In heat and power production, oil shale combustion forms substantial amounts of solid waste, including fly ash. The present paper is dedicated to the manufacturing of frit derived glass ceramics from melting high amounts of this waste (65–67 wt-%) combined with inexpensive minerals, such as rhyolite (33–35 wt-%). Owing to a surface mechanism of crystallisation, fine powders led to glass ceramics with high strength and reliability, even for rapid treatments (fast heating, at a rate of 40°C min−1, followed by 30 min holding stage). To minimise the presence of pressing and demoulding induced defects, the tiles were prepared by incorporating binders, i.e. polyethylene glycol or kaolin, to the frit mixtures. Finally, the stabilising effect of recycled borosilicate glass powders, mixed with waste derived glass powders, was also investigated with promising results for the production of a chemically stable material.
YenT. F., Oil Shale (Developments in Petroleum Science, 5), Elsevier, Amsterdam, 1976. ISBN 9780444414083.
2.
World Energy Council. Survey of energy resources executive summary, (2010) ISBN 978 0 946121 021. URL http://www.worldenergy.org/.
3.
HowarthR. W., IngraffeaA. and EngelderT.: Natural gas: Should fracking stop?, Nature, 2011, 477, 271–273.
4.
Aunela-TapolaL. A., FrandsenF. J. and HasanenE. K.: Trace metal emissions from the Estonian oil shale fired power plant, Fuel Process. Technol., 1998, 57, 1–24.
5.
AdamsonJ., IrhaN., AdamsonK., SteinnesE. and KirsoU.: Effect of oil shale ash application on leaching behavior of arable soils: an experimental study. Oil Shale, 2010, 27, 250–257.
6.
BlinovaI., BityukovaL., KasemetsK., IvaskA., KäkinenA., KurvetI., BondarenkoO., KanarbikL., SihtmäeM., AruojaV., SchvedeH. and KahruA.: Environmental hazard of oil shale combustion fly ash, J. Hazard. Mater., 2012, 229–230, 192–200.
OtsA.: Oil shale as a power fuel, Oil Shale, 2006, 22, 367–368.
9.
GorokhovskyA. V., GorokhovskyV. A., MescheryakovD. V., Mendez-NonellJ., Escalante-GarciaJ. I., Pech-CanulM. I. and Vargas-GutierrezG.: Inorganic wastes in manufacturing of glass-ceramics: slurry of phosphorous fertilizer production and oil shale ash, Mater. Lett., 2001, 51, 281–284.
10.
GorokhovskiiA. V., GorokhovskiiV. A., MescheryakovD. V. and KopchekchiA. A.: Glass-ceramics based on oil shale ash. Glass Ceram., 2002, 59, 191–193.
11.
GorokhovskyA. V., Escalante-GarciaJ. I., Mendez-NonellJ., GorokhovskyV. A. and MescheryakovD. V.: Foamed glass-ceramic materials based on oil shale by-products. Glass Sci. Technol., 2002, 75, 259–262.
12.
LuanJ., LiA., SuT. and CuiX.: Synthesis of nucleated glass-ceramics using oil shale fly ash. J. Hazard. Mater., 2010, 173, 427–432.
13.
HölandW. and BeallG.: ‘Glass-ceramic technology’; 2002, Westerville, OH, The American Ceramic Society.
14.
HreglichS. and CioffiF.: Continuous glass fibres from waste and their application in reinforced materials. Adv. Appl. Ceram., 2009, 108, 22–26.
15.
FernandesH. R., TulyaganovD. U. and FerreiraJ. M. F.: Production and characterisation of glass ceramic foams from recycled raw materials, Adv. Appl. Ceram., 2009, 108, 9–13.
16.
VasilopoulosK. C., TulyaganovD. U., AgathopoulosS., KarakassidesM. A., RibeiroM., FerreiraJ. M. F. and TsipasD.: Vitrification of low silica fly ash: Suitability of resulting glass ceramics for architectural or electrical insulator applications. Adv. Appl. Ceram., 2009, 108, 27–32.
17.
BernardoE., PontikesY. and AngelopoulosG. N.: Optimisation of low temperature sinter crystallisation of waste derived glass. Adv. Appl. Ceram., 2012, 108, 472–478.
18.
BernardoE.: Fast sinter-crystallization of a glass from waste materials. J. Non-Cryst. Solids, 2008, 354, 3486–3490.
19.
GutzowI., PascovaR., KaramanovA. and SchmelzerJ.: The kinetics of surface induced sinter-crystallization and the formation of glass-ceramic materials. J. Mater. Sci., 1998, 33, 5265–5273.
20.
KaramanovA.: Granite like materials from hazardous wastes obtained by sintercrystallisation of glass frits. Adv. Appl. Ceram., 2009, 108, 14–21.
21.
KuusikR., UibuM. and KirsimäeK.: Characterization of oil shale ashes formed at industrial-scale CFBC boilers. Oil Shale, 2005, 22, 407–419.
22.
BarsoumM. W.: ‘Fundamentals of ceramics’; 2003, London, Institute of Physics.
23.
RasbandW. S.: ImageJ, 1997–2011, US National Institutes of Health, Bethesda, MA, USA.http://imagej.nih.gov/ij/
24.
“Manual sampling and preparation and analysis of eluates” UNI 10802, 2004. “Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)” UNI EN 12457-2, 2004.
25.
BernardoE.: Fast sinter-crystallization of a glass from waste materials. J. Non-Cryst. Solids, 2008, 354, 3486–3490.
26.
BernardoE., ScarinciG., EdmeE., MichonU. and PlantyN.: Fast Sintered Gehlenite Glass-Ceramics from Plasma-Vitrified Municipal Solid Waste Incinerator Fly Ashes. J. Am. Ceram. Soc., 2009, 92, 528–530.
27.
BernardoE. and ScarinciG.: Fast sinter crystallisation of waste glasses. Adv. Appl. Ceram., 2008, 107, 344–349.
28.
RingT. A.: ‘Fundamentals of ceramic powder processing and synthesis’; 1996, San Diego, CA, Academic Press.
29.
ShackelfordJ. F. and DoremusR. H.: ‘Ceramic and glass materials’; 2010, New York, Springer.
30.
BernardoE., BonomoE. and DattoliA.: Optimisation of sintered glass-ceramics from an industrial waster glass. Ceram. Int., 2010, 36, 1675–1680.
31.
HanS., KimC. and KwonD.: Thermal/oxidative degradation and stabilization of polyethylene glycol, Polymer, 1997, 38, 317–323.
32.
ChenX., ChadwickT. C., WilsonR. M., HillR. G. and CattellM. J.: Crystallization and flexural strength optimization of fine-grained leucite glass-ceramics for dentistry, Dent. Mater., 2011, 27, 1153–1161.
33.
QuinnG. D.: Weibull Strength Scaling for Standardized Rectangular Flexure Specimens. J. Am. Ceram. Soc., 2003, 86, 508–10.
34.
‘Ceramic tiles – Part 4: determination of modulus of rupture and breaking strength’, ISO 10545-4:2004, ISO, Geneva, Switzerland, 2004.
35.
‘Criteria for acceptance of waste at landfills according to Italian regulation’, D. M. 28 September 2010.
36.
BernardoE. and Dal MaschioR.: Glass-ceramics from vitrified sewage sludge pyrolysis residues and recycled glasses, Waste Manage., 2011, 31, 2245–2252.
