The article describes the research results of steel C30 boroaluminised by isothermal and thermocycle methods in powder mixtures. Thermocycling is performed in the range of 650–950°C. In this study, a comparative analysis of microstructure, composition of elements and microhardness of boroaluminised steels after various treatments is presented. A series of tensile tests and a plasticity estimation of boroaluminised layer were carried out.
BorisenokG. V., VasilyevL. A. and VoroshninL. G.: ‘Himiko-termicheskaya obrabotka metallov i splavov’; 1981, Moskva, Metallurgiya.
2.
PetrovaL.: ‘Progress in theory and practice of thermochemical treatment of steels’, Int. Heat Treat. Surf. Eng., 2012, 6, (4), 168–170.
3.
DearnleyP. A. and BellT.: ‘Engineering the surface with boron based materials’, Surf. Eng., 1985, 1, (3), 203–217.
4.
ZakharievZ., MarinovM., PenyashkiT. and TsokovPl.: ‘Simultaneous powdery boronaluminizing of steel stable in aluminum melts’, J. Alloys Compd, 2008, 459, 501–503.
5.
FedyukinV. K. and SmagorinskyM. E.: ‘Termotsiklicheskaya obrabotka metallov i detaley mashin’; 1989, Leningrad, Mashinostroenie.
6.
SizovI. G., MishigdorzhiynU. L., MakharovD. M. and DashievY. B.: ‘Sposob termotsiklicheskogo boroalitirovaniya izdeliy iz uglerodistyh staley’, RF Patent 2401319, 10 October 2010.
7.
SizovI. G., MishigdorzhiynU. L. and MaharovD. M.: ‘A study of thermocycling boroaluminizing of carbon steel’, Met. Sci. Heat Treat., 2012, 53, (11–12), 592–597.
8.
WismogrohoA. S., WidayatnoW. B., Zaini ThosinSuryadi, K. A., RochmanN. T. and SueyoshiH.: ‘Iron aluminide coating on Al by mechanical alloying’, Surf. Eng., 2011, 27, (2), 126–133.
9.
MartienssenW., EffenbergG. and IlyenkoS.: ‘Ternary alloy systems: phase diagrams, crystallographic and thermodynamic data’; 2008, Berlin/Heidelberg, Springer.
10.
KrukovichM. G., PrusakovB. A. and SizovI. G.: ‘Borated layers plasticity’; 2010, Moscow, Fizmatlit.
11.
Campos-SilvaI., Ortiz-DomínguezM., CimenogluH., Escobar-GalindoR., KeddamM., Elías-EspinosaM. and López-PerrusquiaN.: ‘Diffusion model for growth of Fe2B layer in pure iron’, Surf. Eng., 2011, 27, (3), 189–195.
12.
KartalG., TimurS., EryilmazO. L. and ErdemirA.: ‘Influence of process duration on structure and chemistry of borided low carbon steel’, Surf. Coat. Technol., 2010, 205, 1578–1583.
