The development of texture and plastic anisotropy (γ-value) during the annealing of low-carbon steel is described. The effects of various industrial processing parameters are considered as well as effects of steel chemistry and microstructure. Comparison is made of box-annealing and continuous annealing technologies.
Get full access to this article
View all access options for this article.
References
1.
HuH.: in 'Textures of materials', Proc. 5th Int. Conf., Aachen,1978, (ed. GottsteinG.LiickeK.), Vol. 2,3–20; 1978, Berlin, Springer - Verlag.
2.
AbeH.NagashimaS.HayamiS.NakaokaK.: in 'Textures of materials', Proc. 5th Int. Conf., Aachen, 1978, (ed. GottsteinG.LiickeK.), Vol. 2, 21–35; 1978, Berlin, Springer-Verlag.
MatsuoM.HayamiS.NagashimaS.: Proc. ICSTIS, Suppl.Trans. Iron Steel Inst. Jpn, 1971, 11, (Part 2), 867–871.
18.
GawneD. T.HigginsG. T.: J. Iron Steel Inst., 1971, 209, 562–566.
19.
EveryR. L.HatherlyM.: Texture, 1976,1, 183–194.
20.
MichalakJ. D.Hu:H.unpublished work, cited in Ref. 1.
21.
HutchinsonW. B.SmithC. J. E.WatsonT. W.DillamoreI. L.: in 'Textures in research and practice', (ed. GrewenJ. et al.) , 339–347; 1969, Berlin, Springer-Verlag.
22.
HutchinsonW. B.WatsonT. W.DillamoreI. L.: J. Iron Steel Inst., 1969, 207, 1479–1483.
23.
KuboteraH.NakaokaK.: Proc. Conf. 'Mechanical working and steel processing V', Chicago, Ill., 1967, The Metallurgical Society of AIME.
24.
KarlynD. A.VeithR. W.ForandJ. L.: in 'Mechanical working and steel processing VII', 127–140; 1969, New York, The Metal-lurgical Society of AIME.
25.
TeshimaS.ShimizuM.: in 'Mechanical working of steel II', 279–320; 1964, New York, The Metallurgical Society of AIME.
26.
GoodmanS. R.HuH.: Metall. Trans., 1970, 1, 1629–1640.
ShimizuM.MatsukuraK.TakahashiN.ShinagawaY.: Tetsu-to-Hagang (J. Iron Steel Inst. Jpn), 1964, 50, 2094–2099.
34.
AntoniucciP. L.RicciBittiR.: in 'Textures of materials', Proc. 6th Int. Conf., Tokyo, 1981, 839–845; 1981, Tokyo, Iron and Steel Institute of Japan.
35.
LebrunJ. L.MaederG.ParnièreP.: in 'Textures of materials', Proc. 6th Int. Conf., Tokyo, 1981, 787–796; 1981, Tokyo, Iron and Steel Institute of Japan.
36.
MouldP.: in 'Metallurgy of continuous-annealed sheet steel', (ed. BramfittB. L.MangononP. L.), 3–33; 1982, Warrendale, Pa, The Metallurgical Society of AIME.,
37.
DillamoreI. L.: unpublished work, cited in HortaR. M.WilsonD. V.RobertsW. T.: J. Iron Steel Inst., 1972, 210, 42–51.
38.
RickettR. L.KahnS. H.MacKenzieJ. T.: Trans. AIME, 1949, 185, 242–251.
MeyzaudY.MichautB.ParniereP.: in 'Texture and the properties of materials', Proc. 4th Int. Conf., Cambridge, 1975, (ed. DaviesG. J. et al.), 255–264; 1976, London, The Metals Society.
44.
RichardsP. N.: J. Austr. Inst. Met., 1967, 12, 2–9.
DugganB. J.HutchinsonW. B.: in Texture and the properties of materials', Proc. 4th Int. Conf., Cambridge, 1975, (ed. DaviesG. J. et al.), 292–303; 1976, London, The Metals Society.
MatsuoM.HayakawaH.HayamiS.: in Textures of Materials', Proc. 5th Int. Conf, Aachen, 1978, (ed. GottsteinG.LiickeK.), Vol. 2, 275–284; 1978, Berlin, Springer-Verlag.
58.
AbeH.SuzukiT.TakagiK.: Trans. Iron Steel Inst. Jpn, 1981, 21, 10–108.
59.
LavigneJ. J.SuzukiT.AbeH.: in 'Textures of materials', Proc, 6th Int. Conf., Tokyo, 1981, 749–758; 1981, Tokyo, Iron and Steel Institute of Japan.
60.
SuzukiT.AbeH.: in 'Textures of materials', Proc. 6th Int. ConL, Tokyo, 1981, 797–806; 1981, Tokyo, Iron and Steel Institute of Japan.
61.
OkamotoA.TakahashiM.: in 'Textures of materials', Proc. 6th Int. Conl., Tokyo, 1981, 739–748; 1981, Tokyo, Iron and Steel Institute of Japan.
62.
OnoS.NozoeO.ShimomuraT.MatsudoK.: in 'Metallurgy of continuous- annealed sheet steel', (ed. BramfittB. L.MangononP. L.), 99–115; 1982, Warrendale, Pa, The Metallurgical Society of AIME.
LeslieW. C.PlecityF. J.MichalakJ. T.: Trans. AIME, 1961, 221, 691–700.
67.
TakahashiM.OkamotoA.Ino,S..
68.
TakahashiM.OkamotoA.: Trans. Iron Steel Inst. Jpn, 1979, 19, 391–400.
69.
TakahashiN. et al.: in 'Metallurgy of continuous -annealed sheet steel', (ed. BramfittB. L.MangononP. L.), 133–153; 1982, Warrendale, Pa, The Metallurgical Society of AIME.
TakahashiN.AbeM.AkisueO.KatohH.: in 'Metallurgy of continuous-annealed sheet steel', (ed. BramfittB. L.MangononP. L.), 51–81; 1982, Warrendale, Pa, The Metallurgical Society of AIME.
74.
TagashiraK.HutchinsonW. B.DillamoreI. L.: in 'Textures of Materials', Proc. 6th Int. ConL, Tokyo, 1981, 778-786; 1981, Tokyo, Iron and Steel Institute of Japan.
75.
HuH.: Metall. Trans., 1977, 8A, 1567–1575.
76.
HutchinsonW. B.: Met. Sc., 1974,8, 185–196.
77.
LeslieW. C.MichalakJ. T.AulF. W.: 'Iron and its dilute solid solutions', 119–212; 1961, New York, Interscience.
78.
YoshidaH.SasakiK.KanzakiF.: Proc. 3rd IDDRG Biennial Colloq., London1964, International Deep Drawing Research Group.
79.
WacquezW. A.DaeleR. van: Paper pre-sented at Discussion on 'Mechanical aniso-tropy in sheet metals', London, March1965, Institute of Metals; summarized in J. Inst. Met., 1964- 65,93, 486–488.
80.
HuH.: Texture, 1976, 2, 113–142.
81.
MatsudoK. et al.: in 'Textures of materials', Proc. 6th Int. Conf., Tokyo, 1981, 759–768; 1981, Tokyo, Iron and Steel Institute of Japan.
82.
KonishiM.YasudaA.SakataK.IrieT.: Trans. Iron Steel Inst. Jpn, 1981, 21,B191.
EliasJ. A.HookR. E.: in 'Mechanical working and steel processing IX', 348–368; 1970, New York, The Metallurgical Society of AIME.
85.
GoodenowR. H.HeldJ. F.: Metall. Trans., 1970, 1, 2507–2515.
86.
HughesI. F.HuddR. C.: British Patent1236598, 1971.
87.
MessienP.GredayT.: in 'Texture and the properties of materials', Proc. 4th Int. Conf.' Cambridge, 1975, (ed. DaviesG. J. et al.), 266–274; 1976, London, The Metals Society.
88.
MeyzaudY.ParniereP.ThomasB. J.TixierR. : in 'Textures of materials', Proc. 5th Int. Conf., Aachen, 1978, (ed. GottsteinG.LiickeK.), Vol. 2, 243–253; 1978, Berlin, Springer-Verlag.
89.
GillandersR.DasarathyC.HuddR. C.: in 'Texture and the properties of materials', Proc. 4th Int. Conf., Cambridge, 1975, (ed. DaviesG. J. et al.), 245–254; 1976, London, The Metals Society.
90.
MouldP.GrayJ. M.: Metall. Trans., 1972, 3, 3121–3132.
91.
HutchinsonW. B.: unpublished work, cited byDugganB. J.in discussion of paper byWillisD. J.HatherlyM.: in 'Texture and the properties of materials', Proc. 4th Int. Conf., Cambridge, 1975, (ed. DaviesG. J. et al.), 53; 1976, London, The Metals Society.
