Abstract
The internal energy of the surface layer produced by thermochemical processing is determined partly by the residual stresses resulting from surface pretreatment. In this paper are presented the results of an experimental study of how these residual stresses affect the surface layers of ion nitrided and ion titanized tool steels. The distribution of residual stress in the surface layers is discussed.
MST/22
Get full access to this article
View all access options for this article.
References
1.
PhD
E. ROLINSKE
thesis , Warsaw Technical University , 1978 .
2.
WIERZCHON
T.
,
MICHALSKI
T.
, and
KARPINSKE
T.
‘Heat treatment Shanghai ‘83’, (ed.
Bell
T.
, 3.38-3.43; 1984, London, The Metals Society.
3.
Hunts
M.
: J. Appl. Phys., 1973 , 44 , 1489 .
4.
WESTON
G. F.
: ‘Cold cathode glow discharge tubes’ ; 1968 , London , ILIFFE Books .
5.
JARKIEWICZ
A.
,
MORAWSKI
A.
, and
Report
K. SKALSKE
PZL-Warszawa-Okgcie Transportation Equipment Factory , Warsaw , 1984 .
6.
WAISSMAN
L.
II.
and
PHILLIPS
A.
Proc. Soc. Exp. Stress Anal., 1952 , (2 ), 102 .
7.
ROZENDAAL
H. C. F.
, P. F. cowx, and
MITTERMEIJER
E. J.
‘Heat treatment ‘84’ , 31.1-31.15; 1984, London, The Metals Society.
8.
WIERZCHON
T.
: in Proc. 3rd Int. Conf. ‘Carbides, nitrides, borides’, Poznan and Kolobrzeg, Oct. 1984, Poznan Technical University, 279.
9.
BIRGER
I. A.
: ‘Ostatochnye napryazheniya'; 1963, Moscow, Mashgiz .
10.
SHIKAMA
T.
, H. SHINN° , and
FUKUTOMI
M.
:Thin Solid Films , 1983 , 101 , 233 .