The electroless copper plating using sodium hypophosphite as the reductant and sodium citrate as the chelating agent was studied by gravimetric and electrochemical measurements. The effects of temperature, pH, boric acid, citrate, hypophosphite, nickel catalyst and copper concentration were tested. A chemical model was defined to determine the composition of all ionic species in the bath solution. The kinetics of the electroless copper deposition was interpreted on the basis of the dehydrogenation of the reductant, mixed potential theory and in the ionic speciation of the bath. Scanning electron microscopy, X-ray microanalysis by energy spectroscopy dispersion and X-ray diffraction applied on surfaces show that the deposits are composed by binary (Ni–Cu) and ternary alloys (Cu–Ni–P) and that their crystallinity depends on phosphorus content.
CaiJ., LanM., ZhangD. and ZhangW.: ‘Electrical resistivity and dielectric properties of helical microorganism cells coated with silver by electroless plating’, Appl. Surf. Sci., 2012,
258, 8769–8774.
2.
RohanJ. F., O'RiordanG. and BoardmanJ.: ‘Selective electroless nickel deposition on copper as a final barrier/bonding layer material for microelectronics applications’, Appl. Surf. Sci., 2002,
185, 289–297.
3.
BazzaouiM., MartinsJ. I., BazzaouiE. A., AlbouriniA., WangR. and HongP. D.: ‘A simple method for acrylonitrile butadiene styrene metallisation’, Surf. Coat. Technol., 2013,
224, 71–76.
4.
BazzaouiM., MartinsJ. I., BazzaouiE. A. and AlbouriniA.: ‘Environmentally friendly process for nickel electroplating of ABS’, Appl. Surf. Sci., 2012,
258, 7968–7975.
5.
UiB., LiJ., ZhaoQ., LiangT. and WangL.: ‘Effect of CuSO4 content in the plating bath on the properties of composites from electroless plating of Ni-Cu-P on birch veneer’, BioResources, 2014,
9, 2949–2959.
6.
HuB., SunR., YuG., LiuL., XieZ., HeX. and ZhangX.: ‘Effect of bath pH and stabilizer on electroless nickel plating of magnesium alloys’, Surf. Coat. Technol., 2013,
228, 84–91.
7.
AbrantesL. M. and CorreiaJ. P.: ‘On the mechanism of electroless Ni-P plating’, J. Electrochem. Soc., 1994,
141, 2356–2360.
8.
Van Den MeerakkkerJ. E. A. M.: ‘On the mechanism of electroless plating. II. One mechanism for different reductants’, J. Appl. Electrochem., 1981,
11, 395–400.
9.
HungA., HungP. C. and OhnoI.: ‘Mechanism of hypophosphite-reduced electroless copper plating’, J. Electrochem. Soc., 1989,
136, 72–75.
10.
DumesicJ., KoutskyJ. A. and ChapmanT. W.: ‘The rate of electroless copper deposition by formaldehyde reduction’, J. Electrochem. Soc., 1974,
121, 1405–1412.
11.
ShaoZ., CaiZ., HuR. and WeiS.: ‘The study of electroless nickel plating directly on magnesium alloy’, Surf. Coat. Technol., 2014,
249, 42–47.
12.
TouirR., LarhzilH., EbntouhamM., CherkaouiM. and ChassaingE.: ‘Electroless deposition of copper in acidic solutions using hypophosphite reducing agent’, J. Appl. Electrochem., 2006,
36, 69–75.
13.
ShiG., LiW. and LuY.: ‘Fe-based surface activator for electroless nickel deposition on polyester: application to electromagnetic shielding’, Surf. Coat. Technol., 2014,
253, 221–226.
LevyD. J.: ‘Thin nickel films by hydrazine autocatalytic reduction’, Electrochem. Tech., 1963,
1, 38–42.
16.
YouL., GuoL., PreisserR. and AlkolkarR.: ‘Autocatalysis during electroless copper deposition using glyoxylic acid as reducing agent’, J. Electrochem. Soc., 2013,
160, D3004–D3008.
17.
SelvamM.: ‘Electroless silver deposition on ABS plastic using Co(II) as reducing agent’, Trans. Inst. Met. Finish., 2010,
88, 198–203.
18.
SoneM., KobayakawaK., SaitouM. and SatoY.: ‘Electroless copper plating using Fe(II) as a reducing agent’, Electrochim. Acta, 2004,
49, 233–238.
19.
HungC. Y., YuanH. C., Der LaiL. F., LoanR. M., NanC. K. and TautY. J.: ‘Electroless deposition of the copper sulfide coating on polyacrylonitrile with a chelating agent of triethanolamine and its EMI shielding effectiveness’, Thin Solid Films, 2009,
517, 4984–4988.
20.
CottonF. A., DanielsL. M., MurilloC. A. and QuesadaJ. F.: ‘Hexaaqua dipositive ions of the first transition series: new and accurate structures; expected and unexpected trends’, Inorg. Chem., 1993,
32, 4861–4867.
21.
WijnandsP. E. M., WoodJ. S., ReedijkJ. and MaaskantW. J. A.: ‘Disordered CuN6 Jahn-Teller centers in hexakis(1 methyltetrazole)copper(II)tetrafluoroborate: a temperature-dependent X-ray diffraction and EPR study’, Inorg. Chem., 1996,
35, 1214–1222.
22.
WagnerC. and TraudW.: ‘The analysis of corrosion procedures through the interaction of electrochemical partial procedures and on the potential difference of mixed electrodes’, Z. Electrochim., 1938,
44, 391–402.
23.
BardA. J. and FaulknerL. R.: ‘Electrochemical methods: fundamental and applications’; 1980, Toronto
, John Wiley & Sons Inc.
24.
DeanJ.-A.: ‘Lange's Handbook of Chemistry’, 11th edn, ; 1973, New York
, McGraw-Hill.
25.
AtkinsonK. E.: ‘An introduction to numerical analysis’; 2nd ed; 1989, Tronoto, Canada
, John Wiley & Sons Inc.
26.
JCPDS International Center for Diffraction Data, Swarthmore, ; 1997;. Pennsylvania, U. S. A., copper file no. 04–0836.
27.
YuH.-S., LuoS.-F. and WangY.-R.: ‘A comparative study on the crystallization behavior of electroless Ni–P and Ni–Cu–P deposits’, Surf. Coat. Technol., 2001,
148, 143–148.
28.
OhnoI., WakabayashiO. and HaruyamaS.: ‘Anodic oxidation of reductant in electroless plating’, J. Electrochem. Soc., 1985,
132, 2323–2330.
29.
ZengY., ZhengY., YuS., ChenK. and ZhouS.: ‘An ESR study of the electrocatalytic oxidation of hypophosphite on a nickel electrode’, Electrochem. Commun., 2002,
4, 293–295.
30.
GutzeitG.: ‘An outline of the chemistry involved in the process of catalytic nickel deposition from aqueous solution. Part (IV)’, Plating, 1960,
47, 63–70.
31.
TsuruY., NomuraM. and FoulkesF. R.: ‘Effects of boric acid on hydrogen evolution and internal stress in films deposited from a nickel sulfamate bath’, J. Appl. Electrochem., 2002,
32, 629–634.
32.
HawkinsD. T. and HultgrenR.: ‘Metals handbook’, 8th edn,
Vol. 8, ; 1973, Lyman, Taylor, American Society for Metals Park, Ohio, USA
.
33.
OkamatoH.: ‘Ni-P (nickel-phosphorus)’, J. Phase Equilib., 2010,
31, 200–201.
34.
LiJ. and KohlP. A.: ‘The deposition characteristics accelerated nonformaldehyde electroless copper plating’, J. Electrochem. Soc., 2003,
150, C558–C562.
35.
BratschS. G.: ‘Standard electrode potentials and temperature coefficients in water at 298·15 K’, J. Phys. Chem. Ref. Data, 1989,
18, 1–21.
