An effective method to enhance scratch resistance was developed using a 3-glycidyloxyproplytrimethoxysilane as a base on the formation of a transparent coating on glass substrate. The addition of silver nanoparticles improves further the scratch hardness of the thin film coating. The critical load obtained from the microscratch test increases from 2931 to 3319 mN upon the addition of silver nanoparticles. The size of silver nanoparticle was analysed using transmission electron microscope (TEM) and was found to be in the range of 20–40 nm. Addition of silver nanoparticles also increases the surface energy; hence the result enhances the hydrophobicity compared to substrate with only GLYMO coated on it.
SubramaniK. and AhmedW.:‘Chapter 1 - nanotechnology and the future of dentistry’, in ‘Emerging nanotechnologies in dentistry’, 1–14; 2012, Boston, William Andrew Publishing.
3.
GaneshV. A., RautH. K., NairA. S. and RamakrishnaS.:J. Mater. Chem., 2011, 21, (41), 16304–16322.
4.
RauS. R., VengadaesvaranB., NazironN. and ArofA.:Pigment Resin Technol., 2013, 42, (2), 111–116.
5.
ParkS.-J. and JinJ.-S.:J. Colloid Interf. Sci., 2001, 242, (1), 174–179.
6.
TeeD. I., MariattiM., AzizanA., SeeC. H. and ChongK. F.:Compos. Sci. Technol., 2007, 67, (11–12), 2584–2591.
7.
CuiH. and KesslerM. R.:Compos. Sci. Technol., 2012, 72, (11), 1264–1272.
XieY., HillC. A., XiaoZ., MilitzH. and MaiC.:Compos. A: Appl. Sci. Manuf., 2010, 41, (7), 806–819.
10.
LiuJ. and WuS.:‘The research of silicone rubber sealant for road joint’, Proc. 2010 International Conference on ‘Mechanic automation and control engineering (MACE)’, Wuhan, China, June 2010, IEEE, 796–799.
11.
RauS. R., VengadaesvaranB., PutehR. and ArofA. K.:J. Adhes., 2011, 87, (7–8), 755–765.
12.
KnetschM. L. and KooleL. H.:Polymers, 2011, 3, (1), 340–366.
13.
JainP. and PradeepT.:Biotechnol. Bioeng., 2005, 90, (1), 59–63.
14.
FulekarM.:‘Nanotechnology: importance and applications’; 2010, New Delhi, IK International Pvt Ltd.
15.
BhushanB.:‘Springer handbook of nanotechnology’; 2010, Berlin, Springer.
16.
MavaniK. and ShahM.:Int. J. Eng., 2013, 2, (3), 64–73.
17.
OnjunO. and PearsonR. A.:J. Adhes., 2010, 86, (12), 1178–1202.
18.
BushroaA. R., MasjukiH. H., MuhamadM. R. and BeakeB. D.:Surf. Coat. Technol., 2011, 206, (7), 1837–1844.
19.
RaoC., KulkarniG., ThomasP. J. and EdwardsP. P.:Chem. A Eur. J., 2002, 8, (1), 28–35.
20.
ZafariM., JafarpourM., BiazarE. and HeidariK. S.:J. Pure Appl. Microbiol., 2013, 7, (1), 143–149.
21.
SrivastavaA. and SinghV.:Ind. J. Pure Appl. Phys., 2007, 45, (9), 714.
22.
ChouJ. S. and LeeS. C.:J. Appl. Phys., 1995, 77, (4), 1805–1807.
23.
ZhuW. J., ZhouY., MaW. H., LiM. M., YuJ. and XieK. Q.:Adv. Mater. Res., 2012, 430, 873–876.
