This review, written for the metallurgist who would like to bring up to date his knowledge of temperature measurement, has been so prepared that it can be looked at with three alternative degrees of concentration. First, if the reader has a few minutes to spare, he can look at the photographs and their captions and learn a good deal about new methods and ideas. Secondly, the available methods of measurement are summarized in three tables. Finally, the full story is told in the text.
Get full access to this article
View all access options for this article.
References
1.
“The International Temperature Scale of 1948.”1950: London (H.M. Stationery Office).
2.
HallJ. A.BarberC. R., Brit. J. Appl. Physics, 1960, 1, 81.
3.
“British Standard Code for Temperature Measurement” (B.S.1041).1943: London (British Standards Institution).
4.
“Temperaturmessungen bei Abnalimeversuchen und in der Betriebsiiber-wachung,” (D.I.N. 1953).1953: Berlin (Deutscher Normenausschuss).
5.
BarberC. R., Proc. Phys. Soc., 1950, [B), 88, 492.
6.
“Reference Tables for Nickel—Aluminium/Nickel—Chromium Thermocouples,” (B.S.1827).1952: London (British Standards Institution).
7.
“Reference Tables for Platinum—Rhodium/Platinum Thermocouples,” (B.S. 1826).1952: London (British Standards Institution).
8.
“Reference Tables for Thermocouples,” (N.B.S. Circular 561)1955: Washington D.C. (National Bureau of Standards).
9.
ManterfieldB.CresswellJ. D.HerneH., J. Iron Steel Inst., 1952, 172, 387.
