Aluminium 6061 deposited by high pressure cold spray was analysed using a transmission electron microscope (TEM) to characterise its microstructure and response to annealing to 450°C in the plane of the deposition and perpendicular to the deposited layers. The cold sprayed deposition was also analysed with scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) analysis and differential scanning calorimeter (DSC). Segregation of the solute atoms (Mg and Si) at the grain boundaries during cold spraying was seen to play a crucial role in stabilising the deformation substructure until specific temperatures, and was found to have a significant effect on the annealing behaviour of the microstructure in the two different directions.
EasonP. D., FewkesJ. A., KennettS. C., EdenT. J., TelloK., KaufmanM. J. and TiryakioğluM.:‘On the characterization of bulk copper produced by cold gas dynamic spray processing in as fabricated and annealed conditions’, Mater. Sci. Eng. A, 2011, A528, 8174–8178.
3.
BakshiS. R., WangD., PriceT., ZhangD., KeshriA. K., ChenY., McCartneyD. G., ShipwayP. H. and AgarwalA.:‘Microstructure and wear properties of aluminum/aluminum–silicon composite depositionss prepared by cold spraying’, Surf. Coat. Technol., 2009, 204, 503–510.
4.
ZouY., QinW., IrissouE., LegouxJ. G., YueS. and SzpunarJ. A.:‘Dynamic recrystallization in the particle/particle interfacial region of cold-sprayed nickel depositions: electron backscatter diffraction characterization’, Scr. Mater., 2009, 61, 899–902.
5.
ZouY., GoldbaumD., SzpunarJ. A. and YueS.:‘Microstructure and nanohardness of cold-sprayed depositionss: electron backscattered diffraction and nanoindentation studies’, Scr. Mater., 2010, 62, 395–398.
6.
KingP. C., PooleA. J., HorneS., de NysR., GuliziaS. and JahediM. Z.:‘Embedment of copper particles into polymers by cold spray’, Surf. Coat. Technol., 2013, 216, 60–67.
7.
CincaaN., RebledbJ. M., EstradéS., PeiróF., FernándezJ. and GuilemanyaJ. M.:‘Influence of the particle morphology on the Cold Gas Spray deposition behavior of titanium on aluminum light alloys’, J. Alloys Compd, 2013, 554, 89–96.
8.
GoyalT., WaliaR. S. and SidhuT. S.:‘Surface roughness optimization of cold-sprayed depositionss using Taguchi method’, Int. J. Adv. Manuf. Technol., 2012, 60, 611–623.
9.
MoyC. K. S., CairneyJ., RanziG., JahediM. and RingerS. P.:‘Investigating the microstructure and composition of cold gas-dynamic spray (CGDS) Ti powder deposited on Al 6063 substrate’, Surf. Coat. Technol., 2010, 204, 3739–3749.
10.
AjdelsztajnL., JodoinB., KimG. E. and SchoenungJ. M.:‘Cold spray deposition of nanocrystalline aluminum alloys’, Metall. Mater. Trans. A, 2005, 36A, 657.
11.
AjdelsztajnL., ZúñigaA., JodoinB., and LaverniaE. J.:‘Cold gas dynamic spraying of a high temperature Al alloy’, Surf. Coat. Technol., 2006, 201, 2109–2116.
12.
BalaniK., AgarwalA., SealS. and KarthikeyanJ.:‘Transmission electron microscopy of cold sprayed 1100 aluminum depositions’, Scr. Mater., 2005, 53, 845–850.
13.
LejcekP.:‘Grain boundary segregation in metals’; 2010, New York, Springer-Verlag.
14.
NazarovA. A., RomanovA. E. and ValievR. Z.:‘On the structure, stress fields and energy of non-equilibrium grain boundaries’, Acta Metall., 1993, 41, 1033–1040.
15.
KirchheimR.:‘Reducing grain boundary, dislocation line and vacancy formation energies by solute segregation. I. Theoretical background’, Acta Mater., 2007, 55, 5129.
16.
KirchheimR.:‘Reducing grain boundary, dislocation line and vacancy formation energies by solute segregation: II. Experimental evidence and consequences’, Acta Mater., 2007, 55, 5139.
17.
ShvindlermanL. S., JannotE. and GottsteinG.:‘On precipitation-controlled grain size in the presence of solute segregation’, Acta Mater., 2007, 55, 3397–3401.
18.
HeoT. W., BhattacharyyaS. and ChenL. Q.:‘A phase field study of strain energy effects on solute-grain boundary interactions’, Acta Mater., 2011, 59, 7800–7815.
19.
SchäferJ., StukowskiA. and AlbeK.:‘Plastic deformation of nanocrystalline Pd–Au alloys: on the interplay of grain boundary solute segregation, fault energies and grain size’, Acta Mater., 2011, 59, 2957–2968.
20.
SauvageX. and IvanisenkoY.:‘The role of carbon segregation on nanocrystallisation of pearlitic steels processed by severe plastic deformation’, Mater. Sci., 2007, 42, 1615.
21.
SauvageaX., WildebG., DivinskibS. V., HoritacZ. and ValievdR. Z.:‘Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena’, Mater. Sci. Eng. A, 2012, A540, 1–12.
22.
RokniM. R., Zarei-HanzakiaA., RoostaeiA. A. and AbediH. R.:‘An investigation into the hot deformation characteristics of 7075 aluminum alloy’, Mater. Des., 2011, 32, 2339–2344.
23.
HockaufK., MeyerL. W., HockaufM. and HalleT.:‘Improvement of strength and ductility for a 6056 aluminum alloy achieved by a combination of equal-channel angular pressing and aging treatment’, Mater. Sci., 2010, 45, 4754–60.
24.
HumphreysF. J. and HatherlyM.:‘Recrystallization and related annealing phenomena’, 2nd edn; 2004, Amsterdam, Elsevier.
25.
WangX. L., LiuC. T., KeiderlingU., StoicaA. D., YangL., MillerM. K., FuC. L., MaD. and AnK.:‘Unusual thermal stability of nano-structured ferritic alloys’, J. Alloys Compd, 2012, 529, 96–101.
26.
ShaG., YaoL., LiaoX. Z., RingerS. P., DuanZ. C. and TerenceG.:‘Langdon segregation of solute elements at grain boundaries in an ultrafine grained Al–Zn–Mg–Cu alloy’, Ultramicroscopy, 2011, 111, 500–505.
27.
MaN., DregiaS. A. and WangY.:‘Solute segregation transition and drag force on grain boundaries’, Acta Mater., 2003, 51, 3687–3700.
28.
ZhangY. Y., WuX. K., CuiH. and ZhangJ. S.:‘Cold-spray processing of a high density nanocrystalline aluminum alloy 2009 depositions using a mixture of as-atomized and as-cryomilled powders’, Therm. Spray Technol., 2011, 20, 1125–1132.
29.
EmburyJ. D. and NicholsonR. B.:‘The nucleation of precipitates: the system Al–Zn–Mg’, Acta Metall., 1963, 11, 347.
30.
RokniM. R., Zarei-HanzakiaA. and AbediH. R.:‘Microstructure evolution and mechanical properties of back extruded 7075 aluminum alloy at elevated temperatures’, Mater. Sci. Eng. A, 2012, A532, 593–600.
31.
EtienneA., RadiguetB., CunninghamN. J., OdetteG. R. and PareigeP.:‘Atomic scale investigation of radiation-induced segregation in austenitic stainless steels’, Nucl. Mater., 2010, 406, 244.
32.
ShaG., MarceaR. K. W., GaoX., MuddleB. C. and RingeS. P.:‘Nanostructure of aluminium alloy 2024: segregation, clustering and precipitation processes’, Acta Mater., 2011, 59, 1659–1670.
33.
PanseriC., GattoF. and FederighiT.:‘Interaction between solute magnesium atoms and vacancies in aluminium’, Acta Metall., 1958, 6, 198.
34.
Purja PunG. P. and MishinY.:‘A molecular dynamics study of self-diffusion in the cores of screw and edge dislocations in aluminum’, Acta Mater., 2009, 57, 5531–5542.
35.
PicuR. C. and ZhangD.:‘Atomistic study of pipe diffusion in Al–Mg alloys’, Acta Mater., 2004, 52, 161.
36.
GaoY., ZhuangZ., LiuZ. L., YouX. C., ZhaoX. C. and ZhangZ. H.:‘Investigations of pipe-diffusion-based dislocation climb by discrete dislocation dynamics’, Int. J. Plast., 2011, 27, 1055–1071.
37.
FujitaT., HoritaZ. and LangdonT. G.:‘Characteristics of diffusion in Al–Mg alloys with ultrafine grain sizes’, Philos. Mag. A, 2002, 82A, 2249.
38.
RittnerJ. D. and SeidmanD. N.:‘Solute-atom segregation to <110> symmetric tilt grain boundaries’, Acta Mater., 1997, 45, 3191–3202.
39.
VarschavskyA. and DonosoE.:‘A calorimetric investigation on the kinetics of solute segregation to partial dislocations in Cu–3·34at%Sn’, Mater. Sci. Eng. A, 1998, A251, 208–215.
40.
PuigvíM. A., SerraA., de DiegoN., OsetskyY. u. N. and BaconD. J.:‘Features of the interactions between a vacancy and interstitial loops in metals’, Philos. Mag. Lett., 2004, 84, 257.
41.
GärtnerF., StoltenhoffT., VoyerJ., KreyeH., RiekehrS. and KoçakM.:‘Mechanical properties of cold-sprayed and thermally sprayed copper depositionss’, Surf. Coat. Technol., 2006, 200, 6770–6782.
42.
HudsonT. S., DudarevS. L. and SuttonA. P.:‘Confinement of interstitial cluster diffusion by oversized solute atoms’, Proc. R. Soc. Lond. A, 2004, 460A, 2457.
43.
AustK. T. and RutterJ. W.:Trans. AIME, 1959, 215, 119–127.
44.
EdwardsG. A., StillerK., DunlopG. L. and CouperM. J.:‘The precipitation sequence in Al–Mg–Si alloys’, Acta Mater., 1998, 46, 3893–3904.
