Sage Journals: Discover world-class research

Abstract

Nanostructured powders were deposited using thermal spraying to produce coatings having internal features of nanosized dimensions. Several ceramic based materials were studied, including WC–12 wt-%Co, TiO₂, hydroxyapatite, Al₂O₃–13 wt-%TiO₂ and yttria stabilised zirconia. The effect of the thermal spray conditions on the microstructure, phase composition, properties and performance was investigated. Key nanostructural features of the coatings were identified and their potential benefit in contributing to enhanced behaviour explored. Issues relating to design strategies and process control for engineering these types of coatings with performance characteristics tailored for targeted applications are discussed.

Keywords

NANOSTRUCTURED COATINGS THERMAL SPRAY PROCESSING STRATEGIES PROCESS-PROPERTY-PERFORMANCE RELATIONSHIPS

Get full access to this article

View all access options for this article.

References

Jia

and Fischer

T. E.

: Wear, 1996, 200, 206–214.

Webster

T. J.

, Ergun

, Doremus

R. H.

, Siegel

R. W.

and Bizios

: Biomaterials, 2000, 21, 1803.

Lee

, Choi

, Lee

and Kim

: Surf Coat. Technol, 2003, 173, 192–200.

Kingery

W. D.

, Bowen

H. K.

and Uhlmann

D. R.

: ‘Introduction to ceramics’, 2nd edn, 739; 1976, New York, John Wiley & Sons.

Cottrell

A. H.

: ‘The mechanical properties of matter’, 326–332; 1981, New York, Robert E. Krieger Publishing Co.

Cottrell

A. H.

: ‘The mechanical properties of matter’, 345; 1981, New York, Robert E. Krieger Publishing Co.

Marple

B. R.

and Lima

R. S.

: J. Therm. Spray Technol, 2005, 14, (1), 67–76.

Anstis

G. R.

, Chantikul

, Lawn

B. R.

and Marshall

D. B.

: J. Am. Ceram. Soc., 1981, 64, (9), 533–543.

‘Standard test method for adhesion or cohesion strength of thermal spray coatings’, ASTM standard C

633–01, ASTM, West Conshohocken, PA, USA, 2001.

10.

Marple

B. R.

, Hawthorne

H. M.

and Xie

: ‘Thermal spray 2004: Advances in technology and application’, 846–851; 2004, Materials Park, OH, ASM International.

11.

Bansal

, Padture

N. P.

and Vasiliev

: Acta. Mater., 2003, 51, 2959–2970.

12.

Sauer

J. P.

and Sahoo

: Thermal Spray 2001: New Surfaces for a New Milennium (ed. Berndt

C. C.

, Khor

K. A.

and Lugscheider

E. F.

) 2001, Materials Park, OH, USA, ASM International, p. 791–796.

13.

Borel

M. O.

, Nicoll

A. R.

, Schlapfer

H. W.

and Schmid

R. K.

: Surf Coat. Technol., 1989, 39–40, 117–126.

14.

Lima

R. S.

and Marple

B. R.

: Proc. 1st Int. Surf. Eng. Cong. and 13th IFHTSE Cong., (ed. N. Dahotre et al), 495–504; 2003, Materials Park, OH, ASM International.

15.

Jordan

E. H.

, Gell

, Sohn

Y. H.

, Goberman

, Shaw

, Jiang

, Wang

, Xiao

T. D.

and Strutt

: Mater. Sci Eng. A, 2001,A301, 80–89.

16.

‘Sulzer Metco

2043 — CoNiCrAlY-boron nitride/polyester compo-site powder’, Technical Bulletin no. 10–636, Sulzer Metco, Westbury, NY, USA, 2000.

17.

Building on 100 years of success: Proc. 2006 Int Thermal Spray Conf., (ed. B. R. Marple et al.) ; May 15–18, 2006, (Seattle, WA, USA), ASM International, Materials Park, OH, 2006.

18.

Gross

K. A.

, Walsh

and Swarts

: J. Therm. Spray Technol., 2004, 13, 190–199.

19.

Webster

T. J.

, Siegel

R. W.

and Bizios

: Biomaterials, 1999, 20, 1221–1227.

20.

Lima

R. S.

, Khor

K. A.

, Li

, Cheang

and Marple

B. R.

: Mater. Sci Eng. A, 2005, A396, 181–187.

21.

Cleries

, Fernandez-Pradas

J. M.

, Sardin

and Morenza

J. L.

: Biomaterials, 1998, 19, 1483–1487.

22.

Webster

T. J.

, Ergun

, Doremus

R. H.

, Siegel

R. W.

and Bizios

: J. Biomed Mater. Res., 2000, 51, 475–483.

23.

, Khor

K. A.

and Cheang

: Mater. Sci. Eng. A, 2000, A293, 71–80.

24.

Legoux

J. G.

, Chellat

, Lima

R. S.

, Marple

B. R.

, Bureau

M. N.

, Shen

and Candeliere

G. A.

: J. Therm. Spray Technol., 2006, 15, 628–633.

Engineering nanostructured thermal spray coatings: Process–property–performance relationships of ceramic based materials

Abstract

Keywords

Get full access to this article

References