Test procedures for selected property measurements on metal matrix composite (MMC) materials are examined. The mechanical properties considered are associated with tensile, compressive, bend, impact, fracture toughness, fatigue, and high temperature testing. A brief review is also included of mathematical models designed to predict the mechanical properties of MMCs from a knowledge of the properties of the constituents and their geometry.
CHRISTENSENR. M.: ‘Mechanics of composite materials’, Chap. 2; 1979, New York, John Wiley and Sons.
3.
MORIT. and TANAKAK.: Acta MetalL, 1973, 21, 571–574.
4.
COXH. L.: Br. J. Appl. Phys.,1952, 3, 72–79.
5.
NARDONEV. C. and PREWOK. M.: Scr. Metall.,1986, 20, 43–48.
6.
TAYAM. and ARSENAULTR. J.: Scr. MetalL, 1987, 21, 349–354.
7.
SCHOUTENSJ. E.: in Proc. 5th US Dept of Defense (DOD) Conf. on ‘Metal matrix composites’, Silver Spring, NSW, May, 1983, MMC Information Analysis Center (US DOD), paper 437.
8.
PHILLIPSD. C. and DAVIDGER. W.: Br. Ceram. Trans. J.,1986, 85, 123–130.
9.
PETROVICJ. J. and HOOVERR. C.: J. Mater. Sci., 1987, 22, 517–522.
10.
ANDERSSONC.-H. and WARRENR.: Composites, 1984, 15, (1), 16–24.
11.
OCHIAIS. and OSAMURAK.MetallZ.,1987, 78, (7), 525–532.
12.
RAJENDRANG., ROGERSH. C., and KOCZAKM. J.: Powder MetalL Int., 1986, 18, (6), 397–400.
13.
CHOUT.-W., KELLYA., and OKURAA.: Composites, 1985, 16, (3), 187–206.
14.
MARDIA. P.and T.-W. atm: in ‘International conference on composite materials ICCM-VI’, Vol. 2, 422-430; 1987, London, Elsevier Applied Science.
15.
ROEBUCKB., HAYESD. M., COOPERP. M., MURRAYS. N., and McCARTNEYL. N.: ‘Tensile tests on SiC particulate reinforced alumi-nium metal matrix composite’, Report DMA(D)585, NPL, Teddington, 1987.
16.
ASTMD3552: ‘Test method for tensile properties of fibre-reinforced metal matrix composites’, 1977/1982.
17.
TOWATAS. and YAMADAS.: Trans. Jpn Inst. Met.,1986, 27, (9), 709–716.
18.
KYONOT., HALLI. W., and TAYAM.: J. Mater. Sci., 1986, 21, 4269-4280.
19.
COOKEC. M., CAMMETTJ. T., EYLOND., and SMITHP. R.: Microstruct, Sci., 1982, 10, 221–228.
20.
CURTISP. T.: ‘CRAG test methods for the measurement of the engineering properties of fibre reinforced plastics’, Technical Report 85099, RAE, Farnborough, 1985.
21.
BS18: ‘Method for tensile testing of metals (including aero-space materials)’, 1987.
22.
NUNESJ.: in ‘Failure mechanisms in high performance mater-ials’ (Conf. Proc.), (ed. EarlyJ. G. et al.), 138–146; 1985, Cambridge, Cambridge University Press.
23.
SKINNERA., KOCZAKM. J., and LAWLEYA.: Powder Metall. Int.,1982, 14, (3), 144–147.
24.
BHATTR. and GRIMESH. H.: Metall. Trans.,1982, 13A, 1933–1938.
25.
HACKJ. E., PAGER. A., and LEVERANTG. R.: Metall. Trans.,1984, 15A, 1389–1396.
26.
R.H. and CHOUT.-W.: Metall. Trans.,1985, 16A, 853–864.
27.
McMINNA., PAGER. A., and WEIW.: Metall. Trans.,1987, 18A, 273–281.
28.
NARDONEV. C. and STRIFEJ. R.: J. Mater. Sci., 1987, 22, 592–600.
29.
TSANGARAKISN., ANDREWSB. O., and CAVALLAROC.: J. Compos. Mater.,1987, 21, 481–492.
30.
OPLINGERD. W., PARKERB. S., GHANDIK. R., LAMOTHER., and FOLEYG.: in ‘Recent advances in composites’, (ed. VinsonJ. R. and TayaM., STP 864,532–555; 1985, Philadelphia, PA, ASTM.
31.
CUNNINGHAMM. E., SCHOULTZS. V., and TOTHJ. M., JR: in ‘Recent advances in composites’, (ed. VinsonJ. R. and TayaM., STP 864, 253–262; 1985, Philadelphia, PA, ASTM.
32.
ARSENAULTR. J. and TAYAM.: in ‘International conference on composite materials ICCM-V’ (Conf. Proc.), (ed. HarriganW. C. et al.), 21–36; 1985, New York, AIME.
ASTME111-82: ‘Test method for Young's modulus, tangent modulus and chord modulus’, 1988.
35.
GIROTF., QUENISSETJ. M., NASLAINR., COUTANDB., and MASKET.: in ‘International conference on composite materials ICCM-VI’, Vol. 2, 330-339; 1987, London, Elsevier Applied Science.
36.
NINET. G. and CHELLMAND. J.: Scr. Metall.,1984, 18, 925–928.
37.
ROEBUCKB., GORLEYT. A. E., and McCARTNEYL. N.: ‘Test procedures and standards for mechanical property measure-ments on metal matrix composites’, Report DMA(A)153, NPL, Teddington, 1988.
38.
BAYOUNIIM. A. and sutavM.: in ‘International conference on composite materials ICCM-VI’, Vol. 2, 481-490; 1987, London, Elsevier Applied Science.
39.
WEBSTERD.: Metall. Trans.,1982, 13A, 1511–1519.
40.
ASTMD3410-82: ‘Compressive properties of unidirectional or cross ply fiber—resin composites’, 1982.
41.
WHITNEYJ. M., DANIELI. M., and PIPESR. B.: ‘Experimental mechanics of fibre reinforced composite materials’, Mono-graph No. 4, 1 edn, Society for Experimental Stress, Brookfield Centre, CT, 1982, pp. 175-185.
42.
TIMOSHENKOS.: in ‘Strength of materials — Part II’, 3 edn, 57-59; 1976, New York, R. F. Kreiger.
43.
ULMAND. A. and HENNEKEE.G.: in ‘Composite materials: testing and design’ (Conf. Proc.), (ed. DanielI. M.), STP 787, 323-342; 1982, Philadelphia, PA, ASTM.
44.
FUKUNAGAH. and CODAK.: in ‘Composites ‘86. Recent advances in Japan and the United States’ (Conf. Proc.), (ed. KawataK. et al.), 513–521; 1986, Tokyo, Japanese Institute of Composite Materials.
TIMOSHENKOS.: in ‘Strength of materials — Part II’, 3 edn, 366-374; 1976, New York, R. F. Kreiger.
48.
WHITNEYJ. M. and BROWNINGC. E.: Exp. Mech.,1985, 25, (3), 294–300.
49.
PREWOK. M.: in Proc. Conf. on ‘Mechanical behaviour of metal matrix composites’, Dallas, TX, 1982, AIME, 181-194.
50.
LUHE. Y. and EVANSA. G.: J. Am. Ceram. Soc.,1987,70, (7), 466–469.
51.
PREWOK. M. and BRENNANJ. J.: J. Mater. Sci.,1980, 15, 463–468.
52.
BRENNANJ. J. and PREWOK. M.: J. Mater. Sci., 1982, 17, 2371-2383.
53.
AVESTONJ., COOPERG. A., and KELLYA.: in ‘The properties of fibre composites’ (Conf. Proc.), paper 1, 15; 1971, London, IPC Science and Technology Press.
54.
AVESTONJ. and KELLYA.: J. Mater. Sci.,1973, 8, 352–362.
55.
PARVIZIA., GARRETTK. W., and BAILEYJ. E.: J. Mater. Sci., 1978, 13, 195–201.
McCARTNEYL. N.: Proc. R. Soc.,1987, A409, 329–350.
58.
BUDIANSKYB., HUTCHINSONJ. W., and EVANSA. G.: J. Mech. Phys. Solids, 1986, 34, 167–189.
59.
YOUC. P., THOMPSONA. W., and BERNSTEINI. M.: Scr. Metall.,1987, 21, 181–185.
60.
ROEBUCKB.: J. Mater. Sci. Lett.,1987,6, 1138–1140.
61.
ASTME23: ‘Notched bar impact testing of metallic materials’, 1986.
62.
BS131: ‘Methods for notched bar tests’, 1982.
63.
CROWEC. R., GRAYR. A., and HASSOND. F.: in ‘International conference on composite materials ICCM-V’ (Conf. Proc.), (ed. HarriganW. C. et al.), 843–866; 1985, New York, AIME.
64.
LOGSDENW. A. and LIAWP. K.: Eng. Fract. Mech.,1986, 24, (5), 737–751.
65.
FLOMY. and ARSENAULTR. J.: in ‘International conference on composite materials ICCM-VI’ (Conf. Proc.), Vol. 2, 189-198; 1987, London, Elsevier Applied Science.
66.
ASTME399: ‘Method for plain-strain fracture toughness of metallic materials’, 1983.
67.
ASTME813: ‘Test method for J1,’, 1987.
68.
BS5447: ‘Methods of test for plain strain fracture toughness of metallic materials’, 1977/1987.
69.
ASTMB645: Plane-strain fracture toughness testing of alumi-nium alloys’, 1984.
70.
SOUMELIDISP., QUENISSETJ. M., NASLAINR., and STOLOFFN. S.: J. Mater. Sci., 1986, 21, 895–903.
71.
QUENISSETJ. M., SOUMELIDISP., PAILLERR., NASLAINR., and SROLOFFN. S.: J. Mater. Sci.,1985, 20, 4532–4552.
72.
EVANSJ. T.: Acta Metall., 1986, 34, (10), 2075–2083.
73.
DAVIDSOND. L., WOODR. M. ARRO, HACKJ. E., LEVERANTG. R., and CLOUGHS. P.: in Proc. Conf. on ‘Mechanical behaviour of metal matrix composites’, Dallas, TX, 1982, AIME, 117-142.
74.
ERTURKT., GUPTAV., ARGONA. S., and CORNIEJ. A.: in ‘Inter-national conference on composite materials ICCM-VI’ (Conf. Proc.). Vol. 2, 156-168; 1987, London, Elsevier Applied Science.
75.
PARKY. H., NARAYEND., SCHMERLINGM., and MARCUSH. L.: J. Mater. Sci., 1984, 19, 2239-2245.
76.
MAHLULIKARD. and MARCUSH. L.: Metall. Trans.,1984, 15A, 209–215.
77.
JOHNSONW. S.: in ‘Fatigue of composites’, (ed. Reif-schneiderK. L.); 1987, London, Elsevier Applied Science, (in press).
78.
JOHNSONW. S.: in ‘Damage in composite materials’, (ed. ReifschneiderK. L.), STP 775, 83-102; 1982, Philadelphia, PA, ASTM.
79.
DVORAKG. J. and JOHNSONw. S.: Int. J. Fract.,1980, 16, (6), 585–667.
80.
JOHNSONW. S. and wALLisR. R.: in ‘Composite materials: fatigue and fracture’, (ed. HahnH. T.), STP 907, 161-175; 1986, Philadelphia, PA, ASTM.
81.
SIMONDSR. A.: in ‘Fracture mechanics’, (ed. UnderwoodJ. H. et al.), Vol. 17, STP 905, 136-152; 1986, Philadelphia, PA, ASTM.
82.
NUNESJ., CHINE. S. C., SLEPETZJ. M., and TSANGARAKISN.: in ‘International conference on composite materials ICCM-V’ (Conf. Proc.), (ed. HarriganW. C. et al.), 723-745; 1985, New York, AIME.
83.
WILLIAMSD. R. and FINEM. E.: in ‘International conference on composite materials ICCM-V’ (Conf. Proc.), (ed. HarriganW. C. et al), 639–670; 1985, New York, AIME.
84.
HARRISS. J. and WILKST. E.:in ‘International conference on composite materials ICCM-VI’ (Conf. Proc.), Vol. 2,113–127; 1987, London, Elsevier Applied Science.
85.
HASSOND. F., CROWEC. R., AHEARNJ. S., and COOKED. C.: in ‘Failure mechanisms in high performance materials’ (Proc. Conf.), (ed. EarlyJ. G. et al.), 147–156; 1985, Cambridge, Cambridge University Press.
86.
HAHNH., DIVECHAA. P., LAREP. J., and HERMANR. A.: in ‘Materials technology — an InterAmerican approach’, 231-235; 1968, New York, ASME.
87.
NIEHT. G.: Metall. Trans.,1984, 15A, 139–146.
88.
PHILLIPSW. L.: in ‘Composite materials’ (Conf. Proc.), 567-577; 1978, New York, AIME.
89.
NARDONEV. C. and STRIFEJ. R.: Metall. Trans.,1987, 18A, 109–114.
90.
LILHOLTH. and TAYAM.: in ‘International conference on composite materials ICCM-VI’ (Conf. Proc.), Vol. 2, 234-244; 1987, Amsterdam, Elsevier Applied Science.
91.
PICKENSJ. R., LANGHANT. J., ENGLANDR. O., and LIEBSONM.: Metall. Trans.,1987, 18A, 303–312.
92.
JARRYP., LOUÉW., and BOUVAISTJ.: in ‘International conference on composite materials ICCM-VI’ (Conf. Proc.), Vol. 2, 350-361; 1987, Amsterdam, Elsevier Applied Science.
McLEANM.: in ‘International conference on composite mater-ials ICCM-VP (Conf. Proc.), Vol. 2, 37-51; 1987, Amsterdam, Elsevier Applied Science.
95.
TRUMPERR. L., SHERWOODP. J., and CLIFFORDA. W.: in Proc. Conf. on ‘Materials in aerospace’, London, Apr. 1986, Royal Aeronautical Society, pp. 249-289.
96.
HunR.: ‘The mathematical theory of plasticity’; 1952, Oxford, Clarendon Press.
97.
ADAMSD. F.: ‘Mechanics of composite materials’, (ed. SendeckyjG. P.), Chap. 5; 1974, New York/London, Academic Press.
98.
GARMONGG.: Metall. Trans.,1974, 5A, 2183–2205.
99.
VOGELSANGM., ARSENAULTR. J., and FISHERR. M.: Metall. Trans.,1986, 17A, 379–389.
