H. DOI: Rev. Deform. Behav. Mater., 1974, (Suppl. 1).
2.
NakamuraM. and GURLANDJ.: Metall. Trans., 1980, 11A, 141.
3.
ChermantJ. L., DESCHANURESA., and IOSTA.: ‘Fracture mechanics of ceramics’, Vol. I, (ed. BradtR. C., LangeF. F., and HasselmanD. P. H.), 346; 1974, New York, Plenum.
4.
ChermantJ. L. and OSTERSTOCKF.: J. Mater. Sc., 1976, 11, 1939:
5.
LuethR. C.: ‘Fracture mechanics of ceramics’, Vol. 2, (ed. R. C. Bradt, F. F. Lange, and D. P. H. Hasselman), 791; 1974, New York, Plenum.
6.
InglestormN. and NORDBERGH.: Eng. Fract. Mech., 1974, 6, 597.
7.
MurrayM. J. and PERROTTC. M.: Proc. 1976 Int. Congr. on ‘Hard materials tool technology’, (ed. KomanduriR.), 266; 1976, Pittsburgh, Pa, Carnegie-Mellon University.
8.
PickensJ. R. and GURLANDJ.: Mater. Sci. Eng., 1978, 33, 135.
9.
RionK.: J. Jpn Soc. Powder Powder Metall., 1965, 12, 23.
10.
FindeisenG.: Z. Metallkd., 1961, 52, 236.
11.
WassermannG.: Z. Metallkd., 1973, 64, 844.
12.
NeussR. and WASSERMANNG.: Z. Metallkd., 1973, 64, 696.
13.
NakamuraM. and TSUYAK.: J. Mater. Sc., 1977, 12, 1463.
14.
NakamuraM. and TSUYAK.: Powder Metall., 1979, 22, 179.
15.
NakamuraM. and TSUYAK.: Powder Metall., 1980, 23, 65.
16.
NakamuraM. and TSUYAK.: Powder Metall., 1979, 22, 101.
17.
PosterA. R. and HAUSNERH. H.: ‘Modern developments in powder metallurgy’, Vol. 2, (ed. Hausner)H. H., 26; 1966, New York, Plenum.
18.
MoiuusonW. B. and MILLERR. L.: ‘Ultrafine grain metals’, (ed. BurkeJ. J. and WeissV.), 183; 1970, Syracuse, NY, Syracuse University Press.
