The present study was conducted to investigate the influence of heat treatment temperature and duration on the dimensional stability of chir pine (Pinus roxburghii Sarg.) and mango (Mangifera indica L.) wood. For this purpose, wood was heated at different temperatures for periods of 4, 8 and 12 h in an inert atmosphere. Differential responses of both wood species to different parameters, namely, volumetric swelling and shrinkage, water absorption and equilibrium moisture content (EMC) at different relative humidities, were observed. Results revealed that increase of heat treatment temperature in conjunction with time leads to a significant drop in the shrinkage of mango wood, whereas a reverse trend prevailed in chir pine until 210°C for 12 h treatment. Least values of EMC were recorded for chir pine and mango wood treated at 190 and 210°C for 4 h respectively. Further, increase in temperature and/or time of treatment significantly decreased the water absorption capacity of mango wood.
AhmeedSA, and MorenT. 2012. Moisture properties of heat treated scots pine and Norway spruce sapwood impregnated with wood preservatives.Wood Fiber Sci. 44(1): 85–93.
2.
AkyildizMH, and AtesS. 2008. Effect of heat treatment on equilibrium moisture content (EMC) of some wood species in Turkey.Res. J. Agric. Biol. Sci. 4(6): 660–665.
3.
BekhtaP, and NiemzP. 2003. Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood.Holzforschung57(5): 539–546.
4.
BhuiyanT, and HiraiN. 2000. Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions.J. Wood Sci. 46: 431–436.
5.
BoonstraM, and TjeerdsmaB. 2006. Chemical analysis of heat treated softwoods.Holz Roh-Werkst64(3), 204–211.
6.
BoonstraMJ, RijsdijkJF, SanderC, KegelE, TjeerdsmaBF, MilitzH, van AckerJ, and StevensM. 2006. Microstructural and physical aspects of heat-treated wood. Part 1. Softwoods. Maderas: Cienc.Tecnol. 8: 193–208.
7.
CaiJ, and CaiL. 2012. Effect of thermal modification on mechanical and swelling properties and colour changes of lumber killed by mountain pine beetle.Bioresources7(3): 3488–3499.
8.
CharaniPR, RovshandehJM, MohebbyB, and RamezaniO. 2007. Influence of hydrothermal treatment on dimensional stability of beech wood.Caspian J. Environ. Sci. 5(2): 125–131.
9.
EstevesB, Velez MarquesA, DomingosI, and PereiraH. 2007a. Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood.Wood Sci. Technol. 41: 193–207.
10.
EstevesB, DomingosI, and PereiraH. 2007b. Improvement of technological quality of eucalypt wood by heat treatment in air at 170–200°C.Forest Prod. J. 57(1/2): 47–52.
11.
EstevesB, VideiraR, and PereiraH. 2011. Chemistry and ecotoxicity of heat-treated pine wood extractives.Wood Sci Technol. 45: 661–676.
12.
HillisWE. 1984. High temperature and chemical effects on wood stability. I. General considerations.Wood Sci. Technol. 18(4): 281–293.
13.
IS:1708. 1986. Methods of testing of small clear specimens of timber. Bureau of Indian Standards, New Delhi, India.
14.
JamsaS, and ViitaniemiP. 2001. Heat treatment of wood – better durability without chemicals. Proc. Special Sem. ‘Review on heat treatments of wood’. Antibes, France. February 2001. Office for Official Publications of the EC, pp. 13–22.
15.
JimenezJP, AcdaMN, RazalRA, and MadambaPS. 2011. Physico-mechanical properties and durability of thermally modified mailapapaya (Polyscias nodosa (blume) Seem.) wood.Philip. J. Sci. 140(1): 13–23.
16.
Johansson, D., Sehlstedt-Persson, M., and Morén, T. 2006. Effect of Heat treatment on Capillary Water Absorption of Heat-Treated Pine, Spruce and Birch. In: Proc. of the 5th IUFRO Symposium ‘Wood Structure and Properties 06’, Sliak, Slovakia, 3–6 September, pp. 251–255.
17.
KamdemDP, PizziA, and JermennaudA. 2002. Durability of heat-treated wood.Holz Roh Werkst. 60: 1–6.
18.
KarlssonO, SidorovaE, and MorenT. 2011. Influence of heat transferring media on durability of thermally modified wood.Bioresources6(1): 356–372.
19.
KartalSN, HwangWJ, and ImamuraY. 2007. Water absorption of boron-treated and heat-modified wood.J. Wood Sci. 53: 454–457.
20.
KollmannF, and SchneiderA. 1963. Uber dass Sorptionsverhalten warmebehandelter holzer.Holz Roh Werkst. 41: 87–94.
21.
KorkutDS, KorkutS. BekarI., BudakciM., DilikT., and CakicierN.2008. The effect of heat treatment on the physical properties and surface roughness of Turkish hazel (Corylus colurna L.) wood.Int. J. Mol. Sci. 9: 1772–1783.
22.
Metsä-KortelainenS, AntikainenT, and ViitaniemiP. 2006. The water absorption of sapwood and heartwood of Scots pine and Norway spruce heat-treated at 170°C, 190°C, 210°C and 230°C.Holz Roh Werkst. 64(3): 192–197.
23.
MilitzH. 2002. Thermal treatment of wood: European processes and their background. International Research Group on Wood Preservation, Stockholm, Sweden. Section 4-Processes Doc. No. IRG/WP 02-40241.
24.
MohebbyB, and SanaeiI. 2005. Influences of the hydro-thermal treatment on physical properties of beech wood (Fagus orientalis). International Research Group on Wood Preservation, Stockholm, Sweden. Doc. No. IRG/WP 05-40303.
25.
Nuopponen, M. 2005. FT-IR and UV Raman spectroscopic studies on thermal modification of Scots pine wood and its extractable compounds. Doctoral thesis, Helsinki University of Technology, Finland.
26.
NuopponenM, VuorinenT, JamsaS, and ViitaniemiP. 2004. Thermal modifications in softwood studied by FT-IR and UV resonance Raman spectroscopies.J. Wood Chem. Technol. 24: 13–26
27.
NuopponenM, VuorinenT, JamsaS, and ViitaniemiP. 2003. The effects of a heat treatment on the behavior of extractives in softwood studied by FTIR spectroscopic methods.Wood Sci. Technol. 37: 109–115.
28.
OliveiraRM, BrisolariA, SalesA, and GoncalvesD. 2010. Wettability, shrinkage and color changes of Araucaria augustifolia after heat treatment.Mater. Res. 13(3): 351–354.
29.
PandayCN, and JainVK. 1992. Seasoning behavior of some Indian timbers and their shrinkage. Wood Seasoning Technology. FRI-ICFRE. ICFRE, Dehradun, India. 130–133.
30.
SivonenH, MaunuS, SundholmF, JamsaS, and ViitaniemiP. 2002. Magnetic resonance studies of thermally modified wood.Holzforschung56: 648–654.
31.
TAPPI. 2002. Equilibrium relative humidities over saturated salt solutions. TAPPI, Peachtree Corners, GA, USA. TAPPI Standard TIP 0808-3.
32.
TjeerdsmaBF, BoonstraM, and MilitzH. 1998a. Thermal modification of non-durable wood species. 2. Improved wood properties of thermally treated wood. International Research Group on Wood Preservation, Stockholm, Sweden. Document no. IRG/WP 98-40124.
33.
TjeeedsmaB, BoonstraM, PizziA, TekelyP, and MilitzH. 1998b. Characterization of thermally modified wood: molecular reasons for wood performance improvement.Holz Roh Werkst. 56(3): 149–153.
34.
TjeerdsmaB, StevensM, MilitzH, and van AckerJ. 2002. Effect of process conditions on moisture content and decay resistance of hydro-thermally treated wood, Holz Holzverwert. 5: 94–99.
35.
TjeerdsmaBF, and MilitzH. 2005. Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood.Eur. J. Wood Wood Prod. 63(2): 102–111.
36.
VernoisM. 2001. Heat treatment of wood in France-state of the art. Proc. Special Sem. ‘Review on heat treatments of wood’. Antibes, France. February 2001. Office for Official Publications of the EC, pp. 35–42.
37.
ViitaniemiP, and JamsaS. 1994. Modification of wood with heat treatment. VTT, Espoo, Finland. VTT Research Report Publications 814.
38.
WangaardFF, and GranadosLA. 1967. The effect of extractives on water-vapor sorption by wood.Wood Sci. Technol. 1: 253–277.
39.
Weiland, J. J., and Guyonnet, R. 2003. Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy. Holz als Rohund Werkstoff. 61: 216–220.
40.
WikbergH, and MaunuS. 2004. Characterisation of thermally modified hard and soft woods by 13CCPMAS NMR.Carbohydr. Polym. 58: 461–466.
