Modifying wood with bio-polyesters: Analysis and performance

Abstract

Oligomers of lactic and glycolic acid (OLA, OGA) and poly(butylene succinate/adipate) (OBS, OBA) were impregnated and heated into wood for dimensional stabilisation. These bio-polyesters variously provide bulking and lumen filling treatments. Solvent extraction of treated wood showed that ca. 50% of the polymer remains in wood with in situ polymerisation evidenced by GPC. OGA readily penetrates the wood cell wall, which occurred only on heating OLA, whereas OBS/OBA was lumen filling with any cell wall penetration only evident after water soaking. Stability of OLA/OGA treated wood was improved, but did not withstand extended leaching, whereas OBS/OBA treated wood presented higher stability once leached. Bending resistance was influenced by OLA/OGA treatments, but original MOE values were recovered after leaching. Overall, the results show the bio-polyester treatment can confer specific properties of the modified wood to suit selected end use applications.

Keywords

Bio-polymers Dimensional stabilisation Poly(butylene adipate)Poly(butylene succinate)Poly(glycolic acid)Poly(lactic acid)Wood modification

Get full access to this article

View all access options for this article.

References

Beall

. 1971. Differential calometric analysis of wood and wood components. Wood Science and Technology, 5, pp. 159–75.

Beall

. 1972. Introduction to thermal analysis in the combustion of wood. Wood Science, 5, pp. 102–108.

Boonstra

et al. 2006. Microstructural and physical aspects of heat treated wood. Part 1. Softwoods. Maderas: Ciencia y Tecnologia, 8, pp. 193–208.

Boonstra

et al. 2006. Microstructural and physical aspects of heat treated wood. Part 2. Hardwoods. Maderas: Ciencia y Tecnologia, 8, pp. 209–17.

Evans

. 2003. Emerging technologies in wood protection. Forest Products Journal, 53 (1), pp. 14–22.

Ibach

and Ellis

. 2005. Lumen modifications. In: Handbook of wood chemistry and wood composites. Boca Raton, FL: CRC press. p. 15.

Hill

CAS

and Mallon

. 1998. The chemical modification of Scots pine with succinic anhydride or octenyl succinic anhydride. I. Dimensional stabilisation. Holzforschung, 52, pp. 427–33.

Hill

CAS

and Jones

. 1999. Dimensional changes in Corsican pine sapwood due to chemical modification with linear chain anhydrides. Holzforschung, 53, pp. 267–71.

Lande

, Westin

and Schneider

. 2004. Eco-efficient wood protection: furfurylated wood as alternative to traditional wood preservation. Management of Environmental Quality and International Journal, 15 (5), pp. 529–40.

10.

Noël

et al. 2009a. Lactic acid/wood based composite material. Part 1: Synthesis and characterization. Bioresource Technology, 100 (20), pp. 4711–16.

11.

Noël

et al. 2009b. Lactic acid/wood based composite material. Part 2: Physical and mechanical performance. Bioresource Technology, 100 (20), pp. 4717–22.

12.

Noël

, Grigsby

and Volkmer

. 2014. Evaluating the extent of bio-polyester polymerization in wood by thermogravimetric analysis. in J. Wood Chem. Technol, DOI: 10.1080/02773813.2014.962154.

13.

Papadopoulos

, Hill

CAS

and Gkaraveli

. 2004. Analysis of the swelling behaviour of chemically modified softwood: a novel approach. Holz als Roh- und Werkstoff, 62, pp. 107–12.

14.

Rowell

. 2005a. Moisture properties. In: Handbook of wood chemistry and wood composites. Boca Raton, FL: Taylor and Francis. p. 4.

15.

Rowell

., 2005b. Chemical modification of wood. In: Handbook of wood chemistry and wood composites. Boca Raton, FL: Taylor and Francis. p. 14.

16.

Rowell

, Pettersen

and Tshabalala

. 2012. Cell wall chemistry, in: Handbook of wood chemistry and wood composites. 2nd ed. Boca Raton, FL: Taylor and Francis.

17.

Schultz

, Nicholas

and Preston

. 2007. A brief review of the past, present and future of wood preservation. Pest Management Science, 63 (8), pp. 784–88.

18.

Thybring

. 2013. The decay resistance of modified wood influenced by moisture exclusion and swelling reduction. International Biodeterioration and Biodegradation, 82, pp. 87–95.

19.

Xie

et al. 2005. Weathering of wood modified with the N-methylol compound 1, 3-dimethylol-4,5-dihydroxyethyleneurea. Polym. Degrad. Stab. 89, pp. 189–99.