The polytypism of SiC, phase transformation of ZrB2 and the interfaces between SiC and ZrB2 were investigated using high resolution TEM in a hot pressed 10 vol.%SiC‐ZrB2 composite. In most cases, no grain boundary interphases between hexagonal ZrB2 and 6H‐SiC phases were observed with SiC being both inter‐ and intragranular. Occasionally, 6H‐SiC transformed into 3C and 15R and hexagonal ZrB2 transformed into cubic ZrB. High resolution TEM showed no grain boundary interphases in most regions. Energy dispersive X‐ray spectroscopy and electron energy‐loss spectroscopy analyses showed the presence of oxygen throughout the sample. The phase transformation of SiC and ZrB2, and the interphase formation between SiC and ZrB2 grains are discussed.
LiuQ, HanWN, HuP: ‘Microstructure and mechanical properties of ZrB2–SiC nanocomposite ceramic’, Scr. Mater., 2009, 61, (7), 690–692.
3.
ZhangXH, WangZ, HuP, HanWB, HongCQ: ‘Mechanical properties and thermal shock resistance of ZrB2–SiC ceramic toughened with graphite flake and SiC whiskers’, Scr. Mater., 2009, 61, (8), 809–812.
4.
MarschallJ, PejakovicDA, FahrenholtzWG, HilmasGE, ZhuSM, RidgeJ, FletcherDG, AsmaCO, ThomelJ: ‘Oxidation of ZrB2–SiC ultrahigh‐temperature ceramic composites in dissociated air’, J. Thermophys. Heat Transf., 2009, 23, (2), 267–278.
5.
ZhangSC, HilmasGE, FahrenholtzWG: ‘Pressureless sintering of ZrB2–SiC ceramics’, J. Am. Ceram. Soc., 2008, 91, (1), 26–32.
6.
ZhangSC, HilmasGE, FahrenholtzWG: ‘Pressureless densification of zirconium diboride with boron carbide additions’, J. Am. Ceram. Soc., 2006, 89, (5), 1544–1550.
7.
ZhangXH, WengL, HanJ, MengSH, HanWB: ‘Preparation and thermal ablation behavior of HfB2–SiC‐based ultra‐high‐temperature ceramics under severe heat conditions’, Int. J. Appl. Ceram. Technol., 2009, 6, (2), 134–144.
8.
WengL, ZhangXH, HanJC, HanWB, HongCQ: ‘The effect of B4C on the microstructure and thermo‐mechanical properties of HfB2‐based ceramics’, J. Alloys Compd, 2009, 473, (1–2), 314–318.
9.
HanJC, HuP, ZhangXH, MengSH: ‘Characteristics and mechanisms of dynamic oxidation for ZrB2–SiC based UHTC’, High‐Perform. Ceram. V, 2008, 368–372, 1722–1726.
10.
GuoSQ, KagawaY, NishimuraT, ChungD, YangJM: ‘Mechanical and physical behavior of spark plasma sintered ZrC–ZrB2–SiC composites’, J. Eur. Ceram. Soc., 2008, 28, (6), 1279–1285.
ZhangXH, QuQ, HanJC, HanWB, HongCQ: ‘Microstructural features and mechanical properties of ZrB2–SiC–ZrC composites fabricated by hot pressing and reactive hot pressing’, Scr. Mater., 2008, 59, (7), 753–756.
13.
LicheriR, OrruR, MusaC, LocciAM, CaoG: ‘Consolidation via spark plasma sintering of HfB2/SiC and HfB2/HfC/SiC composite powders obtained by self‐propagating high‐temperature synthesis’, J. Alloys Compd, 2009, 478, (1–2), 572–578.
14.
ScitiD, SilvestroniL, GuicciardiS, FabbricheDD, BellosiA: ‘Processing, mechanical properties and oxidation behavior of TaC and HfC composites containing 15 vol% TaSi2 or MoSi2’, J. Mater. Res., 2009, 24, (6), 2056–2065.
15.
LiHB, ZhangLT, ChengLF, WangYG: ‘Ablation resistance of different coating structures for C/ZrB2–SiC composites under oxyacetylene torch flame’, International J. Appl. Ceram. Technol., 2009, 6, (2), 145–150.
16.
PaveseA, FinoP, BadiniC, OrtonaA, MarinoG: ‘HfB2/SiC as aprotective coating for 2D C‐f/SiC composites: effect of high temperature oxidation on mechanical properties’, Surf. Coat. Technol., 2008, 202, (10), 2059–2067.
17.
RussoG, MarinoG: ‘The USV program and UHTC development’, Proc. 4th Eur. Workshop on ‘Hot structures and thermal protection systems for space vehicles’, 29–38; 2003, Palermo, ESA Publications.
18.
GuoWM, ZhangGJ, WangPL: ‘Microstructural evolution and grain growth kinetics in ZrB2–SiC composites during heat treatment’, J. Am. Ceram. Soc., 2009, 92, (11), 2780–2783.
19.
ZhangH, YanYJ, HuangZR, LiuXJ, JiangDL: ‘Properties of ZrB2–SiC ceramics by pressureless sintering’, J. Am. Ceram. Soc., 2009, 92, (7), 1599–1602.
20.
ZhuT, XuL, ZhangXH, HanWB, HuP, WengL: ‘Densification, microstructure and mechanical properties of ZrB2–SiCw ceramic composites’, J. Eur. Ceram. Soc., 2009, 29, (13), 2893–2901.
21.
ZhuT, LiWJ, ZhangXH, HuP, HongCQ, WengL: ‘Damage tolerance and R‐curve behavior of ZrB2–ZrO2 composites’, Mater. Sci. Eng. A, 2009, A516, (1–2), 297–301.
LiangJ, WangC, WangY, JingL, LuanX: ‘The influence of surface heat transfer conditions on thermal shock behavior of ZrB2–SiC–AlN ceramic composites’, Scr. Mater., 2009, 61, (6), 656–659.
24.
ZhangXH, WangZ, SunX, HanWB, HongCQ: ‘Thermal shock behavior of ZrB2–20 vol.% SiC–15 vol.% graphite flake by hot pressing’, Int. J. Modern Phys. B, 2009, 23B, (6–7), 1160–1165.
25.
LiWJ, ZhangY, ZhangXH, HongCQ, HanWB: ‘Thermal shock behavior of ZrB2–SiC ultra‐high temperature ceramics with addition of zirconia’, J. Alloys Compd, 2009, 478, (1–2), 386–391.
26.
GuoWM, ZhangGJ, KanYM, WangPL: ‘Oxidation of ZrB2 powder in the temperature range of 650–800°C’, J. Alloys Compd, 2009, 471, (1–2), 502–506.
27.
ParthasarathyTA, RappRA, OpekaM, KeransRJ: ‘Effects of phase change and oxygen permeability in oxide scales on oxidation kinetics of ZrB2 and HfB2’, J. Am. Ceram. Soc., 2009, 92, (5), 1079–1086.
28.
CarneyCM: ‘Oxidation resistance of hafnium diboride‐silicon carbide from 1400 to 2000°C’, J. Mater. Sci., 2009, 44, (20), 5673–5681.
29.
KarlsdottirSN, HalloranJW: ‘Oxidation of ZrB2–SiC: ‘Influence of SiC content on solid and liquid oxide phase formation’, J. Am. Ceram. Soc., 2009, 92, (2), 481–486.
ZhangG.‐J, DengZ.‐Y, KondoN, YangJ.‐F, OhjiT: ‘Reactive hot pressing of ZrB2–SiC composites’, J. Am. Ceram. Soc., 2000, 83, (9), 2330–2332.
32.
YanY: ‘Pressureless sintering of high‐density ZrB2–SiC ceramic composites’, J. Am. Ceram. Soc., 2006, 89, (11), 3589–3592.
33.
HwangS: ‘Improved processing, and oxidation‐resistance of ZrB2 ultra‐high temperature ceramics containing SiC nanodispersoids’, Mater. Sci. Eng. A, 2007, A464, (1–2), 216–224.
34.
WuWW, ZhangGJ, KanYM, WangPL, VanmeenselK, VleugelsJ, van der BiestO: ‘Synthesis and microstructural features of ZrB2–SiC‐based composites by reactive spark plasma sintering and reactive hot pressing’, Scr. Mater., 2007, 57, (4), 317–320.
35.
MonteverdeF: ‘Resistance to thermal shock and to oxidation of metal diborides‐SiC ceramics for aerospace application’, J. Am. Ceram. Soc., 2007, 90, (4), 1130–1138.
36.
MonteverdeF, BellosiA: ‘Oxidation of ZrB2‐based ceramics in dry air’, J. Electrochem. Soc., 2003, 150, (11), B552–B559.
37.
MonteverdeF, BellosiA: ‘The resistance to oxidation of an HfB2–SiC composite’, J. Eur. Ceram. Soc., 2005, 25, (7), 1025–1031.
ZimmermannJW, HilmasGE, FahrenholtzWG, MonteverdeF, BellosiA: ‘Fabrication and properties of reactively hot pressed ZrB2–SiC ceramics’, J. Eur. Ceram. Soc., 2007, 27, (7), 2729–2736.
40.
ZhangSC, HilmasGE, FahrenholtzWG: ‘Pressureless sintering of ZrB2–SiC ceramics’, J. Am. Ceram. Soc., 2008, 91, (1), 26–32.
41.
AnishchikVM, DorozhkinNN: ‘Electronic structure of TiB2 and ZrB2’, Phys. Status Solidi B, 2006, 160B, (1), 173–177.
42.
ChingWY, XuYN, RulisP, OuyangL: ‘The electronic structure and spectroscopic properties of 3C, 2H, 4H, 6H, 15R and 21R polymorphs of SiC’, Mater Sci. Eng. A, 2006, A422, 147–156.
43.
GengL, ZhangJ: ‘A study of the crystal structure of a commercial b‐SiC whisker by high‐resolution TEM’, Mater. Chem. Phys., 2004, 84, (2–3), 243–246.
44.
HongMM: ‘Stacking fault energy of 6H‐SiC and 4H‐SiC single crystals’, Philos. Mag. A, 2000, 80A, (4), 919.
45.
GunnaesAA: ‘Morphology and structure of airborne β‐SiC fibres produced during the industrial production of non‐fibrous silicon carbide’, J. Mater. Sci., 2005, 40, (22), 6011.
46.
ChampionY, HagegeS: ‘HREM analysis of a cubic‐hexagonal (ZrB–ZrB2) interface using the coincidence approach’, Acta Mater., 1997, 45, (6), 2621–2631.
47.
ChampionY, HagegeS, MasseM: ‘Structural analysis of phases and heterophase interfaces in the zirconium‐boron system’, J. Mater. Sci., 1998, 33, (16), 4035–4041.
48.
ChampionY, HagegeS: ‘Experimental determination and symmetry related analysis of orientation relationships in heterophase interfaces: a case study in the Zr–B system’, Acta Mater., 1996, 44, (10), 4169–4179.
