The Inconel 617 with plasma sprayed Al2O3–40%TiO2 (A40T) and NiCr–Cr2O3 coatings were investigated for the hot corrosion behaviour at 1000°C for gas turbine applications. The behaviour of the alloy under the mixed salt environment with and without V2O5 in Na2SO4 and NaCl was analysed by means of mass change per unit area, optical and SEM images along with X-ray diffraction and EDAX. Microstructural and EDAX analyses revealed presence of oxides, rich in Ni and Mo on the surface of the samples. The coated sample exhibited better corrosion resistance in A40T and NiCr – Cr2O3 coatings than bare alloy.
TaheriM, ValefiZ and Zangeneh-MadarK: ‘Influence of HVOF process parameters on microstructure and bond strength of NiCrAlY Coatings’, Surf. Engg., 2012, 28, (4), 266–272.
2.
ThirumalaikumarasamyD, ShanmugamK and BalasubramanianV: ‘Effect of atmospheric plasma spraying parameters on porosity level of alumina coatings’, Surf. Eng., 2012, 28, (10), 759–766.
3.
SamantaroyPK, GirijaS, KaulR and Kamachi MudaliU: ‘Enhancement of corrosion resistance of nickel based superalloys by laser surface melting’, Surf. Eng., 2013, 29, (7), 522–530.
4.
MonticelliC, BalboA and ZucchiF: ‘Corrosion and tribocorrosion behaviour of thermally sprayed ceramic coatings on steel’, Surf. Coat. Technol., 2011, 205, 3683–3691.
5.
HardwickeCU and LauY.-C: ‘Advances in thermal spray coatings for gas turbines and energy generation: a review’, J. Therm. Spray Technol., 2013, 22, (5), 564–576.
6.
MauerG and VaßenR: ‘Current developments and challenges in thermal barrier coatings’, Surf. Eng., 2011, 27, (7), 477–479.
7.
HabibKA, SauraJJ, FerrerC, DamraMS, GiménezE and CabedoL: ‘Comparison of flame sprayed Al2O3/TiO2 coatings: Their microstructure, mechanical properties and tribology behavior’, Surf. Coat. Technol., 2006, 201, 1436–1443.
8.
HindamH and WhittleDP: ‘Microstructure, adhesion and growth kinetics of protective scales on metals and alloys’, Oxid. Met., 1982, 18, (5–6), 245–284.
9.
ZhangJJ, WangZH and LinPH: ‘Effects of sealing on corrosion behaviour of plasma-sprayed Cr2O3–8TiO2 coating’, Surf. Eng., 2013, 29, (8), 594–599.
10.
ZhangJJ, WangZHP, LinH, SiLQ, ShenGJ, ZhouZH, JiangSQ and LuWH: ‘Corrosion of plasma sprayed NiCrAl/Al2O3–13 wt-%TiO2 coatings with and without sealing’, Surf. Eng., 2012, 28, (5), 345–350.
11.
SaralU and ToplanN: ‘Thermal cycle properties of plasma sprayed YSZ/Al2O3 thermal barrier coatings’, Surf. Eng., 2009, 25, (9), 541–547.
12.
CheC, WuGQ, QiHY, HuangZ and YangXG: ‘Effect of bond coat surface roughness on oxidation behaviour of air plasma sprayed thermal barrier coatings’, Surf. Eng., 2008, 24, (4), 276–279.
13.
WangY, LiMX and SuoHL: ‘Mechanical properties of YSZ thermal barrier coatings with segmented structure’, Surf. Eng., 2012, 28, (5), 329–333.
14.
XuY, MiaoQ, LiangWP, YangJJ and YaoZJ: ‘Interdiffusion performance and oxidation behaviours of NiCrAlY/Al coatings on γ-TiAl’, Surf. Eng., 2014, 30, (1), 64–70.
15.
MaheshRA, JayaganthanR and PrakashS: ‘High temperature oxidation studies on HVOF sprayed NiCrAl coatings on superalloys’, Surf. Eng., 2011, 27, (5), 332–339.
16.
HuangX, PuetzP, YangQ and TangZ: ‘Characterisation of transient oxide formation on NiCrAlY after heat treatment in vacuum’, Surf. Eng., 2011, 27, (5), 368–375.
17.
RahmanA, JayaganthanR, PrakashS, ChawlaV and ChandraR: ‘Cyclic high temperature oxidation behaviour of sputtered Cr/Al multilayer coatings on superalloy’, Surf. Eng., 2011, 27, (5), 393–401.
18.
KamalS, JayaganthanR and PrakashS: ‘Hot corrosion behaviour of D-gun sprayed NiCoCrAlYTa coated superalloys at 900°C in molten salt environment’, Surf. Eng., 2010, 26, (7), 453–462.
19.
MaheshRA, JayaganthanR and PrakashS: ‘Evaluation of hot corrosion behaviour of HVOF sprayed Ni–5Al and NiCrAl coatings in coal fired boiler environment’, Surf. Eng., 2010, 26, (6), 413–421.
20.
XieXY, GuoHB, GongSK and XuHB: ‘Hot corrosion behavior of double-ceramic-layer LaTi2Al9O19/YSZ thermal barrier coatings’, Chin. J. Aero., 2012, 25, 137–142.
21.
KaushalG, KaurN, SinghH and PrakashS: ‘Effect of zirconium addition in HVOF sprayed Ni-20Cr coating’, Surf. Eng., 2013, 29, (1), 46–54.
22.
MatthewsS, JamesB and HylandM: ‘High temperature erosion–oxidation of Cr3C2–NiCr thermal spray coatings under simulated turbine conditions’, Corros. Sci., 2013, 70, 203–211.
23.
Adam KhanM, SundarrajanS, NatarajanS, ParameswaranP and MohandassE: ‘Oxidation & hot corrosion behavior of nickel based superalloy for gas turbine applications’, Mater. Manuf. Proc., 2014, DOI: 10.1080/10426914.2014.901530.
24.
ShahH, ShamanianM and KermanpurA: ‘Characterisation of microstructure and mechanical properties of Inconel 617/310 stainless steel dissimilar welds’, Mater. Charact., 2011, 62, 425–431.
25.
KlowerJ, HusemannRU and BaderM: ‘Development of nickel alloys based on alloy 617 for components in 700C power plants’, Proc. Eng., 2013, 55, 226–231.
26.
RahmanMS, PriyadarshanG, RajaKS, NesbittC and MisraM: ‘Characterization of high temperature deformation behavior of INCONEL 617’, Mech. Mater., 2009, 41, 261–270.
27.
HigueroV, BelzunceFJ and RibaJ: ‘High temperature oxidation of plasma and HVOF thermal sprayed CoNiCrAlY coatings in simulated gas turbine and furnace environments’, Surf. Eng., 2008, 25, (4), 319–325.
