The relationships between the structure and properties of a Cu–Ni–Si–Cr–Mg alloy are discussed. Possible methods of improving the properties and operating characteristics of semiproducts manufactured from this type of alloy were investigated. It was found that these properties, in particular their stability, depend mainly on the structure of the material, which in turn depends on the thermomechanical treatment. Examples and possible applications are presented.
MST/1436
Get full access to this article
View all access options for this article.
References
1.
Mod. Met.,1979, 32, (7), 22.
2.
RAOP. P., AGRAWALB. K., and RAOA. M.: J. Mater. Sc.,1986, 21, 3759–3766.
3.
AMINK. E., BECKERP. C., and PISCITELLIR. A.: Mater. Sci. Eng., 1981, (49), 173-183.
4.
WESTBROOKJ. H.: in‘Order-disorder transformation in alloys’, (ed. WarlimontH.); 1974, Heidelberg/New York, Springer-Verlag.
5.
STOBRAWAJ. and MISSOLW.: in Proc. 7th Conf. on ‘Solid-state electron microscopy’, Krakow-Krynica, Poland, April 1989, pp. 187-192 (in Polish).
6.
RYSJ. and RDZAWSKIz.: Met. Technol.,1980, 7, (1), 32–35.
BHARGAVAM. K. and BHANS.: Z. Metallkd.,1972, 63, (3), 155–157.
10.
KORBELA., BOCHNIAKW., and PAWELEKA.: Arch. Hutn.,1981, 26, (2). 253–275.
11.
RDZAWSKIZ.: Doctoral thesis, Academy of Mining and Metallurgy, Krakow, Poland, 1977.
12.
RDZAWSKIZ. and STOBRAWAI.: in Proc. 7th Conf. On ‘Solid-state electron microscopy’, Krakow-Krynica, Poland, April 1989, pp. 193-197 (in Polish).
13.
NIKOLAEVA., NOVIKOVA. I., and ROZENBERGW. M.: ‘Chromove bronzy'; 1983, Moscow, Metallurgia.
14.
RDZAWSKIZ. and STOBRAWAJ.: in Proc. 3rd Int. Conf. ‘Metals ‘89’, Zakopane, Poland, May 1989, paper 9.
15.
JOSZTK., STOBRAWAJ., and ZABOROWSKIG.: Met. Technol.,1980, 7, (10), 424–427.
16.
RDZAWSKIZ., ORZECHOWSKIH., and KOWALCZYKJ.: ‘An effect of strain and heat treatment on hardness and electrical conductivitychangesinCu Si3Sn I Cr0,1andCuSi1,8A11,4Co0,45’, Report no. 2881/81, Institute of Non-Ferrous Metals, Gliwice, Poland, 1981 (in Polish).
17.
RDZAWSKIZ. and SADKOWSKIA.: ‘Application of the CuNiSiCrMg alloy for the production of electrodes for welding high-strength- chains for the mining industry’, Report no.4147/88, Institute of Non-Ferrous Metals, Gliwice, Poland, 1988 (in Polish).
18.
GUTKOWSKIB., RDZAWSKIZ., GOLECG., CZUPRYNAZ., and SZPARAA.: ‘Development and choice of a low-sparking alloy for perpetual screws’, Report no. 418/86, Polish Association of Engineers and Technicians of the Metallurgical Industry’, Katowice, Poland, 1987 (in Polish). no. 2.362.80, Institute of Metalworking and Physical Metallurgy of the Academy of Mining and Metallurgy in Cracow, Poland, 1990 (in Polish).
