Silicon carbide is one of the most important ceramics used as structural and functional materials in a wide variety of applications. Many studies have reported the densification of SiC using oxide and nonoxide additives such as the Al2O3, B4C and Al–B–C system. However, it is difficult to densify SiC at temperatures below 2000°C without sintering additives even if spark plasma sintering (SPS) is used. The authors attempted to densify SiC using colloidal processing and SPS without sintering additives. A commercially available SiC powder with the average particle size of 0·55 μm was used as the starting material. The densities of the green body prepared by slip casting and the sintered body by SPS were 65·5 and 98·7% respectively.
LangeF. F.: ‘Hot-pressing behavior of silicon carbide powders with additions of aluminium oxide’, J. Mater. Sci., 1975, 10, 314–320.
2.
TanakaH.: ‘Silicon carbide powder and sintered materials’, J. Ceram. Soc. Jpn, 2011, 119, 218–233.
3.
HirataY., MatunagaN., HidakaN., TabataS. and SameshimaS.: ‘Processing of high performance silicon carbide,’ J. Ceram. Soc. Jpn, 2008, 116, 665–673.
4.
LimK.-Y., KimY.-W., KimK. J. and YuJ. H.: ‘Effect of in situ-synthesized nano-size SiC addition on density and electrical resistivity of liquid-phase sintered silicon carbide ceramics’, J. Ceram. Soc. Jpn, 2011, 119, 965–967.
5.
NishimuraT., MitomoM., HirotsuruH. and KawaharaM.: ‘Fabricaton of silicon nitride nanoceramics by spark plasma sintering’, J. Mater. Sci. Lett., 1995, 14, 1047–1047.
6.
KimB.-N., HiragaK., MoritaK. and YoshidaH.: ‘Spark plasma sintering of transparent alumina’, Scr. Mater., 2007, 57, 607–610.
7.
GrassoS., HuC., VasylkivO., SuzukiT. S., GuoS., NishimuraT. and SakkaY.: ‘High-hardness B4C textured by a strong magnetic field technique’, Scr. Mater., 2011, 64, 256–259.
8.
HanY. H., NagataM., UekawaN. and KakegawaK.: ‘Eutectic Al2O3-GdAlO3 composite consolidated by combined rapid quenching and spark plasma sintering technique’, Br. Ceram. Trans., 2004, 103, 219–222.
9.
HuC., SakkaY., JangB., TanakaH., NishimuraT., GuoS. and GrassoS.: ‘Microstructure and properties of ZrB2–SiC and HfB2–SiC composites fabricated by spark plasma sintering (SPS) using TaSi2 as sintering aid’, J. Ceram. Soc. Jpn, 2010, 118, 997–1001.
10.
WuW.-W., ZhangG.-J., KanY.-M., WangP.-L., VanmeenselK., VleugelsJ. and Van der BiestO.: ‘Synthesis and microstructural features of ZrB2–SiC-based composites by reactive spark plasma sintering and reactive hot pressing’, Scr. Mater., 2007, 57, 317–320.
11.
ZavaliangosA., ZhangJ., KrammerM. and GrozaJ. R.: ‘Temperature evolution during field activated sintering’, Mater. Sci. Eng. A, 2004, A379, 218–228.
12.
VanmeenselK., LaptevA., HennickeJ., VleugelsJ. and Van der BiestO.: ‘Modelling of the temperature distribution during field assisted sintering’, Act Mater., 2005, 53, 4379–4388.
13.
MaizzaG., GrassoS. and SakkaY.: ‘Moving finite-element mesh model for aiding spark plasma sintering in current control mode of pure ultrafine WC powder’, J. Mater. Sci., 2009, 44, 1219–1236.
14.
GrassoS., SakkaY., MaizzaG. and HuC.: ‘Pressure effect on the homogeneity of spark plasma-sintered tungsten carbide powder’, J. Am. Ceram. Soc., 2009, 92, 2418–2421.
15.
ZouY., HiraoK., ToriyamaM. and TanakaH.: ‘Very rapid densification of nanometer silicon carbide powder by pulse electric current sintering’, J. Am. Ceram. Soc., 2000, 83, 654–656.
16.
TamariN., TanakaT., TanakaK., KondohI., KawaharaM. and TokitaM.: ‘Effect of spark plasma sintering on densification and mechanical properties of silicon carbide’, J. Ceram. Soc. Jpn, 1995, 103, 740–742.
17.
OhyanagiM., YamamotoT., KitauraH., KoderaY., IshiiT. and MunirZ. A.: ‘Consolidation of nanostructured SiC with disorder-order transformation’, Scr. Mater., 2004, 50, 111–114.
18.
HuismanW., GrauleT. and GaucklerL. J.: ‘Centrifugal slip casting of zirconia (TZP)’, J. Eur. Ceram. Soc., 1989, 13, 33–39.
19.
AksayI., LangeF. F. and DavisB. I.: ‘Uniformity of Al2O3-ZrO2 composites by colloidal filtration’, J. Am. Ceram. Soc., 1983, 66, C190–C192.
20.
LangeF. F.: ‘Powder processing science and technology for increased reliability’, J. Am. Ceram. Soc., 1989, 72, 3–15.
21.
KonsztowiczI. J. and LangloisR.: ‘Effects of hetroflocculation of powders on mechanical properties of zirconia alumina composites’, J. Mater. Sci., 1996, 31, 1633–1641.
22.
LangeF. F. and MillerK. T.: ‘Pressure filtration: consolidation kinetics and mechanics’, Am. Ceram. Soc. Bull., 1987, 66, 1498–1504.
23.
CesaramoI.III, AksayI. A. and BleierA.: ‘Stability of aqueous-Al2O3 suspensions with poly(methacrylic acid) polyelectrolyte’, J. Am. Ceram. Soc., 1988, 71, 250–255.
24.
LidenE., CarlstromE., EklundL., NybergB. and CarlssonR.: ‘Homogeneous distribution of sintering additives in liquid-phase sintered silicon carbide’, J. Am. Ceram. Soc., 1995, 78, 1761–1768.
25.
SameshimaS., KeisukeM. and YoshihiroH.: ‘Sinterability of SiC powder coated uniformly with Al ions’, J. Mater. Res., 1998, 13, 816–820.
26.
ApetzR. and van BruggenM. P. B.: ‘Transparent alumina: a light-scattering model’, J. Am. Ceram. Soc., 2003, 86, 480–486.
27.
BadamiD. V.: ‘X-ray studies of graphite formed by decomposing silicon carbide’, Carbon, 1965, 3, 53–57.
28.
RoosenA. and BowwnH. K.: ‘Influence of various consolidation techniques on the green microstructure and sintering behavior of alumina powders’, J. Am. Ceram. Soc., 1988, 71, 970–977.
