Abstract
Laser surface alloying and cladding have been used with the aim of producing functionally gradient materials based on the Ti–Al system. A continuous powder feed into a laser generated melt pool produced several fully overlapping layers of increasing Al content. Alloying involved feeding powdered Al onto a near-α Ti alloy substrate. For cladding, powder mixtures of Al and Ti–6Al–4V(wt-%) alloy were used with a Ti substrate of commercial purity. Cladding involving low dilutions provides a better approach to producing several discrete layers of increasing Al content than does alloying which is associated with higher dilutions. Structural and compositional data are reported for samples containing up to four layers having Al contents of up to approximately 34·5 wt-% (48 at.-%).
MST/1913
Get full access to this article
View all access options for this article.