Electrophoretic deposition (EPD) is an attractive forming process to fabricate plate shaped binary functionally graded materials (FGMs) from suitable stable suspensions. In the present work, the capability to produce Al2O3 and ZrO2 functionally graded bulk material by means of EPD from a non‐aqueous stable suspension based on 2‐butanone, n‐butylamine and cellulose nitrate solution is presented. The EPD processing parameters and sintering are described, and the density of the FGM composite, hardness, toughness and residual stresses are measured using indentation methods on cross‐sections of the sample. Scanning electron microscopy confirmed that the sintered body is an FGM.
PutS, VleugelsJ, van der BiestO: ‘Microstructural engineering of functionally graded materials by electrophoretic deposition’, J. Mater. Process. Technol., 2003, 143–144, 572–577.
2.
VanmeenselK, AnnéG, JiangD, VleugelsJ, van der BiestO: ‘Processing of a graded ceramic cutting tool in the Al2O3–ZrO2–Ti(C,N) system by electrophoretic deposition’, Mater. Sci. Forum, 2005, 492–493, 705–710.
3.
AnnéKVG, VleugelsJ, van der BiestO: ‘Electrophoretic deposition as a novel near net shaping technique for functionally graded biomaterials’, Key Eng. Mater., 2006, 314, 213–218.
4.
PutJVS, van der BiestO: ‘Functionally graded WC–Co materials produced by electrophoretic deposition’, Scr. Mater., 2001, 2001, 1139–1145.
5.
PutS, VleugelsJ, van der BiestO: ‘Electrophortic shaping of functionally graded hard metals’, Sci. Technol. Brief, 2001, 3, 14–17.
6.
AnnéG, VanmeenselK, VleugelsJ, van der BiestO: ‘Electrophoretic deposition as a novel near net shaping technique for functionally graded biomaterials’, Mater. Sci. Forum, 2005, 492–493, 213–218.
UchikoshiYST: ‘Phosphate esters as dispersants for the cathodic electrophoretic deposition of alumina suspension’, Am. Ceram. Soc., 2008, 91, 1923–1926.
9.
HeavensSN: ‘Electrophoretic deposition as a processing route for ceramics’ in ‘Advanced ceramic processing and technology’, (ed. , BinnerJ G P), 255–283; 1990, Park Ridge, NJNoyes Publications.
10.
BoccacciniAR, ZhitomirskyI: ‘Application of electrophoretic and electrolytic deposition techniques in ceramics processing’, Curr. Opin. Solid State Mater. Sci., 2002, 6, 251–260.
11.
VleugelsJ, AnnéG, PutS, van der BiestO: ‘Thick plate‐shaped Al2O3/ZrO2 composites with continuous gradient processed by electrophoretic deposition’, Mater. Sci. Forum, 2003, 423–425, 171–176.
12.
HvizdošP, JonssonD, AngladaM, AnnéG, van der BiestO: ‘Mechanical properties and thermal shock behaviour of an alumina/zirconia functionally graded material prepared by electrophoretic deposition’, J. Eur. Ceram. Soc., 2007, 27, 1365–1371.
13.
AnnéKVG, NeirinckB, van der BiestO, VleugelsJ: ‘Ketone‐amine based suspensions for electrophoretic deposition of Al2O3 and ZrO2’, Eur. Ceram. Soc., 2006, 26, 3531–3537.
14.
morellR: ‘Handbook of properties of technical and engineering ceramics Part 1’;. 1985, LondonHMSO.
15.
CasellasD, NaglMM, LlanesL, AngladaM: ‘Fracture toughness of alumina and ZTA ceramics: microstructural coarsening effects’, J. Mater. Process. Technol., 2003, 143–144, 148–152.
16.
de MoraesMCCSB, FilhoJD, de OliveiraLG: ‘Mechanical properties of alumina–zirconia composites for ceramic abutments’, Mater. Res., 2003, 7, 643–649.
17.
AnstisGR, ChantikulP, LawnBR, MarshallDB: ‘A critical evaluation of indentation techniques for measuring fracture toughness. Part I: direct crack measurements’, J. Am. Ceram. Soc., 1981, 64, 533–538.
18.
KrellA: ‘Load dependence of hardness in sintered submicrometer Al2O3 and ZrO2’, J. Am. Ceram. Soc., 1995, 78, 1417–1419.
19.
CelliA, TucciA, EspositoL, PalmonariC: ‘Fractal analysis of cracks in alumina‐zirconia composites’, J. Eur. Ceram. Soc., 2003, 23, 469–479.
