A series of highly ductile, high strength steels exhibiting transformation induced plasticity due to retained austenite was developed by varying the carbon content in the range 0·01–0·4 wt-% in 5 wt-%Mn based steel. For up to 0·l%C the mechanical properties are insensitive to cooling rate after intercritical heating, but afurther increase in carbon content causes a large sensitivity to the cooling rate, owing to carbide precipitation occurring during slow cooling. By suppressing this carbide precipitation with water quenching after the intercritical holding, an excellent combination of tensile strength (1580 MN m−2) and uniform elongation (21%) was attained at 0·3%C in this series.
