In this paper an approach is proposed to account for Generalised Newtonian lubrication flow in a lubricated bearing geometry. The approximate approach solves the lubricant viscosity accross the lubricated gap, the coefficients in the equation describing the viscosity across the gap are then solved for iteratively. This permits an approximation of the lubrication equation to be arrived at which considers the Poiseuille components of the flow as well as the Couette terms. The reduction in error of around 30–40% is observed in the bearing pressure field for the cases considered here.
BanksWH, MillCC: ‘Some observations on the behaviour of liquids between rotating rollers’, Proceed. Royal Soc. Lond. A, 1954, 223A, 414.
4.
ReynoldsO: ‘On the theory of lubrication and its application to mr beauchamp tower's experiment, including an experimental determination of the viscosity of olive oil’, Philos. Trans. Royal Soc. Lond., 1886, 177, 157–234.
5.
DowsonD: ‘A generalised reynolds equation for fluid film lubrication’, Int. J. Mech. Sci., 1962, 4, 159–170.
6.
CoyleDJ, MacoskoCW, ScrivenLE: ‘Film-splitting flows of shear-thinning liquids in forward roll coating’, AICHE J., 1987, 33, (5), 741–746.
7.
CoyleDJ, MacoskoCW, ScrivenLE: ‘Reverse roll coating of non-Newtonian liquids’, J. Rheol., 1990, 34, (5), 615–636.
8.
JohnsonMW, MangkoesoebrotoS: ‘Analysis of lubrication theory for the power law fluid’, J. Tribol. Trans. Asme, 1993, 115, (1), 71–77.
9.
TaylorRI, BrownMA, ThompsonDM, BellJC: ‘The influence of lubricant rheology on fricion in the piston ring pack’, SAE paper 941981, 1994.
10.
TianT, WongVW, HeywoodJB: ‘A piston ring-pack film thickness and friction model for multigrade oils and rough surfaces’, SAE paper 962032, 1996.
11.
DasNC: ‘A study of optimum load capacity of slider bearings lubricated with power law fluids’, Tribol. Int., 1999, 32, (8), 435–441.
12.
TaylorRI: ‘The inclusion of lubricant shear thinning in the short bearing approximation’, Proceed. Inst. Mech. Eng. J: J. Eng. Tribol., 1999, 213, (J1), 35–46.