Combining theoretical and experimental methods, the effects of 5 vol.-% WC dopant on the microstructure evolution, sintering behaviour and mechanical properties of ZrC ceramics were investigated. WC dopant was found to improve the high temperature elastic modulus and bending strength of ZrC ceramics. Both calculations and experimental results showed that the formation of (Zr, W)C solid solution promote dissolution of the impurity oxygen from the starting powder into the lattice sites, resulting in less oxygen defects in grain boundaries. Internal friction curve can also conform that the ZrC ceramics doped with WC have cleaner grain boundaries, which improved higher elastic modulus and bending strength in WC doped ZrC ceramics at elevated temperature.
OpekaM. M., TalmyI. G., WuchinaE. J., ZaykoskiJ. A. and CauseyS. J.: ‘Mechanical, thermal, and oxidation properties of refractory hafnium and zirconium compounds’, J. Eur. Ceram. Soc., 1999, 19, (13–14), 2405–2414.
2.
TaoX. Y., WeiX. Y., ChenQ., LuW. Z., MaM. and ZhaoT.: ‘Synthesis, characterisation and thermal behaviour of new preceramic polymers for zirconium carbide’, Adv. Appl. Ceram., 2013, 112, (5), 301–305.
3.
ShenX. T., LiK. Z., LiH. J., LanF. T. and FengT.: ‘Effect of ZrO2 from the oxidation of ZrC on ablation of ZrC modified carbon/carbon composites’, J. Inorg. Mater., 2009, 24, (5), 943–947.
4.
ShabalinI. L., WangY., KrynkinA. V., UmnovaO. V., VishnyakovV. M., ShabalinL. I. and ChurkinV. K.: ‘Physicomechanical properties of ultrahigh temperature heteromodulus ceramics based on group 4 transition metal carbides’, Adv. Appl. Ceram., 2010, 109, (7), 405–415.
5.
GossetD., DolleM., SimeoneD., BaldinozziG. and ThomeL.: ‘Structural evolution of zirconium carbide under ion irradiation’, J. Nucl. Mater., 2008, 3739, (1–3), 123–129.
6.
KatohY., VasudevamurthyG., NozawaT. and SneadL. L.: ‘Properties of zirconium carbide for nuclear fuel applications’, J. Nucl. Mater., 2013, 441, (1–3), 718–742.
7.
WangX. G., ZhangG. J., XueJ. X., TangY., HuangX., XuC. M. and WangP. L.: ‘Reactive hot pressing of ZrC–SiC ceramics at low temperature’, J. Am. Ceram. Soc., 2013, 96, (1), 32–36.
8.
WangX. G., ZhangG. J., ZhaoJ., XueJ. X., XuC. M. and WangP. L.: ‘High-strength ZrC ceramics doped with aluminum’, J. Am. Ceram. Soc., 2014, 97, (11), 3367–3370.
9.
LeeD. W. and HaggertyJ. S.: ‘Plasticity and creep in single crystals of zirconium carbide’, J. Am. Ceram. Soc., 1969, 52, (12), 641–647.
10.
LeipoldM. H. and NielsenT. H.: ‘Mechanical properties of hot-pressed zirconium carbide tested to 2600°C’, J. Am. Ceram. Soc., 1964, 47, (9), 419–424.
11.
TanL., SridharanK., AllenT. R., NanstadR. K. and McClintockD. A.: ‘Microstructure tailoring for property improvements by grain boundary engineering’, J. Nucl. Mater., 2008, 374, (1–2), 270–280.
JayaseelanD. D., WangY., HilmasG. E., FahrenholtzW., BrownP. and LeeW. E.: ‘TEM investigation of hot pressed-10 vol.% SiC–ZrB2 composite’, Adv. Appl. Ceram., 2011, 110, (1), 1–7.
14.
TakeuchiS.: ‘Solid-solution strengthening in single crystals of iron alloys’, J. Phys. Soc. Jpn, 1969, 27, (4), 929.
15.
HeS. M., ZengX. Q., PengL. M., GaoX., NieJ. F. and DingW. J.: ‘Microstructure and strengthening mechanism of high strength Mg–10Gd–2Y–0.5Zr alloy’, J. Alloys Compd, 2007, 427, (1–2), 316–323.
16.
LoehmanE. C. R., DummH. P., KotulaP. and TandonR.: ‘Ultra high temperature ceramics for hypersonic vehicle applications’, Sandia Report Sand 2006–2925. Albuquerque, NM; 2006.
17.
ZouJ., ZhangG. J., HuC. f., NishimuraT., SakkaY., VleugelsJ., BiestO. and MonteverdeF.: ‘Strong ZrB2–SiC–WC ceramics at 1600°C’, J. Am. Ceram. Soc., 2012, 95, (3), 874–878.
18.
ZouJ., ZhangG. J., HuC. F., NishimuraT., SakkaY., TanakaH., VleugelsJ. and Van der BiestO.: ‘High-temperature bending strength, internal friction and stiffness of ZrB2–20vol% SiC ceramics’, J. Eur. Ceram. Soc., 2012, 32, (10), 2519–2527.
19.
Kuz'maY. B., FedorovT. F. and ShvetsÉ. A.: ‘Phase equilibria in the system Zr-W-C’, Soviet Powder Metall. Met. Ceram., 1965, 4, (2), 106–109.
20.
ZouJ., SunS. -K., ZhangG. -J., KanY. -M., WangP. -L. and OhjiT.: ‘Chemical reactions, anisotropic grain growth and sintering mechanisms of self-reinforced ZrB2–SiC doped with WC’, J. Am. Ceram. Soc., 2011, 94, (5), 1575–1583.
21.
WangX. G., LiuJ. X., KanY. M. and ZhangG. J.: ‘Effect of solid solution formation on densification of hot-pressed ZrC ceramics with MC (M = V, Nb, and Ta) additions’, J. Eur. Ceram. Soc., 2012, 32, (8), 1795–1802.
22.
EvansA. G. and CharlesE. A.: ‘Fracture toughness determinations by indentation’, J. Am. Ceram. Soc., 1976, 59, (7–8), 371–372.
23.
HeL. F., LuX. P., BaoY. W., WangJ. Y. and ZhouY. C.: ‘High-temperature internal friction, stiffness and strength of Zr–Al(Si)–C ceramics’, Scr. Mater., 2009, 61, (1), 60–63.
24.
ZhangS. C., HilmasG. E. and FahrenholtzW. G.: ‘Zirconium carbide–tungsten cermets prepared by in situ reaction sintering’, J. Am. Ceram. Soc., 2007, 90, (6), 1930–1933.
25.
WangX. G., GuoW. M. and ZhangG. J.: ‘Pressureless sintering mechanism and microstructure of ZrB2–SiC ceramics doped with boron’, Scr. Mater., 2009, 61, (2), 177–180.
26.
SongG. M., WangY. J. and ZhouY.: ‘The mechanical and thermophysical properties of ZrC/W composites at elevated temperature’, Mater. Sci. Eng. A, 2002, A334, (1–2), 223–232.
27.
BassaniM., SantagataE., BaglieriO., FerrarisM., SalvoM. and VentrellaA.: ‘Use of vitrified bottom ashes of municipal solid waste incinerators in bituminous mixtures in substitution of natural sands’, Adv. Appl. Ceram., 2009, 108, (1), 33–43.
28.
NowickA. S. and BerryB. S.: ‘Anelastic relaxation in crystalline solids’, 1972, Academic Press.
29.
PezzottiG., KleebeH. -J., OkamotoK. and OtaK. i.: ‘Structure and viscosity of grain boundary in high-purity SiAlON ceramics’, J. Am. Ceram. Soc., 2000, 83, (10), 2549–2555.
30.
SchallerR.: ‘Mechanical spectroscopy of the high-temperature brittle-to-ductile transition in ceramics and cermets’, J. Alloys Compd, 2000, 310, (1–2), 7–15.
31.
WellerM., HerzogR., KiloM., BorchardtG., WeberS. and ScherrerS.: ‘Oxygen mobility in yttria-doped zirconia studied by internal friction, electrical conductivity and tracer diffusion experiments’, Solid State Ionics, 2004, 175, (1–4), 409–413.
32.
HeL. F., BaoY. W., WangJ. Y., LiM. S. and ZhouY. C.: ‘Microstructure and mechanical and thermal properties of ternary carbides in Hf–Al–C system’, Acta Mater., 2009, 57, (9), 2765–2774.
33.
RoineH. S. C.: ‘Chemistry for Windows 6.1’ 1,; 2007, Oy Finland, Outokumpu Research.
34.
ClarkS. J., SegallM. D., PickardC. J., HasnipP. J., ProbertM. J., RefsonK. and PayneM. C.: ‘First principles methods using CASTEP’, Z. Kristallogr., 2005, 220, (5–6), 567–570.
35.
PerdewJ. P., BurkeK. and ErnzerhofM.: ‘Generalized gradient approximation made simple’, Phys. Rev. Lett., 1997, 78, (7), 1396.
36.
ZouJ., ZhangG. J., VleugelsJ. and Van der BiestO.: ‘High temperature strength of hot pressed ZrB2–20vol% SiC ceramics based on ZrB2 starting powders prepared by different carbo/boro-thermal reduction routes’, J. Eur. Ceram. Soc., 2013, 33, (10), 1609–1614.
37.
KimY. W., ChunY. S., NishimuraT., MitomoM. and LeeY. H.: ‘High-temperature strength of silicon carbide ceramics sintered with rare-earth oxide and aluminum nitride’, Acta Mater., 2007, 55, (2), 727–736.
