Methods for taking into account the effects of stress concentrations in design are described and treatments for analysing fracture and fatigue problems from such regions using fracture-mechanics methods are discussed. Consideration is given to cases when behaviour at the stress concentration remains wholly elastic, and also to cases where yielding occurs. Examples are presented showing the application of fracture-mechanics methods to practical cases representing structural situations.
WOODLEYC. C., BURDEKINF. M., and WELLSA. A.: Br. Weld. J.,1964, 11, (3), 872.
3.
ROOKED. P. and CARTWRIGHTD. J.: ‘Compendium of stress intensity factors’; 1976, London, HMSO.
4.
BUECKNERH. F.: Trans. ASME, 1958, 80, 1225–1230.
5.
LABBENSR. C., HELIOTJ., and PELLISSIER-TANONA.: in ‘Cracks and fracture’, STP 601, 448-470; 1976, Philadelphia, Pa, American Society for Testing and Materials.
6.
DOREM. and BURNSD. J.: J. Pressure Vessel Technol. (Trans. ASME), 1980, 102, 202–211.
7.
BARSOMJ. M. and ROLFES. T.: in ‘Impact testing of metals’, STP 466, 281-302; 1970, Philadelphia, Pa, American Society for Testing and Materials.
8.
MARANDETB. and SANZG.: in ‘Evaluation of toughness of thick medium strength steels’, STP 631, 72-95; 1977, Philadelphia, Pa, American Society for Testing and Materials.
9.
PARISP. C. and ERDOGANF.: J. Basic Eng. (Trans ASME), 1963, 85, 528–534.
10.
TURNERC. E.: in Conf. ‘Fitness for purpose validation of welded constructions’, 1981, Nov., London, The Welding Institute.
11.
NEumaH.: ‘Theory of notch stresses’; 1946, Ann Arbor, Mich., J. W. Edwards.
12.
WELLSA. A.: in ‘Crack propagation’ Symp., 1961, Cranfield, College of Aeronautics and Royal Aeronautical Society.
13.
BURDEKINF. M. and DAWESM. G.: in Conf. ‘Practical use of yielding and linear elastic fracture mechanics’, May 1971, London, Institution of Mechanical Engineers, 28-37.
14.
Published DocumentPD. 6493; 1980, London, British Standards Institute.
15.
BURDEKINF. M.: Proc. Inst. Mech. Eng.,1981, 195, 73–86.
16.
KAMATHM. S.: in Conf. ‘Fitness for purpose validation of welded constructions’, 1981, London, The Welding Institute.
17.
HARRISONR. P., LOOSEMOOREK., and MILNEI.: ‘Assessment of the integrity of structures containing defects’, Report R/H/R6 1976, CEGB Research Division, London, 1980.
18.
KUMARV., GERMANM. D., and SHIHC. F.: ‘An engineering approachforelastic—plasticfractureanalysis’,EPRI—NP-1931, Electric Power Research Institute, Columbus, Ohio, July 1981.
19.
BURDEKINF. M.: Int. J. Mech. Sci.,1982, 24, (4), 197–208.
20.
RICEJ. R.: J. Appl. Mech.,1968, 35, 379–386.
21.
BEGLEYJ. A. and LANDESJ. D.: in ‘Fracture toughness’, STP 514, 1-23; 1972, Philadelphia, Pa, American Society for Testing and Materials.
22.
TURNERC. E.: in ‘Post yield fracture mechanics’, (ed. LatzkoD. G. H.), 23-210; 1979, London, Applied Science.
23.
TURNERC. E.: Philos. Trans. R. Soc., 1981, A299, 73-92.
24.
SUMPTERJ. D. G. and TURNERC. E.: Int. J. Fract.,1976, 12, 861–871.
25.
BURDEKINF. M., COWANA., MILNEI., and TURNERC. E.: in Conf. ‘Fitness for purpose validation of welded constructions’, Nov. 1981, London, The Welding Institute.
26.
BOWIEO. L.: J. Math. Phys.,1956, 35, 60–71.
27.
MADDOXS. J.: Int. J. Fract.,1975, 11, (2), 221–243.
28.
GURNEYT. R.: ‘Theoretical analysis of the influence of toe defects on the fatigue strength of fillet welded joints’, Report 32/1977/E, The Welding Institute. Cambridge, 1977.
29.
SMITHI. J.: ‘Influence of plate thickness on fatigue strength’, Report 3678/2/81, The Welding Institute, Cambridge, May 1981.
30.
AHMETM. T.: MSc thesis, UMIST, 1980.
31.
LIES. T.: PhD thesis, UMIST, 1983.
32.
cnuW. H.: MSc thesis, UMIST, 1984.
33.
BURDEKINF. M.: in Conf. ‘The new Code for design of steel bridges’, March 1980, Cardiff; 1981, London, Granada.
34.
BURDEKINF. M. and LAUK. H. F.: ‘Avoidance of brittle fracture in steel bridges’, Report CIV/DT/BF/1, UMIST, 1984.
35.
UKOSRP: in Conf. ‘Fatigue in offshore structural steels’, Feb. 1981, London, Institution of Civil Engineers.
36.
CHENW. T.- W.: UMIST Transfer Report, privately communicated, 1984.
