MECHANICAL PROPERTIES IN RELATION TO DESIGN REQUIREMENTS

Soderberg C. R. , Trans. Amer. Soc. Mech. Eng. , 1930, 52, (APM-2).

Soderberg C. R. , “Handbook of Experimental Stress Analysis” Chapter X, p. 438. 1950: New York (John Wiley and Sons, Inc.); London (Chapman and Hall, Ltd.).

Orowan E. , “Design of Piping Systems”, Chapter I. 1956: New York (John Wiley and Sons, Inc.); London (Chapman and Hall, Ltd.).

Prager W. , Proc. Inst. Mech. Eng. , 1955, 169, (21), 41.

von Mises R. , Naar. Ges. Wiss. Gottingen, Math. physikal. Klasse, 1913, 582.

Nadai A. Wahl A. M. , “Plasticity”. 1931: New York and London (McGraw-Hill).

Hill R. , “The Mathematical Theory of Plasticity”, p. 20. 1950: London (Oxford University Press).

Kazinczy G. , Betonszemle, 2, 68, 83, 101.

Van den Broek J. A. , Trans. Amer. Soc. Civil Eng. , 1940, 105, 638; “Theory of Limit Design”. 1948: New York (John Wiley and Sons, Inc.); London (Chapman and Hall, Ltd.).

Baker J. F. Roderick J. W. , Trans. Inst. Weld., 1938, 1, 206; Proc. Inst. Civil Eng. , 1952, 1, (I), 71.

Baker J. F. Home M. R. Roderick J. W. , Proc. Roy. Soc. , 1949, [A], 198, 493.

Drucker D. C. Greenberg H. J. Prager W. , J. Appl. Mechanics, 1951, 18, 371; see also Quart. Appl. Mechanics, 1952, 9, (4), 381.

Hencky H. , Trans. Amer. Soc. Mech. Eng. , 1933, 55, 151.

Bridgman P. W. , J. Appl. Physics, 1938, 9, 517.

Ludwik P. , “Elemente der technologischen Mechanik”. 1909: Berlin (Julius Springer).

McGregor C. W. , Proc. Amer. Soc. Test. Mat. , 1940, 40, 508; J. Franklin Inst. , 1944, 238, 111, 159.

Bridgman P. W. , “Studies in Large Plastic Flow and Fracture”, Chapter 1. 1952: New York and London (McGraw-Hill).

Sachs G. Lubahn J. D. , Trans. Amer. Soc. Mech. Eng. , 1946, 68, 271.

Considère M. , Ann. Fonts Chaussies, 1885, [vi], 9, 574.

Espey G. , Trans. Amer. Soc. Mech. Eng. , 1946, 68, 281.

Föppl A. Fiippl L. , “Drang und Zwang”, Vol. I, p. 47. 1924: Berlin (R. Oldenbourg).

Battelle Memorial Institute Staff, “Prevention of the Failure of Metals under Repeated Stress”. (Handbook prepared for the IJ.S. Bureau of Aero-nautics, Navy Department). 1941: New York (John Wiley and Sons Inc.); London (Chapman and Hall, Ltd.) .

Cazaud R. , “Fatigue of Metals” (translated from the French by Fenner A. J. ). 1953: London (Chapman and Hall, Ltd.).

Cazaud R. Brit. Engine Boiler Elect. Insurance Co., Ltd., Tech. Rep. , 1954, [N.S.], VOL II.

Weibull W. , Ing. Vetens. Akacl. Handl. , 1939, (151); J. Appl. Mechanics, 1952, 19, 109; Tech. Note SAAB Aircraft Co. , 1954, (30).

McClintock F. A. , J. Appl. Mechanics, 1955, 22, 421, 427; paper presented at Colloquium on Fatigue, Stockholm, 1955.

Orowan E. , Proc. Roy. Soc., 1939, [A], 171, 79; Weld. J. , 1952, 31, 273S.

Timoshenko S. , Proc. Soc. Exper. Stress Analysis, 1954, 12, (1), 1.

Peterson R. E. , “Contributions to the Mechanics of Solids Dedicated to Stephen Timoshenko”, p. 179. 1939: New York and London (Macmillan Co.).

Murphy J. J. Soderberg C. R. , Jr., and D. B. Rossheim, paper presented to the 20th Midyear Meeting of the American Petroleum Institute's Division of Refining, St. Louis, Mo., 1955.

Markl A. R. C. , Trans. Amer. Soc. Mech. Eng. , 1952, 74, 287.

Pomp A. Hempel M. , Mitt. K. W. Inst. Eisenforsch., 1936, 18, 1, 205; 1937, 19, 237.

Caswell J. S. , Engineer, 197, 318, 346, 378.

Gough H. J. Pollard H. V. , Proc. Inst. Mech. Eng. , 1935, 131, 3.

Shank M. E. , U.S. Weld. Research Council Bull. , 1964, (17); also published as U.S. Nat. Research Council Rep. , 1953, (SSC-65).

Griffith A. A. , Phil. Trans. Roy. Soc. , 1920-21, [A], 221, 163; Proc. 1st. Internat. Conf. Appl. Mechanics, Delft, 1924, 55.

Inglis C. E. , Trans. Inst. Naval Architects, 1913, 55, (I), 219.

Orowan E. , Rep. Progress Physics, 1948-49, 12, 185; Symposium on Fatigue and Fracture of Metals (Mass. Inst. Technol.), 1952, 139.

Jaffe L. D. Reed E. L. Mann H. C. , Trans. Amer. Inst. Min. Met. Eng. , 1949, 185, 683.

Shank M. E. , Metal Progress 1955, 67, (6), 111.

Ludwik P. Scheu R. , Stahl is. Eisen, 1923, 43, 999.

Davidenkov N. N. Vitman F. , Tech. Physics U.S.S.R. , 1937, 4, 308.

Orowan E. , Trans. Inst. Eng. Ship. Scotland, 1946, 89, 165.

Robertson T. S. Hunt M. , J. West Scotland Iron Steel Inst. , 1952-53, 60, 259.

Felbeck D. K. Orowan E. , Weld. J. , 1955, 34, 5708.

Feely F. J. Northrup M. S. , paper presented at the 19th Midyear Meeting of the American Petroleum Institute, Houston, Tex., 1954.

Felix W. A. , Sulzer Tech. Rev. , 1954, (1), 33.

Sorensen A. , Inst. Aeronaut. Sci. Preprint No. 618, 1956.

Rankin A. W. Seguin B. R. , Amer. Soc. Mech. Eng., Paper No. 55—A-210.

Emmert H. D. , ibid. , No. 55—A-172.

Winne D. H. et al., ibid., No. 55-A-208.

Peterson R. E. et al., ibid. , No. 55—A-215.

Rankin A. W. Moriarty C. D. , ibid. , No. 55—A-194.

Schaefer A. O. , ibid. , No. 55—A-209.

(Sir) Claude Gibb , Proc. Inst. Mech. Eng. , 1955, 169, (29), 511.

Cross H. C. Simmons W. F. , Utilisation of Heat-Resistant Alloys (Amer Soc. Metals), 1954, 55.

Bailey R. W. , Trans. Amer. Soc. Mech. Eng. , 1954, 76, 309, Proc. Inst. Mech. Eng. , 1954, 168, 470.

Sherby O. D. Dorn J. E. , Proc. Soc. Exper. Stress Analysis, 1954, 12, (1), 139.

Hoff N. J. , J. Aeronaut. Sci. , 1955, 22, 661. Note the bibliography.

Soderberg C. R. , Trans. Amer. Soc. Mech. Eng., 1936, 58, 733; 1941, 63, 737; 1942, 64, 769.

Smith G. V. , “Properties of Metals at Elevated Temperatures”, p. 296. 1950: New York and London (McGraw-Hill).

da E. N. Andrade C. , Proc. Roy. Soc. , 1914, [A], 90, 329.

Grant N. J. Bucklin A. G. , Trans. Amer. Soc. Metals, 1950, 42, 720.

Grant N. J. Monkman F. C. , paper to be published by American Society for Testing Materials