The incorporation of N into Ni[N] solid solution by gaseous nitriding in NH3-H2 containing atmospheres, corresponding to a nitriding potential rN,0 at the tube furnace inlet, was studied at 450°C. For the encountered low N contents cN (<1 at.-%), validity of Henry's law is expected, i.e. proportionality of cN with the nitriding potential rN,0 of the gas inserted into the furnace. However, NH3 decomposition in the furnace, even at the temperature considered, which is usually neglected, leads to deviation from this proportionality, i.e. an effective rN<rN,0 operates. A scheme for obtaining the cN(rN) data from the experimental cN(rN,0) data is described.
MakishiT. and NakataK.: ‘Surface hardening of nickel alloys by means of plasma nitriding‘, Metall. Mater. Trans. A, 2004, 35A, 227–238.
2.
EliasenK. M., ChristiansenT. L. and SomersM. A. J.: ‘Low temperature gaseous nitriding of Ni based superalloys’, Surf. Eng., 2010, 26, 248–255.
3.
SinghV. and MeletisE. I.: ‘Synthesis, characterization and properties of intensified plasma-assisted nitrided superalloy Inconel 718’, Surf. Coat. Technol., 2006, 201, 1093–1101.
4.
KruppU. and ChristH. J.: ‘Internal nitridation of Ni-based alloys during high-temperature corrosion by nitrogen’, Adv. Eng. Mater., 1999, 3–4,194–198.
5.
SavvaG. C., WeatherlyG. C. and KirkaldyJ. S.: ‘Transition between internal and external nitridation of Ni–Ti alloys’, Metall. Mater. Trans. A, 1996, 27A, 1611–1622.
6.
ReedR. C.: ‘The superalloys: fundamentals and applications’, 1–28; 2006, Cambridge, Cambridge University Press.
7.
ThaiwatthanaS., LiX. Y., DongH. and BellT.: ‘Comparison studies on properties of nitrogen and carbon S-phase on low temperature plasma alloyed AISI 316 stainless steel’, Surf. Eng., 2002, 18, 443–437.
8.
DongH.: ‘S-phase surface engineering of Fe–Cr, Co–Cr and Ni–Cr alloys’, Int. Mater. Rev., 2010, 55, 65–98.
9.
KodentsovA. A., GulpenJ. H., CserhatiC., KivilahtiJ. K. and van LooF. J. J.: ‘High-temperature nitridation of Ni–Cr alloys’, Metall. Mater. Trans. A, 1996, 27A, 59–69.
10.
KodentsovA. A., van DalM. J. H., CserhatiC. s., KivilahtiJ. K. and van LooF. J. J.: ‘On nitrogen diffusion during the internal nitridation of Ni-based alloys’, Defect Diffus. Forum, 1997, 143–147, 1619–1624.
11.
WilliamsonD. L., DavisJ. A. and WiliburP. J.: ‘Effect of austenitic stainless steel composition on low-energy, high-flux, nitrogen ion beam processing’, Surf. Coat. Technol., 1998, 103–104, 178–184.
12.
LeroyC., CzerwiecT., GabetC., BelmonteT. and MichelH.: ‘Plasma assisted nitriding of Inconel 690’, Surf. Coat. Technol., 2001, 142–144, 241–247.
13.
MittemeijerE. J. and SlyckeJ. T.: ‘Chemical potentials and activities of nitrogen and carbon imposed by gaseous nitriding and carburizing atmospheres’, Surf. Eng., 1996, 12, 152–162.
14.
MittemeijerE. J. and SomersM. A. J.: ‘Thermodynamics, kinetics, and process control of nitriding’, Surf. Eng., 1997, 13, 483–497.
15.
SomersM. A. J. and MittemeijerE. J.: ‘Formation and growth of compound layer on nitrocarburizing iron: kinetics and microstructural evolution‘, Surf. Eng., 1987, 3, 123–137.
16.
LeineweberA., LienertF., GlockS.WoehrleT., SchaafP., WilkeM., MittemeijerE. J.: ‘X-ray diffraction investigations on gas nitrided nickel and cobalt’, Z. Kristallogr. Proc., 2011, 1, 293–298.
17.
LeineweberA., LienertF., ShangS. L., LiuZ. K. and MittemeijerE. J.: ‘Ni3N compound layers produced by gaseous nitriding of nickel substrates; layer growth, macrostresses and intrinsic elastic anisotropy’, J. Mater. Res., 2012, 27, 1531–1541.
18.
LehrerE.: ‘Über das Eisen-Wasserstoff-Ammoniak-Gleichgewicht’, Z. Elektrochem., 1930, 36, 383–392.
19.
HillertM. and JarlM.: ‘Thermodynamic analysis of iron–nitrogen system’, Metall. Mater. Trans. A, 1975, 6, 553–559.
20.
KooiB. J., SomersM. A. J. and MittemeijerE. J.: ‘An evaluation of the Fe–N phase diagram considering long-range order of N atoms in γ'-Fe4N1-x and ε-Fe2N1-z’, Metall. Mater. Trans. A, 1996, 27, 1063–1071.
21.
PrzyleckiZ.: ‘Uklad rownowagi NH3–H2–Fe–N’, Sesja Naukowa, Komisja Technologii Budowy Maszyn, 1979, 35–84.
22.
HosmaniS. S., SchacherlR. E. and MittemeijerE. J.: ‘Nitrogen uptake by an Fe–V alloy: quantitative analysis of excess nitrogen’, Acta Mater., 2006, 54, 2783–2792.
23.
LeineweberA., GressmannT. and MittemeijerE. J.: ‘Simultaneous control of the nitrogen and carbon activities during nitrocarburising of iron’, Surf. Coat. Technol., 2011, 206, 2780–2791.
24.
GrabkeH. J.: ‘Reaktionen von Ammoniak, Sticksoff, und Wasserstoff an der Oberfläche von Eissen‘, Ber. Bunsenges. Phys. Chem., 1968, 72, 533–541.
