The potential uses of ceramics in gas turbine engines are reviewed in the context of the problems arising from the brittle nature of the materials. Material properties are considered in relation to various turbine components and the themes of reliability and component design. It is concluded that substantial efforts will be required in materials and processes in achieving greater reliability and improved design before ceramics are successfully applied in gas turbines.
BENNETTA.: in ‘Ceramic surfaces and surface treatments’, British ceramic proceeding no. 34, (ed. MorrellR. and NicholasM. G.), 207-217: 1984, Stoke on Trent, British Ceramic Research Association.
3.
NEWLANDB.: Chart. Mech. Eng., Jan. 1986, 28-30.
4.
QUACKENBUSHC. L., NEILJ. T., and numJ. T.: ‘Sintering microstructure and properties of Si3N4 and SiC based structural ceramics’, Report no. 81-GT-220, American Society of Mechanical Engineers, New York, 1981.
5.
QUINNG. D. and SLAVINM. J.: 111 Proc. 23rd Contractors Conf, Dearborn, Mich., Oct. 1985, US Department of Energy.
6.
a E. LLOYD: in ‘Special ceramics4’, (ed. PopperP., 165-172; 1968, Stoke on Trent, British Ceramic Research Association.
7.
TORTIM. L., ALLIEGROR. H., RICHERSOND. W., WASHBURNM. E., and WEAVERG. Q.: Proc. Br. Ceram. Soc.,1973, 22, 129–146.
8.
KATZR. N. and QUINNG. D.: in ‘Progress in nitrogen ceramics’, (ed. RileyF. L.), 491-501; 1983, The Hague, Martinus Nijhoff.
9.
COLLINSJ. F. and GERBYR. W.: J. Met.,1955, 7, (5), 612–615.
10.
MORRELLR.: in ‘Handbook of properties of technical and engineering ceramics’, Part I, ‘An introduction for the engineer and designer’, 105; 1985, London, HMSO.
11.
LEONM. and KITTLP.: J. Mater. Sci., 1985, 20, 3778-3782.
12.
CREYKEw. E. C.: in ‘Materials in engineering applications’, Vol. 1, 134-142; 1979, Reigate, Surrey, Scientific and Technical Press.
13.
LENOEE. M.: in ‘Ceramics for high-performance applications’, Vol. 3, ‘Reliability’, (ed. LenoeE. M. et al.), 3–18; 1983, New York, Plenum Press.
14.
LARICERH. T.: in ‘Emergent process methods for high technology ceramics’, (ed. DavisR. F. et al.), Vol. 17, 571-581; 1984, New York, Plenum Press.
15.
RICHARSOND. W.: ‘Ceramic gas turbine engine demonstration programme’, US Navy Contract no. N00024-76-C-5352, 1979
