In this study, densification behaviour of the in situ MgAl2O4 formation zero cement castable (ZCC) in the presence of TiO2 was analysed. Using a 2 wt-% content of TiO2 increased the bulk density of the brick to 3·10 g cm−3 and decreased the porosity to ∼15·7%. Alternatively, a 2 wt-% TiO2 addition modified the firing shrinkage. X-ray diffraction (XRD) analysis of the fired samples demonstrated that MgAl2O4 spinel and Mg2TiO4 inverse spinel structures also formed, as well as the formation of Al2TiO5 in 2 wt-% TiO2 addition of castables. The SEM investigations of fired samples were carried out to compare the effect of TiO2 addition and in situ phase formation on the physicomechanical properties of castables. The effect of TiO2 content on the mechanism of the slag penetration of ZCC for a steel ladle was examined, and the penetration layer was chemically analysed.
ZhangS and LeeWE: ‘Spinel-containing refractories’, in‘Refractories handbook’, 215–257, New York, Marcel Dekker Inc.
2.
MaitraS, DasS and SenA: ‘The role of TiO2 in the densification of low cement Al2O3–MgO spinel castable’, Ceram. Int., 2007, 33, 239–243.
3.
FernandesHR, TulyaganovDU, FerreiraJMF: ‘The role of P2O5, TiO2 and ZrO2 as nucleating agents on microstructure and crystallization behavior of lithium disilicate-based glass’, J. Mater. Sci., 2013, 48, 765–773.
4.
KalpaklıY, GökmenS and ÖzgenS: ‘Effect of binder type and other parameters in synthesis of magnesite chromite refractories from process waste’, J. Eur. Ceram. Soc., 2002, 22, 755–759.
SkalaRD, LiD, LowMA: ‘Diffraction, structure and phase stability studies on aluminium titanate’, J. Eur. Ceram. Soc., 2009, 29, 67–75.
7.
NaghizadehR, RezaieHR and Golestani-fardF: ‘The influence of composition, cooling rate and atmosphere on the synthesis and thermal stability of aluminum titanate’, Mater. Sci. Eng. B, 2009, B157, 20–25.
8.
AnezirisCG, PfaffE and MaierHR: ‘Ceramics materials in the system ZrO2–TiO2–Al2O3 for applications in the ferrous and nonferrous metallurgy’, Key Eng. Mater., 1997, 132–136, 1829–1833.
9.
AnezirisCG, ScharflW and UllrichB: ‘Microstructure evaluation of Al2O3 ceramics with Mg-PSZ and TiO2 additions’, J. Eur. Ceram. Soc., 2007, 27, 3191–3199.
10.
OhyaY and NakagawaZ: ‘Grain boundary microcracking due to thermal expansion anisotropy in aluminium titanate ceramics’, J. Am. Ceram. Soc., 1987, 70, (8), C184–C186.
11.
SegadeasAM, MorelliMR and KaminamiRGA: ‘Combustion synthesis of aluminium Titanate’, J. Eur. Ceram. Soc., 1998, 18, 771–781.
12.
KorimT: ‘Effect of Mg2+ and Fe3+ ions on formation mechanism of aluminium titanate’, Ceram. Int., 2009, 35, 1671–1675.
13.
TsetsekouA: ‘A comparison study of tialite ceramics doped with various oxide material and tialite–mullite composites: microstructural, thermal and mechanical properties’, J. Eur. Ceram. Soc., 2005, 25, 335–348.
14.
BuscagliaV, CaraccioloF and LenoiM: ‘Synthesis, sintering and expansion of Al0.8Mg0.6Ti1.6O5: a low-thermal-expansion material resistant to thermal decomposition’ J. Mater. Sci., 1997, 32, 6525–6531.
15.
BuscagliaV, NanniP and BattilanaG: ‘Reaction sintering of aluminium titanate. I: effect of MgO addition’, J. Eur. Ceram. Soc., 1994, 13, 411–417.
16.
GiordanoL, VivianiM, BottinoC, BuscagliaMT, BuscagliaV and NanniP: ‘Microstructure and thermal expansion of Al2TiO5–MgTi2O5 solid solution obtained by reaction sintering’, J. Eur. Ceram. Soc., 2002, 22, 1811–1822.
HuangYX and SenosAMR: ‘Effect of the powder precursor characteristics in the reaction sintering of aluminum titanate’, Mater. Res. Bull., 2002, 37, 99–111.
19.
DuanR.-G, ZhanG.-D, KuntzDJ, KearBH and MukherjeeAK: ‘Spark plasma sintering (SPS) consolidated ceramic composites from plasma-sprayed matastable Al2TiO5 powder and nano-Al2O3, TiO2 and MgO powders’, Mater. Sci. Eng. A, 2004, A373, 180–186.
20.
KalpaklıY: ‘Comparative study for physical properties and corrosion mechanism of synthetic and in situ MgAl2O4 spinel formation zero cement refractory castables’, Ironmaking Steelmaking B, 2010, 34B, (6), 414–424.
21.
GolubovicA and RadovicM: ‘The growth of Mg2TiO4 single crystals using a four-mirror Furnace’, J. Serb. Chem. Soc., 2011, 76, (11), 1561–1566.
22.
YılmazS: ‘Corrosion of high alumina-spinel castables by steel ladle slag’, Ironmaking Steelmaking, 2006, 33, (2), 151–156.
23.
BerezhoniAS and GulkoNV: ‘Phase diagram of the system MgO–Al2O3–TiO2’, Ukrain. Khim. Zhur., 1955, 2192, 162.
24.
CullityBD: ‘Elements of X-ray diffraction’, 388–392; 1959, Boston, MA, Addison-Wesley Publishing Company Inc.
25.
MoriJ, WatanabeW, YoshimuraM, OguchiY and KawakamiT: ‘Material design of monolithic refractories for steel ladle’, Bull. Am. Ceram. Soc., 1990, 69, (7), 1172–1176.
