Experiments were carried out to study the temperature dependence of the interfacial shear strength in SCS-6 fibre reinforced Ti–24Al–11Nb (at.-%) composites. The fibre pushout technique was used with a diamond indenter and a high temperature microhardness tester. The interfacial shear strength was found to decrease with increasing temperature.
MST/1893
Get full access to this article
View all access options for this article.
References
1.
BRINDLEYP.: in MRS Symp. Proc. ‘High-temperature ordered intermetallic alloys 2’, (ed. StoloffN. S. et al.), Vol. 81, 351; 1987, Pittsburgh, PA, Materials Research Society.
2.
YANGJ. M. and JENGS. M.: Scr. Metall., 1989, 23, (9), 1559–1564.
3.
COXB. N., DAD1CHAHM. S., JAMESM. R., MARSHALLD. B., MORRISW. L., and SHAWM.: Acta Metall. Mater., 1990, 38, (12), 2425–2433.
4.
YANGC. J., JENGS. M., and YANGJ. M.: Scr. Metall. Mater., 1990, 24, 469–474.
5.
COXB. N.: Acta Metall. Mater., 1990, 38, (12), 2411–2424.
6.
AMATOR.: personal communication, General Electric, Aircraft Engine Division, Cincinnati, OH.
7.
Personal communication, Timet,Cincinnati, OH.
8.
CRANER. L. and KRUKONIOSV. J.Am. Ceram. Soc. Bull., 1975, 54, (2), 184–188.
9.
PIROUZP., MORSCHERG., and CHUNGJ.: in ‘Surfaces and interfaces of ceramic materials’, (ed. DufourL. and MontyC.), 737–760; 1989, Norwell, MA, Kluwer Academic.
10.
NINGX. J. and PIROUZP.: submitted toJ. Mater. Res.
11.
MCELMANJ. A.: in ‘Engineering materials handbook: composites’,Vol. 1, 858–866; 1987, Materials Park, OH, ASM International.
12.
NINGX. J., PIROUZP., LAGERLOFK. D. P., and DiCARLOI.: J. Mater. Res., 1990, 5, 2865.
13.
MARSHALLD. B.: J. Am. Ceram. Soc., 1984, 67, (12), C259—C260.
14.
YANGJ. M. and JENGS.M.: JOM, 1989, (11), 56–59.
15.
SMITHP. R., RHODESC. G., and REVELOSW. C.: in Proc. Coil ‘Interfaces in metal—ceramics composites’, (ed. LinR. Y. et al), 35–58; 1989, Warrendale, PA, The Minerals, Metals and Materials Society.
16.
GRANDED. H., MANDELLJ. F., and HONGK. C.: J. Mater. Sci., 1988,23,311–328.
17.
FABERK. T., ADAVANIS. H., LEEJ. K., and JINNJ. T.: J. Am. Ceram. Soc., 1986, 69, (9), C208—C209.
18.
BALLARINIR. and AHMEDS.: in ‘Interfaces in metal ceramic composites’, (ed. ArsenaultR. J. and TishmanS., Warrendale, PA, TMS-AIME, in press.
19.
WRIGHTP. K., NIMMERR., SMITHG., SENSMEIERM., and BRUNM.: in Proc. Conf. ‘Interfaces in metal—ceramics composites’, (ed. LinR. Y. et al.), 559–581; 1989, Warrendale, PA, The Minerals, Metals and Materials Society.
20.
JENGS. M., KAIW., SHIHC. J., and YANGJ. M.: Mater. SCi. Eng., 1989, A114,189–196.
