The effect of stress on transformation is studied through a series of dilation experiments. The results obtained are used to modify models of transformation kinetics, transformation plasticity, and elastoplastic constitutive relations so as to predict residual stresses after quenching. Results of the simulation show that the modified models are fit to predict residual stresses after quenching, which agree well with experimental results if both transformation plasticity and stress induced transformation are taken into account.
Get full access to this article
View all access options for this article.
References
1.
FANGB.: ‘Residual stress of cold and hot work of metals’, (ed. FangB.), 2-10; 1991, Beijing, Advanced Education Publisher.
2.
FLETCHERA. J.: ‘Thermal stress and strain generation in heat treatment’, 1989, New York, Elsevier Applied Science.
3.
DENISS., GAUTIERE., SIMONA., and BECKG.: Mater. Sci. Technol., 1985,1, 805–814.
4.
INOUET. and WANGZ.: Mater. ScL TechnoL, 1985,1, 845–850.
5.
DENISS., SIMONA., and BECKG.: Trans. ISIJ, 1982, 22,504-513.
6.
S. SJÖSTRÖM Mater. Sci. TechnoL, 1985,1,823–829.
7.
MAGEEC. L.: ‘Phase transformation’, 115; 1970, London, Chapman and Hall.
8.
KOISTINEND. P. and MARBURGERR. E.: Acta Metall., 1959, 7, 59.
9.
GREENWOODG. W. and JOHNSONR. H.: PrOC. R. Soc. A, 1965, 283A, 403–422.
10.
LEBLONDJ. B.: Int. J. Plast., 1989,5, 573–591.
11.
LEBLONDJ. B., DEVAUXJ., and DEVAUXJ. C.: Int. J. Plast., 1989, 5, 551–572.
12.
LEBLONDJ. B., MOTTEG., and DEVAUXJ. C.: J. Mech. Phys. Solids, 1986,34, 395–409.
13.
LEBLONDJ. B., MOTTEG., and DEVAUXJ. C.: J. Mech. Phys. Solids, 1986,34, 411–432.
14.
DENISS. and SIMONA.: Metall. Trans. A, 1987, 18A, 1203–1212.
15.
FISCHERF. D.: Acta. Metall., 1990,38, 1535–1548.
16.
ODDYA. S., GOLDAKJ. A., and McDILLJ. M.: Eur. J. Mech. A, Solids, 1990,9, 253–263.
