LusaG., “Differential Gear by P/M Hot Forging”, paper presented at MPIF International Conference (New York, 1970).
5.
MocarskiS. and WinquistL. A., “Manufacture of Magnetically Soft Parts by Hot Re-striking P/M Preforms”, ibid.
6.
AbkovitzS., SiergiesJ. M., and ReganR. D., “Titanium PIM Preforms, Parts and Composites”, ibid.
7.
BrownG. T., and JonesP. K., “Experimental and Practical Aspects of the Powder Forging Process”, ibid.
8.
SquireA., Trans, Amer. Inst. Min. Met. Eng., 1947, 171, 473.
9.
SellorsR. G. R., Powder Met., 1970, 13, (26), 85.
10.
ZapfG., ibid., p. 130.
11.
FischmeisterH. F., ArenB., and EasterlingK. E., ibid., this vol., p. 144.
12.
MarxJ. B., DaviesR., and GuestT. L., “Some Considerations of the Hot Forging of Powder „Preforms”, paper presented at the 11th International MTDR Conference, (Sept. 1970). Oxford &c. (Pergamon Press).
13.
Metalworking Prodn., 1970, 114, (18), 41.
14.
VerniaP., “Short-Time Sintering by Induction Heating”, paper presented at MPIF International Conference (New York, 1970).
15.
JonesP. K., Powder Met., 1970, 13, (26), 114.
16.
HusebyR. A. and ScheilM. A., “Forgings from Powder Preforms”, paper presented at MPIF International Conference (New York, 1970).
17.
SchwartzN. B., Iron Age, 1970, 206, (1), 55.
18.
CullG. W., Powder Met., 1970, 13, (26), 156.
19.
CundillR. T., MarshE., and RidalK. A., ibid., p. 165.
