This paper reviews different methodologies for the fabrication of various ceramic one-dimensional (1D) nanostructures (nanotubes/fibres/wires/belts, etc.) produced by using preceramic polymers. Diverse processing approaches together with a wide range of precursor types enable the fabrication of 1D nanostructures with varied morphology, composition, purity as well as yield. The strategies used are based on three different methods; starting with the utilisation of decomposition gases which are released upon pyrolysing the preceramic polymer precursors at high temperatures, with the absence or presence of a catalytic metal source. The second is the template modulated synthesis routes (i.e. infiltration of the polymeric precursor melt or solution inside a template porosity, polymer to ceramic conversion followed by the removal of the template), and the last strategy discussed is electrospinning.
RiedelR, IonescuE, ChenI.-W:‘Modern trends in advanced ceramics’, in ‘Ceramics science and technology’ Vol. 1, ‘Structures’(, RiedelR, ed), et al., 3–38; 2008, Weinheim, Wiley-VCH Verlag GmbH & Co. KGaA.
4.
SchulzM: ‘Polymer derived ceramics in MEMS/NEMS – a review on production processes and application’, Adv. Appl. Ceram., 2009, 108, (8), 454–460.
5.
ZieglerG, KleebeHJ, MotzG, MüllerH, TraβlS, WeibelzahlW: ‘Synthesis, microstructure and properties of SiCN ceramics prepared from tailored polymers’, Mater. Chem. Phys., 1999, 61, (1), 55–63.
6.
ColomboP, MeraG, RiedelR, SoraruGD: ‘Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics’, J. Am. Ceram. Soc., 2010, 93, (7), 1805–1837.
PivinJC, ColomboP, SoraruGD: ‘Comparison of ion irradiation effects in silicon-based preceramic thin films’, J. Am. Ceram. Soc., 2000, 83, (4), 713–720.
9.
MonthiouxM, DelverdierO: ‘Thermal behavior of (organosilicon) polymer-derived ceramics. V: main facts and trends’, J. Eur. Ceram. Soc., 1996, 16, (7), 721–737.
10.
DankoGA, SilberglittR, ColomboP, PippelE, WoltersdorfJ: ‘Comparison of microwave hybrid and conventional heating of preceramic polymers to form silicon carbide and silicon oxycarbide ceramics’, J. Am. Ceram. Soc., 2000, 83, (7), 1617–1625.
11.
ColomboP, MartucciA, FogatoO, VilloresiP: ‘Silicon carbide films by laser pyrolysis of polycarbosilane’, J. Am. Ceram. Soc., 2001, 84, (1), 224–226.
12.
TeraudsK, Jimenez-SanchezPE, RajR, VakifahmetogluC, ColomboP: ‘Giant piezoresistivity of polymer-derived ceramics at high temperatures’, J. Eur. Ceram. Soc., 2010, 30, (11), 2203–2207.
ColomboP, SoraruGD, RiedelR, Kleebe (eds.)HJ: ‘Polymer derived ceramics. from nano-structure to applications’, 489; 2009, Lancaster, PA, DESTech Publications.
15.
VakifahmetogluC, PippelE, WoltersdorfJ, ColomboP: ‘Growth of 1D-nanostructures in porous polymer derived ceramics by catalyst-assisted-pyrolysis. Part I: iron catalyst’, J. Am. Ceram. Soc., 2010, 93, (4), 959–968.
LiD, McCannJT, XiaY, MarquezM: ‘Electrospinning: a simple and versatile technique for producing ceramic nanofibers and nanotubes’, J. Am. Ceram. Soc., 2006, 89, (6), 1861–1869.
ChengQ.-M, InterranteLV, LienhardM, ShenQ, WuZ: ‘Methylene-bridged carbosilanes and polycarbosilanes as precursors to silicon carbide–from ceramic composites to SiC nanomaterials’, J. Eur. Ceram. Soc., 2005, 25, (2–3), 233–241.
21.
YenH.-M, JouS, ChuC.-J: ‘Si-O-C nanotubes from pyrolyzing polycarbosilane in a mesoporous template’, Mater. Sci. Eng. B, 2005, B122, (3), 240–245.
22.
CaiKF, LeiQ, ZhangLC: ‘Ultra long SiC/SiO2 core-shell nanocables from organic precursor’, J. Nanosci. Nanotechnol., 2005, 5, (11), 1925–1928.
23.
CaiKF, ZhangAX, YinJL: ‘Ultra thin and ultra long SiC/SiO2 nanocables from catalytic pyrolysis of poly(dimethyl siloxane)’, Nanotechnology, 2007, 18, (48), 485601–485606.
24.
LiF, WenG, SongL: ‘Growth of nanowires from annealing SiBONC nanopowders’, J. Cryst. Growth, 2006, 290, (2), 466–472.
25.
CaiKF, LeiQ, ZhangAX: ‘A simple route to ultra long SiC nanowires’, J. Nanosci. Nanotechnol., 2007, 7, 580–583.
BirotM, PillotJ.-P, DunoguesJ: ‘Comprehensive chemistry of polycarbosilanes, polysilazanes, and polycarbosilazanes as precursors of ceramics’, Chem. Rev., 1995, 95, (5), 1443–1477.
37.
RiedelR, MeraG, HauserR, KlonczynskiA: ‘Silicon-based polymer-derived ceramics: synthesis properties and applications-a review’, J. Ceram. Soc. Jpn, 2006, 114, (1330), 425–444.
38.
YajimaS, OkamuraK, HayashiJ, OmoriM: ‘Synthesis of continuous SiC fibers with high tensile strength’, J. Am. Ceram. Soc., 1976, 59, (7–8), 324–327.
39.
LiH, ZhangL, ChengL, WangY, YuZ, HuangM, TuH, XiaH: ‘Effect of the polycarbosilane structure on its final ceramic yield’, J. Eur. Ceram. Soc., 2008, 28, (4), 887–891.
40.
BlumYD, SchwartzKB, LaineRM: ‘Preceramic polymer pyrolysis. Part 1: pyrolytic properties of polysilazanes’, J. Mater. Sci., 1989, 24, (5), 1707–1718.
41.
BahloulD, PereiraM, GoursatP: ‘Preparation of silicon carbonitrides from an organosilicon polymer: II, thermal behavior at high temperatures under argon’, J. Am. Ceram. Soc., 1993, 76, (5), 1163–1168.
42.
BahloulD, PereiraM, GoursatP, Choong Kwet YiveN, CorriuR: ‘Preparation of silicon carbonitrides from an organosilicon polymer: I, thermal decomposition of the cross-linked polysilazane’, J. Am. Ceram. Soc., 1993, 76, (5), 1156–1162.
43.
VakifahmetogluC, MenapaceI, HirschA, BiasettoL, HauserR, RiedelR, ColomboP: ‘Highly porous macro- and micro-cellular ceramics from a polysilazane precursor’, Ceram. Int., 2009, 35, (8), 3281–3290.
SeyferthD: ‘Birth, death and transfiguration: the synthesis of preceramic polymers, their pyrolysis and their conversion to ceramics’, Proc. 2nd Eur. Ceram. Soc. Conf., 567–599; 1991, Köln, Deutsche Keramische Gesellschaft.
VakifahmetogluC, ColomboP: ‘A direct method for the fabrication of macro-porous SiOC ceramics from preceramic polymers’, Adv.Eng. Mater., 2008, 10, (3), 256–259.
48.
OtoishiS, TangeY: ‘Effect of a catalyst on the formation of SiC whiskers from polycarbosilane. nickel ferrite as a catalyst’, Bull. Chem. Soc. Jpn, 1999, 72, (7), 1607–1613.
49.
ZhengJ, KramerMJ, AkincM: ‘In situ growth of SiC whisker in pyrolyzed monolithic mixture of AHPCS and SiC’, J. Am. Ceram. Soc., 2000, 83, (12), 2961–2966.
50.
ZhouW, ZhangY, NiuX, MinG: ‘One-dimensional sic nanostructures: synthesis and properties’, in ‘One-dimensional nanostructures, lecture notes in nanoscale science and technology’, (ed. , WangZ M, ed), 17–59; 2008, London, Springer.
51.
OtoishiS, TangeY: ‘Growth rate and morphology of silicon carbide whiskers from polycarbosilane’, J. Cryst. Growth, 1999, 200, (3–4), 467–471.
52.
WagnerRS, EllisWC: ‘Vapor-liquid-solid mechanism of single crystal growth’, Appl. Phys. Lett., 1964, 4, (5), 89–90.
53.
JouS, HsuCK: ‘Preparation of carbon nanotubes from vacuum pyrolysis of polycarbosilane’, Mater. Sci. Eng. B, 2004, B106, (3), 275–281.
54.
ZhuS, XiH.-A, LiQ, WangR: ‘In situ growth of β-SiC nanowires in porous SiC ceramics’, J. Am. Ceram. Soc., 2005, 88, (9), 2619–2621.
55.
YaoX, TanS, HuangZ, DongS, JiangD: ‘Growth mechanism of β-SiC nanowires in SiC reticulated porous ceramics’, Ceram. Int., 2007, 33, (6), 901–904.
56.
YoonB.-H, ParkC.-S, KimH.-E, KohY.-H: ‘In situ synthesis of porous silicon carbide (SiC) ceramics decorated with SiC nanowires’, J. Am. Ceram. Soc., 2007, 90, (12), 3759–3766.
57.
LiG.-Y, LiX.-D, WangH, LiuL: ‘Long SiC nanowires synthesized from off-gases of the polycarbosilane-derived SiC preparation’, Appl. Phys. A: Mater. Sci. Process., 2010, 98A, (2), 293–298.
58.
MishraR, TiwariR, SaxenaA: ‘Synthesis of Fe–SiC nanowires via Precursor Route’ J. Inorg. Organomet. Polym. Mater., 2009, 19, (2), 223–227.
59.
YangW, MiaoH, XieZ, ZhangL, AnL: ‘Synthesis of silicon carbide nanorods by catalyst-assisted pyrolysis of polymeric precursor’, Chem. Phys. Lett., 2004, 383, (5–6), 441–444.
60.
WangH, XieZ, YangW, FangJ, AnL: ‘Morphology Control in the Vapor-Liquid-Solid Growth of SiC Nanowires’, Cryst. Growth Des., 2008, 8, (11), 3893–3896.
61.
LuckeJ, HackerJ, SuttorD, ZieglerG: ‘Synthesis and characterization of silazane-based polymers as precursors for ceramic matrix composites’, Appl. Organomet. Chem., 1997, 11, (2), 181–194.
62.
YangW, XieZ, LiJ, MiaoH, ZhangL, AnL: ‘Growth of platelike and branched single-crystalline Si3N4 whiskers’, Solid State Commun., 2004, 132, (3–4), 263–268.
63.
YangW, XieZ, MiaoH, ZhangL, JiH, AnL: ‘Synthesis of single-crystalline silicon nitride nanobelts via catalyst-assisted pyrolysis of a polysilazane’, J. Am. Ceram. Soc., 2005, 88, (2), 466–469.
YangW, XieZ, LiJ, MiaoH, ZhangL, AnL: ‘Ultra-long single-crystalline α-Si3N4 nanowires: derived from a polymeric precursor’, J. Am. Ceram. Soc., 2005, 88, (6), 1647–1650.
66.
YangW, GaoF, WangH, ZhengX, XieZ, AnL: ‘Synthesis of ceramic nanocomposite powders with in situ formation of nanowires/nanobelts’, J. Am. Ceram. Soc., 2008, 91, (4), 1312–1315.
CaiKF, HuangLY, ZhangAX, YinJL, LiuH: ‘Ultra long SiCN nanowires and SiCN/SiO2 nanocables: synthesis, characterization, and electrical property’, J. Nanosci. Nanotechnol., 2008, 8, 6338–6343.
75.
ZhuN, PengZ, WangC, FuZ, MiaoH: ‘Preparation and characterization of bundled one-dimensional Si3N4 single-crystalline nanowires by catalytic pyrolysis of a polymer precursor’, Solid State Sci., 2009, 11, (6), 1094–1097.
PengZ, ZhuN, FuX, WangC, FuZ, QiL, MiaoH: ‘Growth and mechanism of network-like branched Si3N4 nanostructures’, J. Am. Ceram. Soc., 2010, 93, (8), 2264–2267.
78.
PengZ, FuX, ZhuN, GuoX, WangC, FuZ: ‘Preparation and growth mechanism of clustered one-dimensional SiOx amorphous nanowires by catalytic pyrolysis of a polymer precursor’, J. Non-Cryst. Solids, 2009, 355, (43–44), 2156–2159.
HaberechtJ, KrumeichF, StalderM, NesperR: ‘Carbon nanostructures on high-temperature ceramics – a novel composite material and its functionalization’, Catal. Today, 2005, 102–103, 40–44.
81.
FanY, WangY, LouJ, XuS, ZhangL, AnL, HeinrichH: ‘Formation of silicon-doped boron nitride bamboo structures via pyrolysis of a polymeric precursor’, J. Am. Ceram. Soc., 2006, 89, (2), 740–742.
82.
SchefflerM, GreilP, BergerA, PippelE, WoltersdorfJ: ‘Nickel-catalyzed in situ formation of carbon nanotubes and turbostratic carbon in polymer-derived ceramics’, Mater. Chem. Phys., 2004, 84, (1), 131–139.
83.
BergerA, PippelE, WoltersdorfJ, SchefflerM, CrommeP, GreilP: ‘Nanoprocesses in polymer-derived Si-O-C ceramics: electronmicroscopic observations and reaction kinetics’, Phys. Status Solidi A, 2005, 202A, (12), 2277–2286.
84.
SegatelliMG, RadovanovicE, GonçalvesMdo C, YoshidaIVP: ‘Investigation of the morphological changes promoted by heating of Si-C-O ceramics derived from a phenyl-rich hybrid polymer. Effect of Ni in the polymeric precursor’, J. Eur. Ceram. Soc., 2009, 29, (15), 3279–3287.
85.
VakifahmetogluC, CarturanS, PippelE, WoltersdorfJ, ColomboP: ‘Growth of 1D-nanostructures in porous polymer derived ceramics by catalyst-assisted-pyrolysis. Part II: cobalt catalyst’, J. Am. Ceram. Soc., 2010, 93, (11), 3709–3719.
86.
ColomboP, VakifahmetogluC, CostacurtaS: ‘Fabrication of ceramic components with hierarchical porosity’, J. Mater. Sci., 2010, 45, (20), 5425–5455.
BechelanyM, BernardS, BrioudeA, CornuD, StadelmannP, CharcossetC, FiatyK, MieleP: ‘Synthesis of boron nitride nanotubes by a template-assisted polymer thermolysis process’, J. Phys. Chem. C, 2007, 111C, (36), 13378–13384.
89.
ForsthoefelKM, PenderMJ, SneddonLG: ‘Chemical precursor routes to nanostructured non-oxide ceramics’, ‘Functional nanostructured materials through multiscale assembly and novel patterning techniques’, MRS Proc., 2002, 728, 59–64.
90.
WangH, LiX.-D, KimT.-S, KimD.-P: ‘Inorganic polymer-derived tubular SiC arrays from sacrificial alumina templates’, Appl. Phys. Lett., 2005, 86, (17), 173103–173104.
91.
ElyassiB, KimTW, SahimiM, TsotsisTT: ‘Effect of polystyrene on the morphology and physical properties of silicon carbide nanofibers’, Mater. Chem. Phys., 2009, 118, (1), 259–263.
92.
PashchankaM, EngstlerJ, SchneiderJJ, SioziosV, FaselC, HauserR, KinskiI, RiedelR, LauterbachS, KleebeH.-J, FlegeS, EnsingerW: ‘Polymer-derived SiOC nanotubes and nanorods via a template approach’, Eur. J. Inorg. Chem., 2009, 2009, (23), 3496–3506.
93.
SarkarS, ChunderA, FeiW, AnL, ZhaiL: ‘Superhydrophobic mats of polymer-derived ceramic fibers’, J. Am. Ceram. Soc., 2008, 91, (8), 2751–2755.
94.
GuronMM, WeiX, WelnaD, KrogmanN, KimMJ, AllcockH, SneddonLG: ‘Preceramic polymer blends as precursors for boron-carbide/silicon-carbide composite ceramics and ceramic fibers’, Chem. Mater., 2009, 21, (8), 1708–1715.
95.
AhmadZ, NangrejoM, EdirisingheM, StrideE, ColomboP, ZhangH: ‘Engineering a material for biomedical applications with electric field assisted processing’, Appl. Phys. A: Mater. Sci. Process., 2009, 97A, (1), 31–37.
96.
ShinD.-G, RiuD.-H, KimH.-E: ‘Web-type silicon carbide fibers prepared by the electrospinning of polycarbosilanes’, J. Ceram. Process. Res., 2008, 9, (2), 209–214.
97.
LuP, HuangQ, MukherjeeA, HsiehY.-L: ‘Synthesis of nickel nanoparticles supported on nanoporous silicon oxycarbide (SiCO) sheath core fibers’, J. Phys. Chem. C, 2010, 114C, (27), 11776–11782.
