
18.
Dieter
G. E.
: ‘Mechanical metallurgy’ , 3rd edn , 326 ; 1986 , New York , McGraw-Hill .