Characterisation of interfaces in Al–Zn–Mg alloy reinforced with Sicabo fibres

Abstract

The microstructure of a metal matrix composite consisting of an Al–Zn–Mg alloy reinforced with SiC coated boron fibres has been examined by electron microscopy, electron probe microanalysis, and by optical microscopy. Considerable amounts of Mg₂Si phase were found to be segregated at the fibre/matrix interface. This intermetallic was not formed by a reaction between the fibre and matrix during the fabrication process, a liquid infiltration technique, but as a result of silicon impurities present as contaminants in the melt. It was concluded that the interface phase was precipitated from the metal matrix in the later stages of solidification without any nucleation role being played by the fibre. The Mg₂Si phase appears to be brittle and was present in amounts likely to have a deleterious effect on the strength of the composite.

MST/871